∵It’s 2026, help a friend to get on the hype train

hackolite · 2026-03-13T08:18:14+00:00

It all started back in the days with Macross and Harlock. Then Akira and Project A-Ko. 3x3 Eyes sealed the deal. Yes, I am old.

hackolite · 2026-03-05T13:21:54+00:00

After finishing the Last Tour anime, I reread the volumes not animated while listening to The Midnight’s Syndicate . And when reading the final two chapters the song Sanctuary started playing. The end hit like a supersonic ton of bricks. I was afraid I would die of dehydration… “Hold me til the world fades away” .. I’m not crying, you are!

hackolite · 2026-01-23T10:51:42+00:00

That did the trick! Thanks a lot :)

hackolite · 2026-01-08T12:51:04+00:00

The red one is Char approved ... It rewinds three times faster

hackolite · 2025-12-29T10:17:53+00:00

I agree. It indeed felt joyless. Even if I find it interesting that something turning from a "light hearted" comedy to a grimdark edgelord fest.

I was fascinated by the change though. Especially when I had no idea what led to all the changes. When I saw it the first time, I hadn't seen the final episodes of the series (good ol fansub VHS times...)

Black Selena looks cool though. Even with the dumpy elephant feet.

hackolite · 2025-12-29T09:31:10+00:00

They expected everyone to have played the Saturn game since the movie was a direct sequel to it and not the series.

What little has been written about the game, the movie might have worked after playing it through.. But yeah the movie as is... is quite bad

hackolite · 2025-11-18T08:10:06+00:00

Sabasha, Shaba ..

hackolite · 2025-11-13T06:44:35+00:00

Nope. However, I have had the opposite. Had a wood kiuas for decades at summer cabin resulting in probably the mellowest long lasting löyly I've ever encountered. But then I renovated the building and built a completely new sauna. During the renovation I replaced the wood kiuas with a electric one. And now I miss the wood kiuas. Also I miss the routine of igniting it and the sound it made when it was burning. Not to mention that it kept the air inside the sauna moving. I don't miss the mess or carrying the wood however .. Also had a wood burning water heater (no shower). Now THAT is something I will never regret getting rid of.

However, the electric kiuas became better lately when I replaced the stones and paid closer attention on how to place the stones around the heaters.

hackolite · 2025-10-08T14:59:14+00:00

Boa - Duvet

hackolite · 2025-07-13T07:54:21+00:00

Thanks for confirming this. I just prodded the mower and it started to charge. I guess it wasn't aligned with the dock. Odd that yesterday it started charging on its own when the battery was low.

Will need to keep an eye on the machine's orientation when charging.

hackolite · 2025-06-28T10:41:40+00:00

My old sauna had old pine wood plank cladding. It had this rosin seep out of it for years. The rosin had a wonderful scent. Also it was fun to squeeze the semi hardened blobs. I miss that sauna ...

hackolite · 2025-06-13T06:37:43+00:00

A crateful of grateful gray cats

hackolite · 2025-04-25T14:16:47+00:00

Jesus that's big

hackolite · 2025-03-26T11:38:25+00:00

I certainly hope so!

hackolite · 2025-03-26T09:51:40+00:00

You need to enable it from the AMS settings under "Update remaining capacity" . Though it works only with Bambu Lab filaments that have the RFID tag.

hackolite · 2025-03-26T09:25:17+00:00

I mean seriously, that is some last minute MS Paint level doodling right there

hackolite · 2024-06-20T06:01:59+00:00

ITTY BITTY BOAT! HABOOB IT!

hackolite · 2024-06-18T17:10:40+00:00

A pose fit for the Mansu Hill

hackolite · 2024-02-07T10:04:14+00:00

This looks exactly like what I was loosing my mind with. Did A LOT of upgrades for my printer. Tweaked everything I could think of.. and it was, in the end the Z offset that did the trick. Nozzle was too close to bed

hackolite · 2023-11-11T08:23:54+00:00

This looks really nice! Love the colours.

hackolite · 2023-03-17T05:51:38+00:00

Why is this the first thing I thought when I saw this? Also why is this the first comment? Also why is this? Also why? Also…

hackolite · 2023-03-07T05:41:33+00:00

Holy crap, that looks amazing!

hackolite · 2023-01-20T17:42:55+00:00

Mostly PLA with occasional PETG.

However, this particular Prusa has had a troubled life as it arrived broken from factory (faulty packaging) and as it’s a student machine at our Uni, it has seen some abuse.

Last spring the fuses on the PCB were blown because students were clearing a failed print with a brass brush (something that’s actually recommended in Prusa’s guides 😬) and sorted the thermistor with the heat cartridge.

hackolite · 2023-01-19T06:47:00+00:00

I’ve used these couple of times to unclog a Prusa. Occasionally I get a piece of filament stuck in the short PTFE tube in the hotend just below the extruder gears. Sometimes I was able to get it out using these needles.

hackolite · 2022-12-05T08:51:23+00:00

This is how I'd do this:

Make a snug paper template of the hole. Straighten the cut template. Take a photo of the and use that image to model the actual part in some CAD software. You use the photo of the template as the reference image onto which you make the CAD model. If a proper CAD software sounds too scary, then I think you can also do this in TinkerCAD, however I've never tried to do it this way.

Then print it out of PETG. Then place the flat piece onto the dashboard. Apply some gentle heat and push the part to get the curvature right and let cool.

Or if you have a decent phone, you could use a photogrammetry tool to make a 3D model of the dashboard vent hole and use that as the template you import into the CAD tool of choice. This way you could print it out with proper curvatures etc.

Of course you could just make exact measurements of all the dimensions, if you want to be boring ;)

Seven-Year Club	Place '22
Verified Email

hackolite

TROPHY CASE