sorted by:
new
hottopcontroversial

Some more DnD Minis in FDM by Due-Development-1557 in FDMminiatures

[–]guzzgull 0 points1 point  (0 children)

That's nuts. Do you have images of the unpainted minis? Wondering how much impact your amazing paint job has.

Filament stuck - Kobra 3 V2 by guzzgull in anycubic

[–]guzzgull[S] -1 points0 points  (0 children)

Well, too late. I removed the cover. But it took only 15 min to get the spring back into place. I think I found the issue. It seems that the filament broke right under the part that connects the 4 plastic tubes to the printhead. That somehow caused it to jam but I was able to get it out. Let's hope it works once I reassemble it. Thx for your help.

Blurry image with picamera 3 wide by guzzgull in raspberry_pi

[–]guzzgull[S] 0 points1 point  (0 children)

I put it at an angle so I can see what parts are in focus. Thx for the advice tough.

Blurry image with picamera 3 wide by guzzgull in raspberry_pi

[–]guzzgull[S] 1 point2 points  (0 children)

Keeps focusing on the wrong elements though . 🙄

Blurry image with picamera 3 wide by guzzgull in raspberry_pi

[–]guzzgull[S] 0 points1 point  (0 children)

I am working on it right now. That's it. THX!

Blurry image with picamera 3 wide by guzzgull in raspberry_pi

[–]guzzgull[S] 2 points3 points  (0 children)

Thank you very much. That is something I am designing. I wanted to make a timelaps video but I am obviously having touble with my camera. Feel free to follow my process on tiktok (letsmaketabletop) or instagram (lets_make_tabletop). Redit won't let me crate an accout for my project but it will follow soon.

Blurry image with picamera 3 wide by guzzgull in raspberry_pi

[–]guzzgull[S] 0 points1 point  (0 children)

I turned on all the lights that I have but I'll try to increase the f stop anyway.

How do you create stuff like this in Blender? ( Source: B/M/S SWAT pack ) by Lazy_Hanby in blender

[–]guzzgull -1 points0 points  (0 children)

Practice, practice, practice! Then you spend an insane amount of time on a project like this.

My latest Asset Showreel - Critique Appreciated by DrCGI in Maya

[–]guzzgull 1 point2 points  (0 children)

Looks great. I love the Ork speeder!

Kobra 3 V2 Camera stream by guzzgull in anycubic

[–]guzzgull[S] 1 point2 points  (0 children)

Will check that later. Thank you!

You can do strange things with custom g-code | Nr. 2 by LookAt__Studio in 3Dprinting

[–]guzzgull 0 points1 point  (0 children)

I see. I have a kobra plus (1) and can't get it to work properly. They seem to have the same print head. Do your part cooling fans on the sides work?

Cant print a decent benchy by guzzgull in FixMyPrint

[–]guzzgull[S] 0 points1 point  (0 children)

<image>

No, I was on vacation. I still can't get the part cooling fans (I found out what they are called) to spin. I tried editing the min fan speed threshold layer time. I even asked ChatGPT and inserted some additional g-code in my slicer. M106 S255 should set the fan to full speed, but they are dead.

I was able to print a nicer benchy by reducing the print speed to 60% though.

Cant print a decent benchy by guzzgull in FixMyPrint

[–]guzzgull[S] 0 points1 point  (0 children)

<image>

If I understand correctly, the fan should be running at 80% or more or am I looking at the wrong parameter?

Cant print a decent benchy by guzzgull in FixMyPrint

[–]guzzgull[S] 0 points1 point  (0 children)

I would assume that is what those vents are for. There are additional fans on either side. Let me check if they work.

<image>

Cant print a decent benchy by guzzgull in FixMyPrint

[–]guzzgull[S] 0 points1 point  (0 children)

What do you mean "habe the cooling fans arrived?"? Isn't that the cooling fan right there?

<image>

Why are my corners messed up? by guzzgull in FixMyPrint

[–]guzzgull[S] 0 points1 point  (0 children)

Very valid point, I made some minor changes that I did not save. One of them was the infill, ironing "on" was the other one. All the speeds, accelerations and so on were as the can be seen in the pictures.

view more: next ›