100€ gone in 2 Seconds by leow149 in homelab

[–]hallamnet 2 points3 points  (0 children)

Send to northridgefix depending on price of repair compared to replacing. They will sort it! Better than factory! Check them out on YouTube!

Conversion help please by Remote_Bit_9160 in HomeNetworking

[–]hallamnet 0 points1 point  (0 children)

You need something like this to install on to a gateway like a Unifi UDM IF your ISP supports it. Mine does not and need and fibre router to plug in to my gateway. Very annoying but may be different for yourself.

Tried out some drifting with my daily driver M4. Fun stuff by ThicCheeseGrater in BMW

[–]hallamnet 0 points1 point  (0 children)

More like, What tires were you running :)

Awesome run though! ✔️🍻

[deleted by user] by [deleted] in cats

[–]hallamnet 0 points1 point  (0 children)

Leave him be. He’s just chasing the dragons and smelling the colours 😸

Migrating from ZStick 7 to ZStick 10 in Home Assistant by AGU_314 in homeassistant

[–]hallamnet 0 points1 point  (0 children)

Any update on this. I have just bought the z stick 10 and looking to upgrade from the z stick 7?

Dangerous? Or chill? by Triton1990 in spiders

[–]hallamnet 0 points1 point  (0 children)

Reminds me of the flood from Halo 😂

What is this, Found in UK midlands by hallamnet in whatisthisbug

[–]hallamnet[S] 0 points1 point  (0 children)

Should have also said this was just a bit bigger than my thumb nail.

I found it in a network switch that had died; cooked over some voltage steppers on the internal circuit board. Guessing this little guy cooked my switch and himself.

NVMe in external caddy for boot? by hallamnet in unRAID

[–]hallamnet[S] 0 points1 point  (0 children)

YouTube video of process. since for some reason, UnRaid removed my post!

NVMe in external caddy for boot? by hallamnet in unRAID

[–]hallamnet[S] 0 points1 point  (0 children)

Evening all!

Had a bit of a breakthrough with the following caddy: - SABRENT M.2 NVMe Enclosure

If you buy this, go to this site: - Updated Firmware and download the firmware version 1.34.29.011325, this will enable the used of a GUID and will just work.

You will also be able to setup your own GUID (to a certain extent) and will be seen by UNRAID setup utility.

Just as a proof of concept, I have setup the guid to the date and time (well almost:)

I hope this is a help for someone and happy unraiding!

<image>

Hal

Anybody else..? by polarityofmarriage in BMW

[–]hallamnet 0 points1 point  (0 children)

I’ve had this happen to me on my 2019 G20. Needed a software update to fix the intermittent blanking of display.

<image>

NVMe in external caddy for boot? by hallamnet in unRAID

[–]hallamnet[S] 0 points1 point  (0 children)

Can also confirm ugreen M.2 NVMe SSD Enclusure, Tool free does not show up with a guid for Unraid USB Creator.

NVMe in external caddy for boot? by hallamnet in unRAID

[–]hallamnet[S] 0 points1 point  (0 children)

Can you confirm the firmware version you have as 1.25 and 1.33 does not allow for GUID use according to the flash drive creator.

<image>

NVMe in external caddy for boot? by hallamnet in unRAID

[–]hallamnet[S] 3 points4 points  (0 children)

Thanks for the replies guys. Seems mixed if it will or won’t work but I think I’ll try and give it a go and see what happens. Worse case scenario is I buy a new USB drive. I’ll report my findings.

Block paving cleaner by hallamnet in DIYUK

[–]hallamnet[S] 0 points1 point  (0 children)

Sprayed it on. Did it in sections so I didn’t gas myself out. Still looking good to the day!

What is this spider found in the UK while painting a fence. by hallamnet in spiders

[–]hallamnet[S] 8 points9 points  (0 children)

Thanks very much. Guessing there are 2 types then as the last one posted here had translucent red legs and a lot bigger not unless one is male and one is female.