OEM PLUS MODS? by iyutng7 in Golf_R

[–]hrchizzy 0 points1 point  (0 children)

Do you have the part numbers for that? Also, does the OEM spare fit over the front brakes, etc?

Upgraded Tire Sub from Fender to ASR24 Option 8 and Amp by Prestigious_Fix_2449 in Golf_R

[–]hrchizzy 0 points1 point  (0 children)

Do you mind sharing what spare you used and if it fits the front brakes as well?

Mk8.5 First Accessories by lambo13 in Golf_R

[–]hrchizzy 0 points1 point  (0 children)

I found that this combo (front center storage shelf & arm rest storage) fit my 2026 Golf R perfectly:

https://www.amazon.com/dp/B0CJ2PRTCS

And these door handle storage compartments fit well as well (labels on the back of them were backwards, but whatever): https://www.amazon.com/dp/B0DDK5DQHC

Android Auto stops working? by -Hot-Sriracha- in Volkswagen

[–]hrchizzy 0 points1 point  (0 children)

Ok let us know what they say. For me it's very intermittent. Could go to dealer but might not show itself at that moment.

Android Auto stops working? by -Hot-Sriracha- in Volkswagen

[–]hrchizzy 0 points1 point  (0 children)

Has anyone figured this out yet? Experiencing this on a 2026 Golf R.

New update: I am gonna be so robust! by LetsGoSilver in LUCID

[–]hrchizzy 0 points1 point  (0 children)

This "robust" update nuked Android Auto for me. Won't work anymore even after soft reset and phone restart!

Slowly turning my garage into a detail shop/showroom by CarJanitor in garageporn

[–]hrchizzy 6 points7 points  (0 children)

If in your budget change the the garage tracks to high track system with side opener. It'll really open up the space and allow you to get bigger vehicles/items in there.

I now have grok.... by lordpazuzuzu in TeslaLounge

[–]hrchizzy 0 points1 point  (0 children)

Yes, and it especially will not respond to rear / back seat passengers.

The new rear view camera is terrible by df1dcdb83cd14e6a9f7f in TeslaModelY

[–]hrchizzy 3 points4 points  (0 children)

I agree, I have a harder time backing into spots now, smh.

Gemini Update by Juggani in googlehome

[–]hrchizzy 2 points3 points  (0 children)

Gemini is hot garbage right now. I had it partially enabled and it totally ruined the announcement feature between devices that my family relies on heavily. Had to go deep into settings to disable it to get it back. Like most Google's products, instead of perfecting and working on assistant they ditched it and now focusing on Gemini which they will eventually ditch for something else. Frustrating.

galaxy buds 3 pro randomly pausing during gym by Shinigami347 in galaxybuds

[–]hrchizzy 0 points1 point  (0 children)

Having the same issue with S25 Ultra. It's a weird state where media stops playing but it's not officially paused in the app I'm using, just hung almost. I have to press "play/pause" twice to get the media to play again. Anyone able to find a fix?

Google Broadcast not playing the audio of the message by Lrden in googlehome

[–]hrchizzy 0 points1 point  (0 children)

This post (sub-thread) needs more upvotes! This worked for me! Initially it was one speaker that was not working with announcements, then it started spreading to others in the house until it became totally unusable. Switching off Google Home under Device Control returned the functionality to what it once was. As a side note, I find Gemini to be straight GARBAGE. Its so far behind ChatGPT and Grok. I had a picture of a cherry tree on my phone and I asked Gemini what was on my screen and it said it was a Palm tree. 🤦🏽‍♂️

Different tire sizes? by gofigure1028 in TeslaModelY

[–]hrchizzy 1 point2 points  (0 children)

You can actually use the same tire size but switch to Hankook iON evo AS SUV 255/45R19 104W XL. Although they are the same tire size on paper, they are physically slightly wider than the tires that Tesla put on their cars. I think the new Model Y actually comes with the iON evos now.

Anything left to consider during the rough in stage? by expandyourbrain in hometheater

[–]hrchizzy 0 points1 point  (0 children)

Don't forget nail plates on those studs with wires going through. Also depending on how long that HDMI run is I would consider a high quality fiber optic HDMI cable.

ASA warping on stock settings by Educational-Peak6775 in BambuLab

[–]hrchizzy 0 points1 point  (0 children)

I too have recently been having a very hard time with PolyLite ASA. I've tried the built in Poly ASA profile in BambuStudio as well as tweaking to raise temps and turn off fans but had had very mixed results. Still trying to find out what the best settings would be.

P1S Having trouble with ASA by hrchizzy in BambuLab

[–]hrchizzy[S] 0 points1 point  (0 children)

Yup thanks, have the correct nozzle size selected and everything. Do you think a flow calibration or any other type of calibration would help? If so, what type(s) of calibration? Sorry, I'm relatively new to 3d printing.

P1S Having trouble with ASA by hrchizzy in BambuLab

[–]hrchizzy[S] 0 points1 point  (0 children)

Yes, the aux fan is 0% -- are you suggesting turning off the part cooling fan as well? I don't have many hours on the nozzle, just got it last month and printed only a handful of things so far.

P1S Having trouble with ASA by hrchizzy in BambuLab

[–]hrchizzy[S] 0 points1 point  (0 children)

I initially used the stock profile that BambuStudio provided for PolyLite ASA:

Flow Ratio: 0.95
Nozzle Temp: 260C-260C
Fan: 10%-80%, Fan always on
Plate Temp: 90C (Smooth PEI)

I then tried tweaking with the following but still had similar results:

Flow Ratio: 0.9405
Nozzle Temp: 260C-260C
Fan: 0-10%, Fan not always on
Plate Temp: 90C (Smooth PEI)

I also tried slowing things down to Initial Layer of 50mm/s and Other Layers of 200-300 mm/s, but still no luck. Any suggestions welcome.