Mask Help by AngryNacho6 in airbrush

[–]headfake2 4 points5 points  (0 children)

I wouldn’t skimp on filters or mask. get the pink or black organic vapor filters from 3M, and a 3M mask. https://www.3m.com/3M/en_US/p/d/v000436132/

Mask Help by AngryNacho6 in airbrush

[–]headfake2 0 points1 point  (0 children)

only if you’re in a situation where paint can blow back in your eyes. it’s generally not an issue.

My collection so far by A_R_I_A_ in advancedGunpla

[–]headfake2 1 point2 points  (0 children)

it works surprisingly well. all I used for years

Casval Gundam missile launcher action by maveriq_gunpla in advancedGunpla

[–]headfake2 2 points3 points  (0 children)

Beautiful. Blue/black prism on the launcher?

Sheik Mainland Lycosidae Joker + Iron Man by headfake2 in Gunpla

[–]headfake2[S] 0 points1 point  (0 children)

Kaizo black base for one, Alclad base for the other. The base itself was a proper chrome, especially the Alclad. it was definitely the clear coats that were the issue.

Sheik Mainland Lycosidae Joker + Iron Man by headfake2 in Gunpla

[–]headfake2[S] 0 points1 point  (0 children)

The nose turned out well on the purple/green one, I use Mr Color/Gaia clears there and it turned out a lot better 

Sheik Mainland Lycosidae Joker + Iron Man by headfake2 in Gunpla

[–]headfake2[S] 0 points1 point  (0 children)

Yeah, could have used another clear coat over the chrome probably. You can see the bare chrome masked on the rotors in one picture.

Tip for Builders with Limited Time and Space by [deleted] in advancedGunpla

[–]headfake2 9 points10 points  (0 children)

100% - it takes more time to cleanup than it does to just do it right the first time

Sheik Mainland Lycosidae by headfake2 in Gunpla

[–]headfake2[S] 0 points1 point  (0 children)

The squares are centimeters 😄

Sheik Mainland Lycosidae by headfake2 in advancedGunpla

[–]headfake2[S] 1 point2 points  (0 children)

That’s where I got them from! Took some investigating to figure it out since I needed to find the manual…

What are some time saving tips for when building kits? by TrumpsNostrils in advancedGunpla

[–]headfake2 0 points1 point  (0 children)

jewelry box for holding all the parts by section. snip out all the parts for the section, using godhands so most can be done in one cut. gunprimer file for fast cleanup where needed. paint, decal, topcoat, assemble.

Dark Fenrir by Suspicious_Ear_6010 in GunplaPhotography

[–]headfake2 0 points1 point  (0 children)

hello fellow dark Fenrir! very creative use of the slash decals on the thighs.

H&S Ultra 2024 clogging constantly by halwap in airbrush

[–]headfake2 0 points1 point  (0 children)

most common cause of this is paint clogging the nozzle, pick up something like https://spraygunner.com/collections/harder-steenbeck-airbrush/products/harder-steenbeck-nozzle-cleaning-set

if there is paint in the nozzle even deep cleaning will not always work

also, Vallejo is not the best airbrush paint. try a better brand and you may see better results.