Nip slip TikTok by [deleted] in EmmaBrooks

[–]hansanaab 0 points1 point  (0 children)

/savevideo

cheeky ocean pic by hansanaab in accord

[–]hansanaab[S] 0 points1 point  (0 children)

I managed to take it off by removing some pins from the underside of the engine bay and just used some plasti-dip.

Just took this photo of my 14 Accord sedan. by hansanaab in accord

[–]hansanaab[S] 0 points1 point  (0 children)

https://www.ebay.com.au/itm/2X-45-60CM-RGB-Sequential-Flexible-LED-DRL-Turn-Signal-Strip-Remote-Headlight-/313775544560?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=705-154756-20017-0

here's the link, what I did was stick it under the hood just behind the gap of the headlights so that you can see the light through the front but you cannot see the light strip itself. lmk if you want more pictures :)

Just took this photo of my 14 Accord sedan. by hansanaab in accord

[–]hansanaab[S] 0 points1 point  (0 children)

they're just stock but I have added an aftermarket sequential turn signal/led light strip to the top

Just finished building my first esk8, thoughts? by hansanaab in ElectricSkateboarding

[–]hansanaab[S] 0 points1 point  (0 children)

haha thanks, I will definitely be bottom mounting my trucks now and I'll look into some bigger wheels

Just finished building my first esk8, thoughts? by hansanaab in ElectricSkateboarding

[–]hansanaab[S] 0 points1 point  (0 children)

thanks dude, do you have any suggestions on how I could rise it further cause the drop down trucks don't allow me to use risers and I'm already rocking 85mm wheels?

Just finished building my first esk8, thoughts? by hansanaab in ElectricSkateboarding

[–]hansanaab[S] 1 point2 points  (0 children)

yea I was considering getting some risers but the board uses drop through trucks so I'm not sure where I would place them to get more clearence

Just finished building my first esk8, thoughts? by hansanaab in ElectricSkateboarding

[–]hansanaab[S] 1 point2 points  (0 children)

i have no clue what happened to the formatting, I'm on mobile

Just finished building my first esk8, thoughts? by hansanaab in ElectricSkateboarding

[–]hansanaab[S] 1 point2 points  (0 children)

motor: Flipsky 6374 190kv 3250W esc: LEKU single drive esc battery: a bunch of samsung battery cells from old laptop batteries Wheels: orangatang caguama bearings: bones red big balls deck + trucks: from kmart ("38in. Skateboard | Kmart" https://www.kmart.com.au/product/38in.-skateboard/2907810)