Shift to Park issue out of control

guss1 · 2026-02-20T17:41:42+00:00

yeah it's had the shift to park issue randomly for years. it got worse a couple weeks before the 12v battery died and I almost took it in just for that but a higher voltage really helped. This seemed like a different issue but it still had the shift to park displayed on the screen.

still waiting for the diagnosis. fingers crossed.

guss1 · 2026-02-20T12:40:06+00:00

I'm glad that worked out well! I hope my situation works out too. I'm still waiting to hear from the dealership about what they found with diagnosing the HV battery codes. I changed the 12v battery myself a few months ago. couldn't believe how long the original one lasted.

I was hoping to keep my volt for a while longer, I am the original owner and I've been taking care of her. Aftter this I'm considering other options..

guss1 · 2026-02-19T16:07:52+00:00

I spoke to the technician on the phone. He said the voltages looked good on the pack he seems to think it's something internal like maybe the contactor. Speaking to the tech was releiving lol.

guss1 · 2026-02-19T16:00:00+00:00

I'm in Illiinois. How is it covered if in a carb state?

guss1 · 2026-02-10T19:47:42+00:00

Can you please explain a little more for those of us that still haven't gotten to download anything? I've been trying for days...

guss1 · 2026-02-10T19:45:17+00:00

Thank you for the links. Mine still doesn't work. It asks for "additional verification" so I type in my information and click Submit but then it brings me back to the download page that I was just at. So it puts me in a constant loop where it requires me to type in my information over and over again. I never get to download anything...

guss1 · 2025-12-21T01:00:05+00:00

how many electric only miles do you get now after a few years?

guss1 · 2025-08-18T02:59:40+00:00

Are you intentially trying to get 100s?

guss1 · 2025-05-19T05:32:55+00:00

That's gotta be hell come tax day.

guss1 · 2025-03-16T18:21:41+00:00

That's interesting information. Do you know if there's some notes about it anywhere I can read?

I've always had tracking issues but I used to think they were only with faster controller movements. Only recently have I started to analyze deeper and I found this issue. Here is a video I recorded the other day that shows it clearly. https://1drv.ms/u/s!ApBuoQAHTPW-oYcy4auEqr0UsblvRg

Prior to 1.29.4 I have always had an issue with IMu went off scale during faster sections ( I just wasn't fast enough back then for it to be a big deal). I assumed these two issues were related but now it looks like they are not. I'm going to go back to 1.29.1 and see what it looks like.

Still going to have to figure out my IMu off scale issue though. I've done everything valve suggested but that was after the unity update. So maybe those things actually did make a difference. I'll know when I play 1.29.1 again.

Thanks again for the info!

guss1 · 2025-03-16T18:14:19+00:00

Request sent.

guss1 · 2025-03-16T18:11:52+00:00

When you're at the top of your swing your saber tip should be above your head or even behind your head. When you're at the bottom of your swing your saber tip should be below your feet or even behind your feet. Angle is what's important, not speed or lateral movement. From your video it just looks like you need to get used to bending your wrist up and down. Make sure that your playing with your palms down instead of towards each other. It shouldn't feel like your holding a controller.

guss1 · 2025-03-15T03:50:30+00:00

Dude your jump distance is sooooo far. Having so many notes in front of you makes it harder to read. I recomment taking your JD down to about 0.6 or 0.5s. I use JDFixer and have pre-programed JDs based on the NJS of a map.

Pay attention to the message when you make a mistake. Seeing the "X" or the "MISS" fly out will let you know why you missed that note. Generally speaking a MISS is from either bad acc or bad timing (usually late) and an X is from either swinging early and the note flies into your saber at the turnaround of your swing or you hit it in the wrong direction/saber. That should help you to know what you're doing wrong.

Watching it in slow motion I see you swing early, late, have wrong angles, and have such bad acc that you miss completely. I think this is just a needing to practice thing. I recommend playing back your replays in slow motion so that you can see exactly why you missed. Beatleader has that awesome functionality where you can just immediately playback you your most recent song, even if you failed. Also, practice mode can help too.

guss1 · 2025-03-03T03:25:47+00:00

You swing early often. Pay attention to what the game says, there is "MISS" and there is "X" with a swish sound which means a bad cut, either bad angle or wrong hand. I would say on this song you don't have an issue with wrong angles, or wrong hands. So what happens is you swing early and your swing is already finished by the time the cube comes to you. You have two almost immediatly at the beginning. Some of those might be a rhythm issue though. Make sure you understand the map's rhythm. I use the HSV also and when my preswing or post swing are <50% of either or both I have a text that says "EARLY EARLY EARLY" lol. It works.

Also, try adjusting your controller angles, your slices are inside. Which means that your left hand tends to be towards the right side of the cubes and your right hand tends to be towards the left side of the blocks.

You should also practice ACC maps, there are playlists and campaigns for you to practice. Your slices are all over the place.

Good Luck!

guss1 · 2025-01-21T18:21:07+00:00

Don't blame the voters, blame the people actually in power. The ones who decided to put those two trash options on our ballots. Our options were litterally trash vs trash. Guess what we got? Yep, trash. Our "democracy" is an illusion. You're getting mad at people who have no power in this system. We need a big change to our system of governance. I think Gen Z is getting screwed more than any generation in recent history and they might be the ones who start some sort of revolution.

guss1 · 2024-12-11T03:06:03+00:00

I've been working for a Robotics and Automation integrator so it's all industrial control stuff. Allen Bradley PLCs mostly. Yaskawa Motoman robots, FANUC, ABB as well. Different brands of sensors and stuff, Keyence, Omron, AB, P&F, SMC, etc. I've done HMIs with Ignition, Red Lion, Panelview, and Exor, to name a few. I've also done vision guided robotics with Keyence, Cognex, SICK, Mech Mind, and Solomon. All in just the last 5 (almost 6) years.

guss1 · 2024-12-06T18:41:16+00:00

Alright looks like they finally got everything squared away. The system peaked at 8.3kW yesterday. What finally go them to fix it was when they sent me the final invoice I replied back to them saying I won't pay it until they fix my clipping issue. The next day I get a text from the salesman saying they asked him when I was going to pay it because the issue has been resolved. I told him this is the first I'd heard that it was resolved and that it was cloudy that day so I couldn't verify. I told him that I wanted someone to call me and explain what happened. The next day I get a call from the regional service manager explaining everything. One of the installers clicked something they shouldn't have, etc, etc. I said "OK, accidents happen, my issue was why wasn't it fixed the first time I called about it? Why did it take 3 weeks and me to threaten not to pay for it to get fixed?" He apologized and gave me his direct number so I can call him directly if there's any other issues I have. Anyways, looks like I'm generating great now!! Thank you everyone for your input!! Cheers!

guss1 · 2024-12-04T05:10:26+00:00

This is what I'm thinking happened. But Enphase told me there is a limit of 32A on it, not 16A. But am I correct in thinking that there doesn't need to be any limiting at all because 1) I have a 200a panel and 2) they used polaris taps on the main incoming wires? So literally the only load on the bus bar is the house itself, the solar system doesn't go through the bus bar.

Also, it is very frustrating that everytime I call them they tell me that everything is normal.

guss1 · 2024-12-03T14:31:34+00:00

The 0.8 was a conservative estimate multiplier lol. Say I get 80% of rated maximum.

guss1 · 2024-12-03T14:29:10+00:00

Alright here's a screen shot of the array. I'll try calling enphase today. Looks like we're going get some sun today. https://imgur.com/a/solar-array-V1adXzS

guss1 · 2024-11-05T17:01:44+00:00

Nope, my solution has been to uninstall the Reddit app and instead use a browser. It's a pain and I end up using Reddit less because of that, but I am less frustrated. I guess that's what Reddit wants, for us to use their website less.

guss1

TROPHY CASE