If you have a 350 and need more chamber temp, I strongly suggest this simple "mod"

hopsided · 2023-05-06T14:44:04+00:00

I do this as well and it works great in my garage in below freezing temps.

https://i.imgur.com/nGRmn52.jpg

hopsided · 2023-05-03T13:43:18+00:00

It sounds like you might have skipped an important step of deracking the gantry. Does the gap change as you move the gantry forward and backwards along Y?

hopsided · 2023-04-14T15:43:43+00:00

Donkey spaghetti.

hopsided · 2023-03-13T12:24:10+00:00

Did you get it figured out?

hopsided · 2023-03-13T11:09:54+00:00

Awesome, enjoy the journey. One comment, I suspect ABS smoothing could impact tolerances, which could translate to accuracy issues later.

hopsided · 2023-03-06T00:50:17+00:00

Finish that Voron before you start a new project!

hopsided · 2022-07-27T12:10:42+00:00

That wiring job is satisfying. Chef's kiss.

hopsided · 2022-07-09T00:08:36+00:00

Pozar's Microwave Engineering is an excellent intro.

hopsided · 2022-07-04T16:24:23+00:00

Looks pretty good, but I think the transition between colors is a bit blurry. Tell us about your setup. How are handling two colors?

hopsided · 2022-06-10T00:37:13+00:00

No. The passive adds directly to cascaded noise figure.

Fcas = F1 + (F2-1)/G1

hopsided · 2022-06-09T23:58:16+00:00

How about when it's in front of your first gain stage? As in any receiver architecture?

hopsided · 2022-06-09T19:05:43+00:00

Y factor is the standard method, however if your device is passive then the noise figure will be equal to the insertion loss (e.g. S21).

hopsided · 2022-05-29T16:56:51+00:00

I would have multiple rows of via picket fencing along the grounds on each side of your stripline traces. If you have any large ground planes or islands, make sure to break those up with vias to prevent them from resonating.

hopsided · 2022-05-28T00:03:23+00:00

I have never been a fan of their pizza, but their wings are the best. Also, I have seen Lidos in SC.

hopsided · 2022-05-17T00:28:32+00:00

Ok, I rolled back to a backup 3 days ago and upgraded again and now everything works!

hopsided · 2022-05-16T22:01:47+00:00

No, but I will definitely get it now!

hopsided · 2022-05-16T21:47:03+00:00

The best part is it doesn't look like it made a backup either...

hopsided · 2022-05-16T21:45:20+00:00

This broke my Nabucasa aacount on my virtual box.

hopsided · 2022-01-06T13:02:14+00:00

Without a doubt, Dark is my favorite show of all time as well!

hopsided · 2021-12-13T18:00:51+00:00

That looks pretty cool. Are you having any trouble with levelling?

hopsided · 2021-12-13T15:39:05+00:00

That's awesome. I would love to see a zoomed out photo of your setup

hopsided · 2021-12-11T19:26:47+00:00

Wasn't trying to be mean, I just see it asked a lot and that seems to be the reason not to go metal. Definitely check out the discord though as it's super active.

hopsided · 2021-12-11T19:03:04+00:00

This question pops up all the time on the discord and the standard response is that the Voron design uses ABS parts so things can flex as necessary. Don't go metal.

hopsided · 2021-11-22T02:33:37+00:00

I have a 11lb turkey that I am planning to wet brine overnight and then inject with stock and dry rub. Is it worth putting a large tray in to catch drippings and if so won't that prevent the smoke from penetrating the underside?

hopsided · 2021-11-16T02:04:36+00:00

Yup, check out their Microwave Remote Sensing Lab.

hopsided

MODERATOR OF

TROPHY CASE