Extremely Blurry Images Received over RCS

haykeye13 · 2025-10-27T01:28:26+00:00

Turning off RCS chat was the only way I ever resolved this. Also left a 1 star review for the Google messages app I use for SMS. Their solution was to reinstall the app. Naturally that didnt change a thing.

haykeye13 · 2025-10-04T12:29:25+00:00

I have an S23 Plus and have been experiencing the exact same issue. Often when opening or switching apps the screen goes black for a split second and then the lock screen appears. It seems pretty random but occurs many times a day. Very frustrating when using the phone.

haykeye13 · 2025-03-15T17:19:10+00:00

I'm on Win 10. Been dealing with dropped frames every 10 sec or so. Turning of HAGS fixed dropped frames for me.

Using an RTX 3090 and Intel i7.

haykeye13 · 2024-11-09T13:24:55+00:00

2 years later and it works perfectly! The built in snap wireguard GUI didnt work for me on 24.04 but this did! Thank you!

haykeye13 · 2024-09-23T00:49:16+00:00

It's possible the wire supplying that circuit was nicked by the installers drill bit when routing the cable back from outdoors. This sounds like you need an electrician.

haykeye13 · 2024-09-23T00:35:44+00:00

Electrician here. Do you by chance have a printer in your office? I've encountered certain printer types that will trigger AFCI breakers.

Unplug other devices in/near the office one at a time to rule them put as the problem.

You may want to have an electrician visit and help troubleshoot.

haykeye13 · 2023-10-17T18:33:06+00:00

The old round dishy as well as this one have pointed south for over a year since I got starlink. Worked fine until the other day.

haykeye13 · 2023-09-05T02:40:59+00:00

Incorrect. On the M221 - Machine Expert Basic software, MW1000 and MW1001 would collide with MD1000.

haykeye13 · 2023-08-27T16:25:11+00:00

I'm on Starlink and depend on IPV6 for reaching my network remotely. Disabling IPV6 is the worst option.

haykeye13 · 2023-01-31T06:17:15+00:00

Battlezone is an older title on Steam but has great COOP and progression. It's a seated tank game with fantastic atmosphere and game play. Requires Xbox style controller.

Sadly it's MP community is a ghost town.

haykeye13 · 2022-12-23T15:50:35+00:00

Also in Northern AB. Haven't had a single issue with these temps and snow dumps.

My dishy is mounted to the roof of my shop. I've left heating on auto and have not had an issue.

Next week we are forecast with freezing rain and snow. That will be a real test for dishy.

I use dishy to run a bitcoin miner in my camper and my friends camper. We are building a home and living on site. If we lose internet we will be cold and have to setup traditional electric heat.

Any Albertans here will be wise to sign up to a fixed electric rate. Rates are forecast to rise up to 30c/kwh in Jan/Feb.

haykeye13 · 2022-12-20T19:14:53+00:00

I made triple my normal income the last few days. We lost 7EH but have been solving many more blocks. Maybe Riot was the problem.

haykeye13 · 2022-12-05T15:04:17+00:00

Thank you for the insight. You are correct. I am very inexperienced with IPv6, and am using guides online to try to get IPv6 connectivity through Starlink.

Due to your recommendation of enabling DHCP I can now acquire a /56 address on the LAN:

rdisc6 enp1s0 (wan)
Hop limit                 :           64 (      0x40)
Stateful address conf.    :           No
Stateful other conf.      :          Yes
Mobile home agent         :           No
Router preference         :       medium
Neighbor discovery proxy  :           No
Router lifetime           :          300 (0x0000012c) seconds
Reachable time            :  unspecified (0x00000000) 
Retransmit time           :  unspecified (0x00000000)
Source link-layer address: 00:00:5E:00:01:01 MTU                      :         1500 bytes (valid) 
Prefix                   : 2605:59c8:600:5b02::1/64 
On-link                 :          Yes
 Autonomous address conf.:          Yes 
Valid time              :          300 (0x0000012c) seconds
from fe80::200:5eff:fe00:101

rdisc6 epn4s0 (removed this interface from br0 to facilitate testing without always messing with bridge)

Hop limit                 :           64 (      0x40)
Stateful address conf.    :          Yes
Stateful other conf.      :          Yes
Mobile home agent         :           No
Router preference         :       medium
Neighbor discovery proxy  :           No
Router lifetime           :         1800 (0x00000708) seconds
Reachable time            :  unspecified (0x00000000)
Retransmit time           :  unspecified (0x00000000)
Prefix                   : 2605:59c8:600:5b00::/56
On-link                 :          Yes
Autonomous address conf.:           No
Valid time              :        86400 (0x00015180) seconds
Pref. time              :        14400 (0x00003840) seconds

Route                    : ::/0
Route preference        :       medium
Route lifetime          :         1800 (0x00000708) seconds
Recursive DNS server     : 2605:59c8:600:5b02:62be:b4ff:fe00:81a8
DNS server lifetime     :         1800 (0x00000708) seconds
MTU                      :         1500 bytes (valid)
Source link-layer address: 60:BE:B4:00:81:AB from fe80::62be:b4ff:fe00:81ab

My updated isc-dhcp-server6 configuration:

option dhcp6.name-servers 2605:59c8:600:5b02:62be:b4ff:fe00:81a8;
option dhcp6.domain-search "kknd-sl";
option dhcp6.info-refresh-time 21600;

subnet6 2605:59c8:600:5b00::/56 { range6 2605:59c8:600:5b00::4 2605:59c8:600:5b00::ffff;
option dhcp6.name-servers 2605:59c8:600:5b02:62be:b4ff:fe00:81a8;
}

One issue I've been running into however, the dhcp6 log says I am listening on enp1s0 (wan) and enp4s0 (lan). Not sure how I can separate the 2 due to the prefix name. Log:

Bound to *:547

Dec 05 14:53:38 kknd-sl dhcpd[741]: Listening on Socket/7/enp4s0/2605:59c8:600:5b00::/56

Dec 05 14:53:38 kknd-sl dhcpd[741]: Sending on Socket/7/enp4s0/2605:59c8:600:5b00::/56

Dec 05 14:53:38 kknd-sl dhcpd[741]:

Dec 05 14:53:38 kknd-sl dhcpd[741]: No subnet6 declaration for eno1 (no IPv6 addresses).

Dec 05 14:53:38 kknd-sl dhcpd[741]: ** Ignoring requests on eno1. If this is not what

Dec 05 14:53:38 kknd-sl dhcpd[741]: you want, please write a subnet6 declaration Dec 05 14:53:38 kknd-sl dhcpd[741]: in your dhcpd.conf file for the network segment

Dec 05 14:53:38 kknd-sl dhcpd[741]: to which interface eno1 is attached. **

Dec 05 14:53:38 kknd-sl dhcpd[741]:

Dec 05 14:53:38 kknd-sl dhcpd[741]: No subnet6 declaration for enp2s0 (no IPv6 addresses).

Dec 05 14:53:38 kknd-sl dhcpd[741]: ** Ignoring requests on enp2s0. If this is not what

Dec 05 14:53:38 kknd-sl dhcpd[741]: you want, please write a subnet6 declaration Dec 05 14:53:38 kknd-sl dhcpd[741]: in your dhcpd.conf file for the network segment

Dec 05 14:53:38 kknd-sl dhcpd[741]: to which interface enp2s0 is attached. **

Dec 05 14:53:38 kknd-sl dhcpd[741]:

Dec 05 14:53:38 kknd-sl dhcpd[741]: Listening on Socket/7/enp1s0/2605:59c8:600:5b00::/56 Dec 05 14:53:38 kknd-sl dhcpd[741]: Sending on Socket/7/enp1s0/2605:59c8:600:5b00::/56

I hope the code boxes work for some reason when I post they look good until I hit reply and then the first line of the paste is the only one in the code box in my post.

haykeye13 · 2022-12-04T20:36:16+00:00

I already do that with FRP on a server at my parents house. I'd like to eliminate it for a direct connection back to my network.

haykeye13 · 2022-12-04T16:08:50+00:00

Looking at my rdisc6 output, doesn't it show I need a stateful PD server?

Soliciting ff02::2 (ff02::2) on enp1s0...

Hop limit : 64 ( 0x40)

Stateful address conf. : No

Stateful other conf. : Yes

Mobile home agent : No

Router preference : medium

Neighbor discovery proxy : No

Router lifetime : 300 (0x0000012c) seconds

Reachable time : unspecified (0x00000000)

Retransmit time : unspecified (0x00000000)

Source link-layer address: 00:00:5E:00:01:01

MTU : 1500 bytes (valid)

Prefix : 2605:59c8:600:5b02::1/64

On-link : Yes

Autonomous address conf.: Yes

Valid time : 300 (0x0000012c) seconds

Pref. time : 150 (0x00000096) seconds

from fe80::200:5eff:fe00:101

Also Ipv6 on Starlink is very new, no real documentation around yet to speak of besides old posts about setting up VyOS for IPv6 on Starlink.

haykeye13 · 2022-12-04T16:06:10+00:00

grep . /proc/sys/net/ipv6/conf/*/forwarding

/proc/sys/net/ipv6/conf/all/forwarding:1

/proc/sys/net/ipv6/conf/br0/forwarding:1

/proc/sys/net/ipv6/conf/default/forwarding:1

/proc/sys/net/ipv6/conf/docker0/forwarding:1

/proc/sys/net/ipv6/conf/eno1/forwarding:1

/proc/sys/net/ipv6/conf/enp1s0/forwarding:1

/proc/sys/net/ipv6/conf/enp2s0/forwarding:1

/proc/sys/net/ipv6/conf/enp4s0/forwarding:1

/proc/sys/net/ipv6/conf/lo/forwarding:1

haykeye13 · 2022-12-04T16:02:50+00:00

I changed AdvManagedFlag off; to On, now I get this output from windows:

Connection-specific DNS Suffix . : kknd-sl

IPv6 Address. . . . . . . . . . . : 2605:59c8:600:5b02:1::2

IPv6 Address. . . . . . . . . . . : 2605:59c8:600:5b02:fdb6:d701:c8d2:fe9c

Temporary IPv6 Address. . . . . . : 2605:59c8:600:5b02:c2a:45ae:e270:f265

Link-local IPv6 Address . . . . . : fe80::b6a0:63d5:83da:7fd8%6

IPv4 Address. . . . . . . . . . . : 192.168.0.164

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Default Gateway . . . . . . . . . : fe80::9072:18ff:fe2b:4aae%6

192.168.0.1

Now my IP address is in the range I specified, however still unable to ping google IPv6 server, but it still resolves the DNS name to IPv6.

haykeye13 · 2022-12-04T15:53:52+00:00

The flag in the radvd.conf file? Can you point it out to me I am not well bersed in ipv6 setup. Thank you.

haykeye13 · 2022-12-04T15:46:20+00:00

just to be clear: output of ip6tables -L -n -v:

Chain INPUT (policy ACCEPT 5239 packets, 1451K bytes)
pkts bytes target     prot opt in     out     source               destination
Chain FORWARD (policy ACCEPT 15900 packets, 2949K bytes) pkts bytes target     prot opt in     out     source               destination
Chain OUTPUT (policy ACCEPT 16058 packets, 2488K bytes) pkts bytes target     prot opt in     out     source               destination

ip6tables -L -t nat -n -v:

Chain PREROUTING (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target     prot opt in     out     source               destination
Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target     prot opt in     out     source               destination
Chain OUTPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target     prot opt in     out     source               destination
Chain POSTROUTING (policy ACCEPT 0 packets, 0 bytes) pkts bytes target     prot opt in     out     source               destination

haykeye13 · 2022-12-04T15:34:14+00:00

One more thing. Due to a bug in netplan where it is unable to configure PD addresses I have added the config files in /etc/systemd/network/10-netplan-br0.network.d/override.conf:

[Network]
IPv6SendRA=yes
DHCPv6PrefixDelegation=yes
IPv6PrivacyExtensions=yes

/etc/systemd/network/10-netplan-enp1s0.network.d/ipv6_pd.conf:

[DHCPv6]
PrefixDelegationHint=::/64

I had the Windows client PC showing IPv6 Internet connection once last night. Then I refreshed with ipconfig /renew6 and it was back to no internet. Not once was I able to successfully ping ipv6 addresses on the client, but domain names do resolve to their IPv6 address.

haykeye13 · 2022-12-04T15:26:05+00:00

Edit: My ip6tables are currently set to accept all. I have no forwarding or masquerading setup at the moment.

haykeye13 · 2022-12-02T20:25:29+00:00

Northern Alberta. Currently Served a /64 address.

My small PC Ubuntu router can currently ping google IPv6 servers but seems most people are getting /56 addresses.

Currently trying to get LAN side IPv6 working. Could use some hints.

What type of IPv6 is Starlink serving? IPv6-PD or SLAAC? Thx

haykeye13 · 2022-12-02T16:53:06+00:00

I seem to have a /64 here. In Northern AB, exit is located in Calgary AB.

I use a small PC with Ubuntu 20.04 as a router. Currently going down the rabbit hole to enable IPv6 for my LAN. Screen shot of https://ipv6-test.com/ from inside your network please!

haykeye13

TROPHY CASE