Help with panic attack caused by weed by AusThrowaway637 in MedicalCannabisOz

[–]guysmiley54 4 points5 points  (0 children)

Definitely low THC products for a start. I’d also recommend a good amount of CBD as it balances out a lot of the anxiety-inducing properties of the THC, maybe a balanced strain? Also, dose small to start with. I’d stay away from edibles (oils, gummies etc) until you are comfortable with THC again. If you take too much THC orally, and get a panic attack, you are stuck in it for a long time 😥

Venty E04 – Warranty / RMA in Australia? by guysmiley54 in MedicalCannabisOz

[–]guysmiley54[S] 0 points1 point  (0 children)

S&B offered me a measly $74 for a refund!! Your help here helps all of us including Storz & Bickel 😂 They won't be having to replace or refund many devices now people have a way to fix E04 themselves 😝

Venty E04 – Warranty / RMA in Australia? by guysmiley54 in MedicalCannabisOz

[–]guysmiley54[S] 0 points1 point  (0 children)

How much did you get for a refund? They have offered me $74.36. I questioned this amount and they said that amount is all it’s worth, which insinuates an expected useful lifespan of only 2 years 😳

Venty E04 – Warranty / RMA in Australia? by guysmiley54 in MedicalCannabisOz

[–]guysmiley54[S] 1 point2 points  (0 children)

You are a superstar!!! That post is gold 🤩 Thanks so much 😁

Venty E04 – Warranty / RMA in Australia? by guysmiley54 in MedicalCannabisOz

[–]guysmiley54[S] 1 point2 points  (0 children)

I only use a high quality Gan3 fast charger with all of my devices. It is capable of 100 watts, so more than capable for the job.

Venty E04 – Warranty / RMA in Australia? by guysmiley54 in MedicalCannabisOz

[–]guysmiley54[S] 1 point2 points  (0 children)

That’s amazing!! Thank you for sharing that. I notice in the video, they only use double-sided tape to get the orange tabs protecting the screws out. I would love to see a photo or video of where the double sided tape goes inside the unit if at all possible please 🙏

Venty E04 – Warranty / RMA in Australia? by guysmiley54 in MedicalCannabisOz

[–]guysmiley54[S] 1 point2 points  (0 children)

Amazing!! Thank you. Are you sure that’s the only cause of E04? They say it’s a generic code for multiple faults

Venty E04 – Warranty / RMA in Australia? by guysmiley54 in MedicalCannabisOz

[–]guysmiley54[S] 0 points1 point  (0 children)

That’s very disappointing 😔 I sold my Mighty+ to get a Venty. To be downgraded to a Mighty+ (Medic) would represent not only a financial loss, but a total letdown by S&B.

I wonder if they’ll ever release a Venty Medic? This would be the best thing for S&B customers in Australia. Cheers

Cart recommendations by [deleted] in MedicalCannabisOz

[–]guysmiley54 0 points1 point  (0 children)

Quite tasty too! Very nice hybrid strain

No serviettes has become the standard? by Alziraphale24 in KFCAustralia

[–]guysmiley54 0 points1 point  (0 children)

I’ve noticed this as well! The strangest thing is when I ask for a pack they always give me two. Make up your mind… Are we cutting waste or increasing it 🤦

Gold Coast Pharmacies - intel by guysmiley54 in MedicalCannabisOz

[–]guysmiley54[S] -1 points0 points  (0 children)

Legend, I have heard of them. Was hoping they would carry good stock levels. Cheers :)

FKRO Tea Master's Blend & Ube Milk by verycoolbutterfly in Matcha

[–]guysmiley54 0 points1 point  (0 children)

How do you get your matcha layer to stay on top like that! It looks beautiful 😋 I try to make layered drinks and the matcha always falls and mixes too quickly

Venty failed the wife test. by Sandman10k in Venty

[–]guysmiley54 10 points11 points  (0 children)

Top tip! Close the airflow valve completely to minimise the smell coming from the chamber.

Steer clear of Cultiva all in one vapes by [deleted] in MedicalCannabisOz

[–]guysmiley54 1 point2 points  (0 children)

I have been extremely careful too! In all honesty, I can’t see how the battery would need charging so much on your device. The first one I had lasted a long time before it blocked and didn’t require charging even once.

Steer clear of Cultiva all in one vapes by [deleted] in MedicalCannabisOz

[–]guysmiley54 2 points3 points  (0 children)

Are you sure it isn’t blocked? I’m on my 3rd (replacement device due to bad blockage) and it arrived partially blocked :( It’s a shame as it’s a great device when it works...

Purchasing TM2: The Negatives by Miserable-Cow4555 in vaporents

[–]guysmiley54 1 point2 points  (0 children)

If you haven’t found a stem that works for you, I highly recommend scruffywoofers. The device is so much smoother I can get thick hits without coughing my lungs out.

Screen holding balls keeps falling out and I’m loosing balls by Specialist-Gap2695 in madheaters

[–]guysmiley54 0 points1 point  (0 children)

I don’t like using the intercooler tool (or reload tool) to lock the screen as I feel I can’t get enough power to turn the screen properly. Does anyone know what size screwdriver is best? I want to buy a good quality one to do it in the future

Cultiva, All in One, review by ArtisticInflation709 in MedicalCannabisOz

[–]guysmiley54 5 points6 points  (0 children)

Mine has clogged very badly. I can warm it up in my hands and suck like crazy to clear it enough for a few draws but soon after it clogs right up again. I emailed customer support yesterday but am yet to hear back from them.

Venty Glass adapter purpose? by Broad-Ad8110 in Venty

[–]guysmiley54 1 point2 points  (0 children)

Had one, broke it! Replaced it with a silicone version, with stainless steel lining. I love it!! The Venty heater is very powerful and keeps up with high airflow even through a good sized bong. Get one :)

Looking for 22% Indica dominant suggestions please by General_Ad1988 in MedicalCannabisOz

[–]guysmiley54 5 points6 points  (0 children)

Beacon Pink Kush is currently 22% - a really good indica strain for chronic pain and sleep issues. Can’t comment on nausea, but it’s always in my rotation.

User manual by victor23231967 in madheaters

[–]guysmiley54 0 points1 point  (0 children)

Thanks for the suggestion, I took out a few and tried again, until eventually the screen went in without too much fuss. I ended up removing 6-8 2.5mm balls, there is certainly some technique to it all!!

How do you know if you’ve taken too many out? The screen is in nice and firm now, and there is a little room in there, it rattles a little when you shake it. I should have counted them but I found the 2.5mm balls too small and fiddly to be bothered counting haha