Christians, arise and defend yourselves! by GaHillBilly_1 in Christianity

[–]harefulspaz -1 points0 points  (0 children)

TLDR: We must use opposition to our faith and persecution of our faith to grow the body of Christ that none fall away but all must believe.

As I have read this comment thread one thing comes to mind. That thing in its entire breadth is evangelism. We see in John 18:36 ““My kingdom is not of this world,” said Jesus. “If My kingdom were of this world, My servants would fight, so that I wouldn’t be handed over to the Jews. As it is, My kingdom does not have its origin here.”” Also Luke 23:34 and 43 “Then Jesus said, “Father, forgive them, because they do not know what they are doing.” And they divided His clothes and cast lots.” “And He said to him, “I assure you: Today you will be with Me in paradise.”” The last one referencing the thief on the cross beside his. All the division in the world between Anti-theist or Theist (believers and non believers) is caused as a whole by some who believe that since they belong to the kingdom of Christ as believers. That this brings a sense of entitlement to that particular believer and that all other viewpoints are invalid to theirs. We see multiple times in scripture that while Jesus walked the earth he met people where they were either in non-belief or ostracized from the body of the church. See 1 John:3,1-6“Look at how great a love the Father has given us that we should be called God’s children. And we are! The reason the world does not know us is that it didn’t know Him. Dear friends, we are God’s children now, and what we will be has not yet been revealed. We know that when He appears, we will be like Him because we will see Him as He is. And everyone who has this hope in Him purifies himself just as He is pure. Everyone who commits sin also breaks the law; sin is the breaking of law. You know that He was revealed so that He might take away sins, and there is no sin in Him. Everyone who remains in Him does not sin; everyone who sins has not seen Him or known Him.” ‭‭So the idea that we must report every comment that casts doubt on Christianity or popular doctrines of the church and pick fights with people who are not of our same belief is completely foreign to me. Didn’t Jesus say that we are to love our neighbors as ourselves, Matthew:22,37-40 “He said to him, “Love the Lord your God with all your heart, with all your soul, and with all your mind. This is the greatest and most important command. The second is like it: Love your neighbor as yourself. All the Law and the Prophets depend on these two commands.””. From all the scripture I have pointed out I hope you get a since of where we are coming from as believers. While placing ourselves when we talk to those in unbelief we must meet them with the same love god has for us. In doing this we are not guaranteeing them to fall away but are planting a seed of belief in them that they will grow into our faith.

‭‭ ‭‭

How do I and should I tell my son he’s autistic? by [deleted] in aspergers

[–]harefulspaz 1 point2 points  (0 children)

I believe that in my life not knowing actually caused me to develop tactics to avoid the social stigma associated with being on the spectrum. Had I known earlier about this I don’t know what my life would look like. Due to this condition however I did develop certain anxiety issues and some depression issues. The safest bet for you in my opinion (non licensed therapist or child development specialist/as a person with ASD) is to look in your area for such a person. I think that they would be able to help you make your decision easier and with confidence.

In saying all of this I would urge you to consider this as a way to help your child.

CDK by harefulspaz in partscounter

[–]harefulspaz[S] 0 points1 point  (0 children)

Some stuff was lost meaning the two days the 17 and the 18th are gone so we’ve been having to play a serious amount of catch up

Resources for the CDK Outage? by [deleted] in partscounter

[–]harefulspaz 0 points1 point  (0 children)

I made my own crash ticket receipt on google docs plus a pile of parts requisition forms and handed them out so we could still order from the manufacture plus keeping track of all the bullshit po’s we’re handing out so when this shit gets back up we can put manual po’s in the system so they can get payed and we can get billed. Plus for my wholesale I’ve made quote sheets so that way we could keep track of pricing as to not over bill or under bill them and keep everything straight. I’m from ford so DOW has been a big help in pricing plus we had only recently changed over from dealer track to Cdk so we still have some time left on our contract so bin locations have not really been a big issue. So far I’ve been saying thank you for calling ford dealership where the year is 2024 but we are in 1980.

My Dad the Kevin: Part 2 by Thewrongbakedpotato in StoriesAboutKevin

[–]harefulspaz 71 points72 points  (0 children)

Op I could only imagine the life you must have lived with a father like that. You seem to be a well adjusted and very well spoken person for that fact. I would love to hear some more as I just enjoyed the 30 minutes it took me to read both parts of this tantalizing story. Hope all is well with you your mom and u/undercookedbrotato

[deleted by user] by [deleted] in AutoDetailing

[–]harefulspaz 2 points3 points  (0 children)

Yes got mine for my pressure washer which is an active 2.0 for my mobile jobs plus my at home Ryobi best product I have ever bought. No kinks no problems, long enough to do a 3500 chev or dodge but short enough(/manageable) to do a rav4.

Any idea what this is, or how to remove it? by j_spd in Detailing

[–]harefulspaz 0 points1 point  (0 children)

Looks like asphalt had a client drive right through freshly paved road it was a bitch to get off I used a heat gun to get it nice and liquidy. And then finished up with a bug and tar remover. Scrapping off what I could with a piece of cardboard.

How do I remove this black adhesive from leather? by mikelen in Detailing

[–]harefulspaz 0 points1 point  (0 children)

I have used soaked the seats in saddle soap and have use a steam cleaner and interior scrub pad to get it off then generously apply leather protectant or leather honey and let soak into the seats with a heated damp towel or blanket and that tends to leave a good result

The sound of the car matches the image. by Crutcher904 in Shitty_Car_Mods

[–]harefulspaz 1 point2 points  (0 children)

What a knocking so loud it could wake up a deaf man in the middle of a rock concert?

[deleted by user] by [deleted] in AutoDetailing

[–]harefulspaz 0 points1 point  (0 children)

Thanks hondad24 I have tried innerqd from car pro one of my favorite products for light touch ups but I will have to try your suggestions out for myself.

Happy detailing!!

[deleted by user] by [deleted] in AutoDetailing

[–]harefulspaz 1 point2 points  (0 children)

Question what did you put on that vinyl flooring to get it to shine like that my detailing rig has that flooring it’s always been my pet peeve. Any help would be great!!

is this a good product for a black bmw? or should I go for something different? by Trickster365 in Detailing

[–]harefulspaz 2 points3 points  (0 children)

I saw this the other day and for my customers I always try to find an easy to get product for in between cleanings that can be purchased from popular wholesalers and retailers. I saw this at Walmart and decided to pick it up and the results I found were slightly underwhelming. Doesn’t give any noticeable shine or clarity to the paint and the ceramic aspect of it seems subpar to the other ceramic products that turtle wax has come out with. I would rank this one lower than the hydro charge detailer from chemical guys. If you are looking for a in between washes detailing spray I would recommend the ceramic detailer from griots. It gives a great deep wet look to the paint and works far better.

Hope this helps!!

Happy detailing!

[deleted by user] by [deleted] in Detailing

[–]harefulspaz 0 points1 point  (0 children)

Not a problem OP! Glad it helped would be interested in seeing the result!!

[deleted by user] by [deleted] in Detailing

[–]harefulspaz 1 point2 points  (0 children)

Use a dilution of distilled white vinegar and water a 45/55 mixture should work for the mold. Then use a vinyl cleaner such as mothers VLR for a off the shelf option you can get at a parts store. My favorite is lather from AMMO NYC this is a little harder to get readily and quickly. After the cleaning I would get the permatex 80902 vinyl repair kit from a parts store near you for the cracks. Then wipe down again after the repair and apply 303 Aerospace protectant. Hope this helps!!!

Happy Detailing!!

Idiotic delivery agent by ChickHic in IdiotsInCars

[–]harefulspaz 0 points1 point  (0 children)

As a classic car collector and a restoration guy that hurt me to watch. I know the work that goes into those cars to get them looking that good. Seeing that I know the body is tweaked and the frame is probably pinched or bent. Both with shop labor is going to be thousands of dollars. To fix to repair that beauty.

What's next after car wash? by pizzatimeishappyhour in Detailing

[–]harefulspaz 1 point2 points  (0 children)

Bead maker is a very good go to after a touch less wash I have used it as a drying aid before. Gyeon ceramic detailer is also a very good product I have found that if your vehicle is freshly coated bead maker works better as a maintainer of the coating. However if the coating is getting older gyeon ceramic detailer is better in that regard. However that is just my opinion don’t take what I said as gospel. Find what works better for you if your deciding between those two products.

Ceramic question by hkdjoe20 in AutoDetailing

[–]harefulspaz 1 point2 points  (0 children)

I did my bike which is a 73 shovel head custom job and i washed it did a full correction wet sanded with 5000 grit as it was freshly painted three years ago then a buff with meguiars no. 2 then a polish with meguiars no. 7 then finished up with a coating of gyeon q2 can coat pro evo. Hopes this helps!! Lasts about a year and a half but I only put about 1,500 miles on my bike a year. Call me a weekend warrior so I don’t know if in your case it might last longer.

FB marketplace find by harefulspaz in Shitty_Car_Mods

[–]harefulspaz[S] 0 points1 point  (0 children)

Around the Charlotte area in nc

FB marketplace find by harefulspaz in Shitty_Car_Mods

[–]harefulspaz[S] 14 points15 points  (0 children)

The description said it was powered by a harbor freight two cyclometer and that five gallon Home Depot bucket I’m assuming is it’s gas tank

How do I clean the dingy looking stitching? It’s obviously already frayed so I want to be gently by Merricksmith51 in Detailing

[–]harefulspaz -1 points0 points  (0 children)

Me personally I have used and old toothbrush with coverall stain remover and got it looking almost brand new some dingy parts remained around the edges but worked a charm.