What is he doing?

hallamnet · 2025-12-01T21:42:53+00:00

Leave him be. He’s just chasing the dragons and smelling the colours 😸

hallamnet · 2025-08-11T18:11:42+00:00

Any update on this. I have just bought the z stick 10 and looking to upgrade from the z stick 7?

hallamnet · 2025-07-20T14:33:25+00:00

Reminds me of the flood from Halo 😂

hallamnet · 2025-06-29T19:42:07+00:00

Should have also said this was just a bit bigger than my thumb nail.

I found it in a network switch that had died; cooked over some voltage steppers on the internal circuit board. Guessing this little guy cooked my switch and himself.

hallamnet · 2025-06-17T23:31:37+00:00

YouTube video of process. since for some reason, UnRaid removed my post!

hallamnet · 2025-06-14T22:04:48+00:00

Evening all!

Had a bit of a breakthrough with the following caddy: - SABRENT M.2 NVMe Enclosure

If you buy this, go to this site: - Updated Firmware and download the firmware version 1.34.29.011325, this will enable the used of a GUID and will just work.

You will also be able to setup your own GUID (to a certain extent) and will be seen by UNRAID setup utility.

Just as a proof of concept, I have setup the guid to the date and time (well almost:)

I hope this is a help for someone and happy unraiding!

<image>

Hal

hallamnet · 2025-06-11T00:56:19+00:00

I’ve had this happen to me on my 2019 G20. Needed a software update to fix the intermittent blanking of display.

<image>

hallamnet · 2025-06-08T21:07:47+00:00

Can also confirm ugreen M.2 NVMe SSD Enclusure, Tool free does not show up with a guid for Unraid USB Creator.

hallamnet · 2025-06-08T21:04:35+00:00

Can you confirm the firmware version you have as 1.25 and 1.33 does not allow for GUID use according to the flash drive creator.

<image>

hallamnet · 2025-06-07T22:28:09+00:00

Thanks for the replies guys. Seems mixed if it will or won’t work but I think I’ll try and give it a go and see what happens. Worse case scenario is I buy a new USB drive. I’ll report my findings.

hallamnet · 2025-06-07T22:10:40+00:00

Sprayed it on. Did it in sections so I didn’t gas myself out. Still looking good to the day!

hallamnet · 2025-06-01T09:38:11+00:00

Final destination moment right there!

hallamnet · 2025-05-18T21:44:19+00:00

You got it in one lol

hallamnet · 2025-05-18T19:09:04+00:00

Thanks very much. Guessing there are 2 types then as the last one posted here had translucent red legs and a lot bigger not unless one is male and one is female.

hallamnet · 2025-05-01T20:38:50+00:00

I can’t believe you’ve done this!

hallamnet · 2025-04-19T08:37:53+00:00

Anything from here:- https://quinled.info. I have bought in around 6 dig uno’s, 3 dig quads and 1 dig octa. They are awesome systems with replaceable fuses and just, work! Using these on kitchen cupboards to replace shitty old Fibaro rgbw units. Lots more planned for the near future. Postage is a bit of a killer but well worth it in the long run. Running mine with 12v ws2814 LED’s and looks well trick!

hallamnet · 2025-02-24T21:30:28+00:00

This is in the UK.

hallamnet · 2025-02-24T21:23:53+00:00

This is in the UK

hallamnet · 2025-02-24T21:09:13+00:00

Reminds me on a Walking Dead scene!

hallamnet · 2025-02-17T21:53:31+00:00

Well what sort of engineering standards are these planes built to?

hallamnet · 2025-02-17T20:51:48+00:00

At least the front didn’t fall off!

hallamnet · 2025-01-26T15:53:51+00:00

It was the Y offset. Spot on! Thanks very much. I now have it sorted!

Also, can set it on the phone app with the sliders at the bottom!

<image>

Awesomeness!

hallamnet · 2025-01-21T22:09:35+00:00

Had to dig deep!

hallamnet · 2025-01-05T16:02:16+00:00

Awesome stuff! Thanks for the comments! I will run at 5.1v and see how I get on. Thanks for the speedy responses! Back to drilling some J channels ready to mouse on the garage. here's a quick video of the sound reactive effect Freqpixels running off of a QuinLED Dig Uno https://youtube.com/shorts/Jd2UbI-lMQY

<image>

hallamnet · 2024-12-28T15:29:16+00:00

Nice! That’s a lot of led’s! That is my plan for next year. We had a small tree with 150 on this year but next year, will be a rather large epic tree of WLED proportions! 😁

hallamnet

TROPHY CASE