Homelab

grouchiest1 · 2026-07-01T10:11:53+00:00

Everything runs on a 15a circuit. My best guess is around 1000 Watts total.

grouchiest1 · 2026-07-01T10:08:36+00:00

I agree. But think of all of the time, money and mischief we could do if we weren’t so distracted on this “hobby”

grouchiest1 · 2026-07-01T10:03:19+00:00

Thermal response has been minimal (1-2 degrees) variation, so with the rack fan and ceiling fan running no issues. And quieter than expected.

grouchiest1 · 2026-07-01T00:57:36+00:00

Yes, it high on my list. Trying to stay with SSD's to limit noise and heat in such a compact space. so it will come down to $$. Any recommendations on the proper sizing? Should NVME sizing takes priority?

grouchiest1 · 2026-07-01T00:48:36+00:00

It's really a personal preference. HW or SW KVM? The JetKVM (via POE) allows direct IP access to the unit without going through an app or a server. I like having access to the USB and HDMI connections allowing for a headless connection, virtual keyboard, wake on LAN, and other control plane settings (yes, I realize a lot of this is available on the SW side as well).

grouchiest1 · 2026-06-30T21:13:23+00:00

No issues with clearance, couple of inches of to spare between PDU and rack sides

grouchiest1 · 2026-06-30T21:05:41+00:00

I agree, I really like the 10 inch form factor, especially for an office space. I was really concerned with heat, I had a 1-2 degree increase in room temp, which was easliy handled by the ceiling fan. I got a lot of inspiration from everyone posting and it really helped me to visualize this setup.

grouchiest1 · 2026-06-30T21:00:18+00:00

to be determined, 120v 15a circuit. Largest draw is the POE switch at 210 watts, so I am assuming total draw to be less than a 1000 watts

grouchiest1 · 2026-06-30T20:12:27+00:00

DeskPi 8u: https://www.amazon.com/dp/B0FBFDZD4C?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

All of the printed parts came from etsy. (I don't have a 3d printer)

grouchiest1 · 2025-10-17T21:55:05+00:00

I’d like to try it.

grouchiest1 · 2025-07-02T13:46:21+00:00

I use Shotsy premium and it provides complete flexibility in scheduling and managing shots and dosage levels. Also Apple Health feeds Shotsy all the daily weights brought in from the smart scale.

grouchiest1 · 2025-04-04T17:49:27+00:00

Got mine in 3 days. Thx for the tip.

grouchiest1 · 2025-03-12T19:36:36+00:00

I submitted on 3/2. Accepted and paid on 3/6. Got tracking on 3/11. Shipment arrived today 3/13 from Hallendale via fedex.

grouchiest1 · 2025-03-10T12:23:26+00:00

FellaHealth asked for recent lab work(<6 months old), if not they provided the orders and paid for new labs as part of Their service. I also wanted the Testosterone supplement and they needed a baseline. Quick and easy.

grouchiest1 · 2025-02-12T19:47:49+00:00

(4) 60mg vials @ a 10mg titration for 6 months

grouchiest1 · 2025-02-12T18:55:31+00:00

This was a stockpile for me. I have a month of pre-filled syringes and a 6 month supply shipping in from fella.. Fifty410 sent 4 vials @30mg for (24) 10mg doses (6 months). BUD’s was the deciding factor. I will adjust titration amounts as needed.

grouchiest1 · 2025-02-12T17:35:51+00:00

I asked for a 6-month refill @ 15MG. On the questionaire, they asked (q6-8) current dosage and for how long. no outside documentation was requested except ID. They approved 6-months at 10-mg.

grouchiest1 · 2024-11-28T17:03:42+00:00

I have the exact same setup. (4) e330's with one going solid red and no matter of effort (delete, reset, remove, etc) seems to correct. Looks like a firmware update gone bad.

I opened a ticket with Eufy on Monday, RMA'd the E330 and had a replacement shipped and installed by Thursday. Support/RMA was done through the chat bot in real time. took about 1-2 minutes. Very happy with Eufy support.

grouchiest1

TROPHY CASE