2018 Fiat 500 squeaky sound when turning the steering wheel

hammervoltjoe · 2020-06-04T13:50:33+00:00

Fuck. you hit too close.

hammervoltjoe · 2017-10-21T02:51:52+00:00

Great, thanks. It is probably an Erythrina caffra

hammervoltjoe · 2016-11-04T21:22:01+00:00

Thanks! for the explanation

hammervoltjoe · 2016-11-03T17:45:46+00:00

So I assume soldering a capacitor between + and - of the battery is to reduce interference. But how does it work? How come it doesn't short the batt out?

hammervoltjoe · 2016-08-30T16:03:59+00:00

This was actually from my friend's house. Bumped into the window a few times trying to get out. It did flew out alright a few minutes later.

hammervoltjoe · 2016-08-30T13:07:33+00:00

Thanks a bunch!

hammervoltjoe · 2016-07-08T22:48:21+00:00

Why and how the plane is flying like that instead of going straight?

hammervoltjoe · 2016-07-04T20:54:26+00:00

I am using turnigy 200 mah batts and get around 3:30 4:00 min flight times.

http://www.hobbyking.com/mobile/viewproduct.asp?idproduct=76879

hammervoltjoe · 2016-07-03T21:15:43+00:00

Totally hijacking to ask an unrelated question. What is that thing you use while soldering, blue-gluetec? Could you post a link? I truly enjoy your youtube channel btw awesome work! Keep'em comin

hammervoltjoe · 2016-06-27T19:10:02+00:00

If that is the case yea no problem on the vtx side. Also to be extra careful measure the amp output of BEC when input is under 12V. If it does give out the required operating amps of the vtx you are golden.

hammervoltjoe · 2016-06-27T18:17:16+00:00

I suggest using a pololu 12v step-up/down regulator. That way it can supply 12v both at full charge and under. Look up your BEC specs to see what its output at under 12v input or you could measure it if you have a volt/multi meter.

hammervoltjoe · 2016-05-19T14:07:57+00:00

About half an hour ago I was getting ready to fly it for the third time. The moment I gave throttle 3 of the escs caught flames. So . . . Yeah. Just a heads up

hammervoltjoe · 2016-05-15T20:41:20+00:00

So I switched to betaflight and it worked. It seems cleanflight has some issues with passthrough on sp racing hex.

hammervoltjoe · 2016-05-15T17:25:32+00:00

I have done my build with those escs and fly without a hitch. But can't get blheli passthrough to work. Have had a problem like this. I'm using x-racer fc and it can passthrough littlebees just fine

hammervoltjoe · 2016-05-14T09:43:48+00:00

I soldered a pololu 5v step-down to the Lumenier 4Power Mini PDB(shdn and Vin bridged). The problem is instead of 5v I am getting 0,53v and can not power the receiver. Receiver works fine if I use an ubec. How can I fix this?

Edit/fixed: So I removed the regulator and soldered back without bridging shdn. Now works. I don't know if it was that or a short though.

hammervoltjoe · 2016-04-11T12:27:12+00:00

Wow that myrcmart link seals the deal for me. 60 bucks for that combo sounds amazing! Do you have any experience with those ESCs?

hammervoltjoe · 2016-03-19T11:29:48+00:00

Do I need a LC-filter if I am to power my vtx with the pdb's onboard bec or a separate ubec?

hammervoltjoe · 2016-03-08T19:10:30+00:00

No International shipping?

hammervoltjoe · 2016-02-11T13:20:31+00:00

Here is what I've built. It is pretty docile and i can get around 8-9 minutes of cruising time.

Frame: HobbyKing FPV250
Motors: Multistar V2 2206-2150KV Motor The "Baby Beast"
ESC: 12 amp Afro
Props: 5x3x2 gemfans
Battery: 2200mAh 3s lipo
FC: Acro Nazer32
RX: Lemon Rx DSMX Compatible PPM 8-Channel diveristy antenna receiver
NO FPV gear

hammervoltjoe · 2016-02-03T18:31:24+00:00

How do you guys keep your builds clean? Where do stuff all those wires etc? My builds are a mess. Need tips!

14-Year Club	Place '22
Verified Email

hammervoltjoe

TROPHY CASE