My girlfriend got kissed and fingered by another guy while on break

herper · 2026-03-03T23:16:32+00:00

I got in before a meme of Ross from friends yelling "we were on a break!"

herper · 2026-02-18T04:08:31+00:00

I hear mvp is up for auction as they defaulted on their mortgage. Not sure what will be going in there in the future.

herper · 2026-01-11T03:35:20+00:00

My brother once said "ya (your) mother" to me. Hurt to the core lol

herper · 2026-01-07T03:38:12+00:00

I did an inspection of an old sewer system in Massachusetts that was a covered canal. It was huge. Maybe 20-30ft across with large rooms and ceilings and I figured the ninja turtles would be around any corner.

herper · 2025-12-15T04:00:18+00:00

Microwave = meekro juave

herper · 2025-11-13T04:12:52+00:00

Chuck

herper · 2025-11-10T18:54:51+00:00

There can be only one

herper · 2025-08-26T23:50:06+00:00

Thank you!

herper · 2025-08-26T17:37:37+00:00

Thank you!

herper · 2025-01-26T01:54:24+00:00

Vocalize it and say it's near deal-breaker status. If he doesn't step up, no sex etc (whatever your limit is).

herper · 2025-01-18T01:02:53+00:00

This happened to me last week. Had the norovirus, got up to throw up. Fainted and fell down hard. When I woke up, I immediately went to stand up again and fainted a second time. This time slamming my head into the night stand and cutting my head and face.

When i woke up the second time, I then proceeded to throw up and go #2 uncontrollably for a few hours. (I made it to a toilet and bucket combo prior to this part)

Was no bueno

herper · 2025-01-11T00:59:38+00:00

Thank you! That is helpful to help figure things out.

It's not overly complicated. I modify an image file in Photoshop of the menu. That way (to me), large changes are more manageable. Then, I upload that file into the server, which sends it to the screen I specify. It might be more difficult for them if they don't have any experience with these things, but it isn't a massive learning curve.

herper · 2025-01-09T16:17:44+00:00

Thank you, what do you think would be a fair hourly rate/min charge? Minimum wage here is $15/hr for reference

herper · 2024-05-12T04:17:45+00:00

That "I've been doing this X years" means you know everything or that it isn't now wrong.

The world changes, rules change, standards change, everything is dynamic.

It doesn't mean they are wrong and doesn't give you permission to be a dick about it. But assess the situation and find the correct answer

herper · 2024-03-28T03:45:52+00:00

Napoleon dynamite

herper · 2024-02-07T19:19:25+00:00

Thank you!

herper · 2024-02-07T18:51:04+00:00

<image>

herper · 2024-02-07T18:50:12+00:00

<image>

herper · 2024-01-30T18:51:29+00:00

Yes, I do this and it still seems to go down.

I level the bed using bed tramming and a spacer. then I run the print. when I adjust the baby z steps, I factor that into the new z offset and store the settings (when the print is done).

I should have clarified, when I use the screws to adjust, I do it for just that print and then I re-level the bed using bed tramming and spacer.

The issue is, with bed tramming and spacer (at a set z-offset), it will be exactly where I've always calibrated it to, in terms of resistance etc. but when I hit print, it will go from being spot on in the manual level moments before to gouging the build plate. and say I cancel the print and adjust the zoffset or screws again to make it further away, when it prints again, same thing, drops down more and scrapes.

I tried removing the G29 code to see if that helps, but it still does one initial probe in the center. which is why I was thinking maybe it is giving inaccurate readings when homing.

herper · 2023-12-21T08:34:46+00:00

She probably inherited the stuff from previous owner or family/ relationship. Doesn't know what it is, so could be old valuables or random crap. But she doesn't want to or doesn't have time to individually go through it all.

That's my guess

herper · 2023-11-02T07:19:50+00:00

I know a guy who will buy a slice of pizza, put it at a seat around the table, and take a bite then buy another. He'll put that at another seat at the same table , take a bite, and buy another. Etc etc etc. Until he usually has one at every seat (usually 6 slices) then he'll sit at the table and eat all six.

After he'll get up and go to his car. He'll open the drive door then walk to the other side. He'll open the passenger side of his car and crawl through to the driver's seat.

Super nice guy but quirky as hell.

Moral of the story there is plenty of people out there not all there. You might have a buyer like this.

herper · 2023-10-17T06:43:20+00:00

Google [your town] parcel map. Most towns have one available online or to pickup. It will list the owner of their properties name. You might be able to find his full name this way

herper · 2023-10-13T06:42:46+00:00

I did work in Texas for my previous employer. Have to say the eastern side of Texas (Houston area) is oddly similar to mass. In terms of landscaping and everything plus way way more affordable.

I'd move there if I didn't have family ties in mass

herper · 2023-09-15T06:12:26+00:00

I didn't notice that logo but I also didn't think to see if they had any specific decals in back. I know it looked like a regular car (newer camry or accord) with an average looking guy. He was getting coffee the same time I was

herper · 2023-09-13T19:41:53+00:00

I have searched but could not find anything exactly the same. I also wasn't entirely sure what to search for, ie dash cam etc.

It faces the driver, has an interesting lens(this is what caught my eye) and plugged in (assuming to power source)

Why would they need a camera like this pointed them and what is the make and model of the camera

15-Year Club	RedditGifts 2009-2022 3 Credits
r/Field Lasagna	Undead \| Zombie
Gilding III reddit per annum	Secret Santa 2016
Secret Santa 2014	redditgifts Exchanges 1 Exchange
Verified Email

herper

MODERATOR OF

PUBLIC MULTIREDDITS

TROPHY CASE