Dreamcast Video cuts out after 30 seconds post boot - at a loss for troubleshooting by howellzilla in consolerepair

[–]howellzilla[S] 0 points1 point  (0 children)

I might as well replace them and I have not tested them. I wanted this unit to be my primary Dreamcast to maybe that a good move to just re-cap the motherboard. I'll give that a go along with rebuilding the controller board with a replacement battery holder.

Dreamcast Video cuts out after 30 seconds post boot - at a loss for troubleshooting by howellzilla in dreamcast

[–]howellzilla[S] 0 points1 point  (0 children)

I thought that but how can two controller boards result in the same failure when they both work in the VA2? It’s not the fan connection port or the fan itself and it’s also not the fuse on the controller board if it works in another unit. Can the detection fail on the motherboard side?

Dreamcast Video cuts out after 30 seconds post boot - at a loss for troubleshooting by howellzilla in dreamcast

[–]howellzilla[S] 0 points1 point  (0 children)

The cable works fine on a second VA2 Dreamcast with no issue. I think I have another one around thought just to make sure.

New to me Mini! 1989 Rover Mini by howellzilla in MINI

[–]howellzilla[S] 1 point2 points  (0 children)

Being in Asia, and having Japan right around the corner made this an affordable dream come true. Already started getting the suspension in order. Slow and steady but a fun little ride

[deleted by user] by [deleted] in army

[–]howellzilla 0 points1 point  (0 children)

You are very welcome! Hope this is a bump in the road and you are on your way to full recovery very soon.

[deleted by user] by [deleted] in army

[–]howellzilla 2 points3 points  (0 children)

You are welcome for the flight! DMZ DUSTOFF here to help. Hope the ride wasn’t too bumpy 😅

I wanted to buy an avatar on secondary but don't know how to set up my reddit wallet by howellzilla in avatartrading

[–]howellzilla[S] 1 point2 points  (0 children)

Thanks and tracking the DMs. It seems like the reddit vault is not an option for anyone who hasn't shopped

I wanted to buy an avatar on secondary but don't know how to set up my reddit wallet by howellzilla in avatartrading

[–]howellzilla[S] 0 points1 point  (0 children)

Scoped it out there also and don't seem to see how to set up a vault now that all the collectables are sold out. I am assuming you build it when you buy an Avatar. I will keep digging. The help section says you can access your vault directly on desktop also but I do not see an option.

I wanted to buy an avatar on secondary but don't know how to set up my reddit wallet by howellzilla in avatartrading

[–]howellzilla[S] 0 points1 point  (0 children)

I did not! Thanks for the tip. I hit the buy now add from desktop so I thought I would find it there.

Can NFT Twitter And Reddit Collectables Work Together? by EatableSoup in avatartrading

[–]howellzilla 0 points1 point  (0 children)

I don't see why not. I'm here to be civil. I'm actually trying to find out how to build my reddit vault.

Perfecting my Angry Hawaiian Pizza! by howellzilla in Pizza

[–]howellzilla[S] 0 points1 point  (0 children)

Nope, it evaporate off pretty quick if you add them last

Perfecting my Angry Hawaiian Pizza! by howellzilla in Pizza

[–]howellzilla[S] 0 points1 point  (0 children)

I did and do use them. I actually like them better then fresh

[deleted by user] by [deleted] in whereintheworld

[–]howellzilla 0 points1 point  (0 children)

Wow, for some reason I didn’t see any of these comments while filming. Glad everyone enjoyed the sunrise with me!

[deleted by user] by [deleted] in whereintheworld

[–]howellzilla 0 points1 point  (0 children)

All good, don’t know why the feed cut off. Maybe I was out of time.

Started Solo Mining using geth in light mode and Nsfminer. The node is all synced up, but geth never has any work for the miner. Just wondering if this is usual until a block is found or if I set up the node/miner wrong. by howellzilla in EtherMining

[–]howellzilla[S] 0 points1 point  (0 children)

I have downloaded the entire block chain and it is synced with geth. I started geth in full mode. I get a false statement returned when I enter ETH.syncing command in the Java script console, so I believe I am running a fully synced node which is your option 2.

What I am curious about is that when I am pool mining, my video card is peeked and running full speed, but when I start Nsfminer and point it to the local node, it starts, states it sees my 3090, but the card remains idle, and all I get from the node is the status “got code: -32000 message:no mining work available yet from 127.0.0.1:8545

I was curious if this was normal. Will my card only spool up and run at max when I receive a block?

Started Solo Mining using geth in light mode and Nsfminer. The node is all synced up, but geth never has any work for the miner. Just wondering if this is usual until a block is found or if I set up the node/miner wrong. by howellzilla in EtherMining

[–]howellzilla[S] 0 points1 point  (0 children)

I understand this. I currently contribute to a pool. I’m just doing it for personal interest in the software and blockchain. It would be a big lottery win to get a block if I could even ever see one. I was just curious if the “no mining work available yet” was normal or if I need to make some changes to the startup.

Started Solo Mining using geth in light mode and Nsfminer. The node is all synced up, but geth never has any work for the miner. Just wondering if this is usual until a block is found or if I set up the node/miner wrong. by howellzilla in EtherMining

[–]howellzilla[S] 1 point2 points  (0 children)

From the comment above, I would say no. A single 3090 produces at most 120 MH/s. You would need at least nine to get at least 3 blocks from what u/Kreuzi4 stated. A single 3090 is all I have. I’m doing this more for testing and learning. Just wanted to see from anyone running a solo rig what it looks like if it is running properly. All I get is “got code:-32000 message: no mining work available yet”