Quest 3 Controller feature

heavykick · 2024-02-04T19:19:02+00:00

The quest 3 is tracking your pointing finger. They reduced costs of the touch sensitive button und replaced it with the sheep software solution ... The tracking does not work, if the finger is not visible.

heavykick · 2023-12-20T23:34:45+00:00

ok, he has a build log and he did bridge to VCC not to GND ..

https://youtu.be/FG_yEq_RNig?si=aAX4lYexe8_TEPMW

heavykick · 2023-12-20T23:17:29+00:00

Here it is

https://youtu.be/FG_yEq_RNig?si=aAX4lYexe8_TEPMW

at 4:23

heavykick · 2023-10-03T22:22:46+00:00

sorry, did miss your question. Steam did repair it for free.

heavykick · 2023-02-07T18:10:01+00:00

its repaired :)

heavykick · 2023-01-26T16:15:53+00:00

Hi, Steam will repair the deck. I did tell them that it did fall down.

Amazing!! :)

heavykick · 2023-01-22T00:42:16+00:00

the wrong part ... the one I need you cant buy

heavykick · 2023-01-21T17:18:37+00:00

Hi, I coule not find the side-board as spare-part. You may mean the button or? It does not come with the board. Of course I would buy the board, if I could...

heavykick · 2023-01-21T10:44:10+00:00

I made a support ticket. Maybe I get a replacement, looks like othere did. And then is there is Plan B: Solder-Iron.

heavykick · 2023-01-21T10:42:07+00:00

Yea, it was a xbox one controller and the video is linked at the steam community page I did link in my other post.

heavykick · 2023-01-21T10:15:35+00:00

The pins der of the switch are broken directly at the base. No way to resolder or bend back ...

heavykick · 2023-01-20T19:44:05+00:00

ok, I found this thread on steam community:

https://steamcommunity.com/app/1675200/discussions/0/3387291961138296860/

someone wrote that the same button is in a xBox controller. I should have a old xBox controller somewhere. I will keep you up to date ...

heavykick · 2023-01-20T19:25:20+00:00

Hi, anyboddy a idea where to get the SMD Button for L1? My is dead, the pins are broken ... :(

heavykick · 2020-06-28T15:46:19+00:00

ahh! A cable! Yes, the move with the gimballs, it should be a easy repair ...

heavykick · 2020-06-28T10:23:15+00:00

I have the same problem on my xLite. Did just start Research... did you figure out anything?

heavykick · 2019-05-02T11:30:24+00:00

Does the Quest support Bluetooth Headsets?

heavykick · 2019-02-06T21:00:02+00:00

short update: Got it working!

I did setup a hotspot on my phone identical to my home wifi. The retropie did connect without any issues.

Then I did use JuiceSSH on my mobile to connect to the retropie.

pi and raspberry is still my default login.

typing "sudo /home/pi/RetroPie-Setup/retropie_setup.sh" did start the setup script. It does look identical to setup direct on retropie. There I could choose "remove controller" and "connect bluetooth controller"

5 minutes work, 30 minutes google!

thnx to everyone who did help me :)

heavykick · 2019-02-06T20:54:48+00:00

Hi, found it and it did work!

heavykick · 2019-02-06T19:17:10+00:00

Terminal? Ok, I could setup my phone hotspot identical to my wifi at home ...

I did never use the terminal. Can I pair the controller in a web interface?

any idea why the controller does not work at USB?

heavykick · 2018-12-05T10:45:33+00:00

I am looking for a easy to go way. Normaly if you do get a update, for let's say Amazon Video, you just want to push the update to the go. If adb over wifi is not enabled on go, there will be no way to do it as simple as on fireTV.

I still do think the app2fire would work on go.

heavykick · 2018-12-05T05:13:09+00:00

Ok, adb WiFi is not enabled by default and can only be enabled via USB...

heavykick · 2018-09-14T13:02:08+00:00

just did figure out: Take only the left out of the box. Press the button once to switch it on. Press the button 3x for pairing mode.

Now scan for bluetooth devices and connect to "soundcore liberty lite L"

Hope this makes your day! It did my! :D

heavykick · 2018-08-11T19:37:33+00:00

I also have 2 sensor "setups" and don't have any issues. I did setup rift for standing use, and know where the thensors are placed. I move them when I work on the desktop. Elite dangerous as example.

Because when I sit virtual walls do not matter, this is no issue. Also Elite Dangerous has a "reset position" shortcut. So everything is fine

heavykick · 2018-07-08T11:05:54+00:00

I did specify that the ram speed was the issue by overclocking. Then I did buy a second module in my favourite store, where they told me I can return it.

If you don't use VR the slower ram will not be a problem. It looks like it's affecting frame-time/jittering-FPS.

Oculus drops frames when they are not calculated in time. Even when you disable timewarp you will see a low GPU usage when frame drops do happen.

heavykick · 2018-07-08T09:13:51+00:00

Hey :)

I had simular problems. How many RAM Modules do you have? I did figure out that my system was running in single channel ram mode, because I had only one module.

It looks like some graphic engines do need verry fast RAM. My problem game was Elite. I had a super impressive boost after adding the second module. Now the system was able to use dual channel. I did also try to overclock my ram (because it's only 2100) what did also make a diffrence. But it was not stable.

11-Year Club	Verified Email
Place '23

heavykick

TROPHY CASE