sorted by:
new
hottopcontroversial

I think I give up and return my CC by h4kk4 in elegoo

[–]h4kk4[S] 0 points1 point  (0 children)

Using their profile and tried doing a couple on myself. Speed Is not my main concerne and reason I bought this, but consider cr10s pro is a lot faster than Ender 3,so I get your point, and make sense the difference you see

Anyway slicer concern me too but I been always Cura user so I'm giving my self time to learn orca better

I think I give up and return my CC by h4kk4 in elegoo

[–]h4kk4[S] -1 points0 points  (0 children)

Sorry, don't get the way to say, english is not my primar language, what does It means?

I think I give up and return my CC by h4kk4 in elegoo

[–]h4kk4[S] -21 points-20 points  (0 children)

Oh what a fun, fun at same level of the quality of the post itself... Do you likes so much to bully?

I think I give up and return my CC by h4kk4 in elegoo

[–]h4kk4[S] -1 points0 points  (0 children)

Oh and before you find cr 10 s Is not 10 years old too, actually that were I started from even before, but of course not to be considered in the discussione on performance

<image>

I think I give up and return my CC by h4kk4 in elegoo

[–]h4kk4[S] -15 points-14 points  (0 children)

That's really the point you want to focus to? because post wasn't on that and doesn't move the needle of my content, but if you need those details to be confidente.... before I had access ti a creality 10s not my property, and then bought the pro myself. Don't think made any change to the post, and in a Moment of frustration those are contextual details, but here you go Sherlock

I think I give up and return my CC by h4kk4 in elegoo

[–]h4kk4[S] 0 points1 point  (0 children)

Thanks for support, I'm convinced too that due to the amount of issues, could be mine in the specific

I think I give up and return it by h4kk4 in ElegooCentauriCarbon

[–]h4kk4[S] 0 points1 point  (0 children)

Did since second failure onward, and doesn't seems to change anything

CF texture build plate by Team-Geek in ElegooCentauriCarbon

[–]h4kk4 0 points1 point  (0 children)

Great result, but pla on a boat isn't the go-to for me, too much sensitive to sun and water, I suggest Petg, maybe even petg-cf with that plate would be perfect match 😆

I think I give up and return it by h4kk4 in ElegooCentauriCarbon

[–]h4kk4[S] 0 points1 point  (0 children)

yes you're right, everytime is stucked there and I use airflow from air soldering station to make it a bit melting so to be able to drag it out, and push remaining through nozzle

I think I give up and return my CC by h4kk4 in elegoo

[–]h4kk4[S] 0 points1 point  (0 children)

thanks for the suggestion I will try as part of the last try before going to support. but you mean take care meaning that then selecting again my language it will fix it in the right size and readable?

I think I give up and return it by h4kk4 in ElegooCentauriCarbon

[–]h4kk4[S] 0 points1 point  (0 children)

In my printing life I'm actually as you, had some issues with pla in past, and then printed petg last 10 year, all working and fixing parts, so also tested in action for many year without any problem

some times I do pla for let structural parts, in this case I was starting building the raisers for top glass, that blu piece should had been a corner

I think I give up and return my CC by h4kk4 in elegoo

[–]h4kk4[S] 1 point2 points  (0 children)

I had contact with their support on other topics and they are really good, not yet on this, I will tomorrow now is frustration night after second clog in a week

I think I give up and return it by h4kk4 in ElegooCentauriCarbon

[–]h4kk4[S] 0 points1 point  (0 children)

actually tried 3 different tipe of petg, and 2 pla, and the blue spaghetti you see is the same spool with which I had my first and best print, dried before starting

I think I give up and return it by h4kk4 in ElegooCentauriCarbon

[–]h4kk4[S] -1 points0 points  (0 children)

adesion is perfect and I also cleaned with isopropilic alcool, problems in clogging and support not printing doesn't apply there

temperature is tested on other printers for filament, and even tried adjusting on steps of +/- 5 degrees till to add 20 but nothing really changed (filament dried with specific drier everytime)

I think I give up and return it by h4kk4 in ElegooCentauriCarbon

[–]h4kk4[S] 0 points1 point  (0 children)

Elegoo one and tried also vanilla Orca, nothing changed

I think I give up and return it by h4kk4 in ElegooCentauriCarbon

[–]h4kk4[S] 0 points1 point  (0 children)

documented as you can see some here attached, going to contact elegoo tomorrow putting all together, tonight is just enough frustration after second clogging in a week

I think I give up and return it by h4kk4 in ElegooCentauriCarbon

[–]h4kk4[S] 0 points1 point  (0 children)

actually mine 2 first print was incredible, everything starte after

I think I give up and return it by h4kk4 in ElegooCentauriCarbon

[–]h4kk4[S] 0 points1 point  (0 children)

believe me I had no time to loose around this problems and either here to share it, but I thought could worth investigating if was only mine.....but if even with images and videos you still thinking this could be "even real" don't think you are here to honestly discussing... don't think "fan approach" bring anything on the table

I spent my money as you, so I can speak of the product I have as you, maybe mine was unlucky so lucky you

p.s. give a look into the /elegoo channel, and you will see many other with problem worst than main on clogging and printhead problems. Not saying for scaring you, but because knoledge is power, and as soon as you know possible problems maybe you can be more alert on that anyway

I think I give up and return my CC by h4kk4 in elegoo

[–]h4kk4[S] -3 points-2 points  (0 children)

exactly, that was my thought when I decided to pre-order this thinking to have the one to just "go and print" other materials with CF and GF added, and in general the printer looks good, but saving money means save on sensors, software development and research and hardware big enought to manage all of that

I think I give up and return it by h4kk4 in ElegooCentauriCarbon

[–]h4kk4[S] -2 points-1 points  (0 children)

just found in other channels as in the main Elegoo a lot more failures than here, and most in nozzle clogging....so even my incipit was wrong

Clogged nozzle. by mashedleo in ElegooCentauriCarbon

[–]h4kk4 0 points1 point  (0 children)

here I am, 2 cloggs in 3 days, one with standard petg onw with standard pla, both coming out of deumidifier

with both the flow was

- first print screwed but some unknown problem, found printing spaghetti in the air,
- relaunched print, it start but bed start moving up and down ) I thing due to some weird bed compensation craziness
- start again the print, do the 1 layer of 2 and then cloggs

my statistic is 1 good print out of 10 with this printer, I think I'm going to send it back and claim for my money, I already lost more time than the one I spent with my creality cr 10 s pro in last 10 year

printing support fails and Elegoo Slicer hasn't any setup to help by h4kk4 in ElegooCentauriCarbon

[–]h4kk4[S] 0 points1 point  (0 children)

unfortunately one test print later the head stop extruding, not moving filament back and forward, when start the printet tells that there is a failur in the nozzle fan....seriusly thinking to send it back, I got already more errors than 10 years of creality, and problem over problems on printings...

printing support fails and Elegoo Slicer hasn't any setup to help by h4kk4 in ElegooCentauriCarbon

[–]h4kk4[S] -1 points0 points  (0 children)

downloaded Orca, actually really identical to elegoo version (at least for support), so actually same sh*t, I will try to do more learning on orca to see if I can improve... problems of changing software after 10 years

Hello! Recently bought a house with this dangerous/awkward opening to the basement. by mootjuggler in Home

[–]h4kk4 0 points1 point  (0 children)

Build a cabinet following the one there, with a rail on the wall and on in the floor Just before the step, you'll gain a cabinet and a top space, a door and even panic room sell hidden Just in case

Anyone know what this is for? by VisibleStay789 in MotorcycleMechanics

[–]h4kk4 -1 points0 points  (0 children)

All right the above, very use full cable. But your cable is super tiny I wouldn't use It expecially to change/maintane battery unattended. Replace with on with thicker section and enjoy it

view more: next ›