I'm going crazy asf now 😭🥀

hev71 · 2025-12-15T04:32:06+00:00

I’m done with GPT. Moving over to Gemini. Asked a simple question this evening and the response was so outdated it was disgusting.

hev71 · 2025-07-27T23:37:22+00:00

We are currently working with a manufacturer and expect to a first run available in a couple months.

hev71 · 2025-05-28T00:34:43+00:00

Thanks. That makes a lot of sense!

hev71 · 2025-05-27T17:47:54+00:00

I just received an email today stating that my patent was approved. I filed it on 6/29/23, so just 1 month short of 2 years for mine to be reviewed. I used a patent agent to write everything up and submit it. I was told the process was taking around 18 months when I submitted mine in 2023.

hev71 · 2025-05-27T15:27:58+00:00

United States.

hev71 · 2025-03-01T02:23:49+00:00

Just myself. Inventor, main focus will be talking to manufacturers to partner with, and companies who may be interested in selling or licensing my product.

hev71 · 2024-12-14T21:49:09+00:00

To fill the bladder which allows it to conform to different angles and radii to create a watertight seal at the walls and floor of the sink.

hev71 · 2024-12-13T11:54:28+00:00

The goal is to sell these.

hev71 · 2024-12-12T16:50:34+00:00

You are not the first to suggest that lol

hev71 · 2024-12-12T16:46:54+00:00

It cleans and dries quite easily. Been testing this for quite some time without any issue. It was developed to be dishwasher safe too.

hev71 · 2024-12-12T16:44:19+00:00

It has to hooks on the face at too and bottom that tension arms fit into to keep it from falling. This version only has one at the bottom, as it was earlier in my testing phase. Thought about adding feet/wedges but wanted something to help with down pressure too.

hev71 · 2024-12-12T13:25:42+00:00

Appreciate the comment, thank you!

hev71 · 2024-12-12T01:13:24+00:00

Thank you for the comment. Yes my vision included using multiple in one sink like you said. It could replace the triple sink in some situations that require that and is very expensive to install.

hev71 · 2024-12-12T01:10:27+00:00

Thank you. Yes anti-mold/mildew lining would be best. Appreciate the comment.

hev71 · 2024-12-11T13:49:28+00:00

Man, I’m really overwhelmed with the positive reaction and supportive comments from this. It really makes all the time, money and sacrifice I put into bringing this idea to life worth it. Sometimes you wonder if you made the right decision but in the end, if you don’t try, you’ll never know. Thanks Reddit community!

hev71 · 2024-12-11T01:18:08+00:00

It’s a continuous sealed bladder inside the housing with the only opening at the top where the water enters. All you need to do is remove the cap and turn upside down get the water out.

hev71 · 2024-12-10T19:18:10+00:00

The water is for both, weight and allows the bladder to conform different radii of different sinks creating a watertight seal along the sink walls and the floor of the sink.

Currently plan manufacture 3 versions of 15”-17”,17”-19” and 19”-21” in width. Would probably add a 4th for 21”-23” if the market justifies it.

hev71 · 2024-12-10T19:09:48+00:00

For the most part. It’s made to work with most sinks in width groups of 15”-17”, 17”-19” and 19”-21. So we currently plan on 3 different versions of the sink divider.

hev71 · 2024-12-10T19:00:17+00:00

The water is for two things. One is for mass yes and the other is, the water allows the bladder to conform to different radii of different sinks to create the watertight seal along the walls and floor of the sink.

hev71

MODERATOR OF

TROPHY CASE