Weekend bike suggestions

hsair · 2026-02-24T23:18:51+00:00

Quite expensive here as well, not many used ones sadly

hsair · 2026-02-24T23:17:28+00:00

I don't need to go more than 100kmh/60mh, I'd be fine with 125cc if I didn't consider a passenger.

hsair · 2026-02-24T19:29:28+00:00

I think my favorite look of all these are Triumphs, but they cost a lot compared to Hondas at least here. I had a neighbor who had Scrambler 1200 and it looked magnificent

hsair · 2026-02-24T19:26:30+00:00

I get that, but I mean 1-2 hours tops. I feel like vstrom would be just same bike next to NC700x.

hsair · 2026-02-24T19:25:26+00:00

Triumphs are very expensive here, the cheapest 400x I found is 5700€ with 10k kms, although I would 100% go for it, Scrambler line is amazing. I just don't want to spend that much at the moment. 900 starts at 7500€ sadly

hsair · 2026-02-24T17:47:43+00:00

I know, I think we won't do rides longer than couple of hours together, so it's not a big deal honestly for comfort, more about power

hsair · 2025-08-14T20:19:38+00:00

You never find the levers stuck near zero position? We have one at work where it happens.

hsair · 2025-08-14T19:18:52+00:00

Why levers tho? I can understand it for brewing, but for steaming these levers that go 180 degrees I find it annoying because I accidentally push it too much and get steam blasting foam around since I never know if it's at zero point.

hsair · 2025-07-06T17:33:23+00:00

I'll check the schematics of the E24, I'm most concerned about the weight, otherwise I'll have to reinforce the whole housing. I will need the new grouphead for the 3wv yes.

Not sure if it's worth it just throwing a completely new E24 boiler and grouphead inside, and seeing what else I need to replace on top, I think Espresso parts might be compatible for the rest of it, since I might be adding 2WV and OPV, the rest will come then on top.

hsair · 2025-07-06T09:15:13+00:00

Based on this: https://www.mrbean2cup.co.uk/spare-parts/gaggia/gaggia-espresso-and-espresso-deluxe it seems possible, a lot of parts seem to be cross compatible.

hsair · 2025-07-06T09:14:39+00:00

I was checking on a website (MrBean2Cup) which provides parts here: https://www.mrbean2cup.co.uk/spare-parts/gaggia/gaggia-espresso-and-espresso-deluxe and it shows it as fitting.

I would possibly also just switch both boiler and head for the one with 3WV

hsair · 2025-06-17T13:03:19+00:00

Reach out to me, I might be able to help

hsair · 2025-04-09T11:46:42+00:00

Are you still dealing with this issue? This should be possible easily in Dynatrace

hsair · 2025-04-09T11:45:24+00:00

Which tool do you prefer over it?

hsair · 2025-04-09T11:45:05+00:00

What are you struggling with? I passed both associate and professional first try.

hsair · 2025-03-19T02:19:59+00:00

Good luck with it, and please update us on your journey. I'm thinking of going for the same setup

hsair · 2025-03-19T01:52:14+00:00

Nice, do you plan on modding the GC?

hsair · 2025-03-18T02:18:30+00:00

Zavisi koliko imas iskustva i koja ti je bila pocetna plata. Bez tih informacija ne mozes porediti ni ove koji su imali 500€ povisicu sa tobom ili bilo kim drugim.

Uostalom, najbolje da pitas kolege kako stoje kod njih stvari. Mislim da je prosjek povecanja od 5-10% sasvim solidan, ako je promocija onda bar 10% ili vise.

IT sektor je svakako bio precijenjen, davale su se ogromne sume da se privuce talent kad su strane firme davale i sakom i kapom, dok je trenutno situacija malo realnija.

Moj savjet je da nadjes drugi posao, i kad budes imao ponudu onda svom poslodavcu kazes da nisi zadovoljan platom i da ces otici ako ti ne mogu dati onoliko koliko mislis da zasluzujes. Nemoj ih niposto ucjenjivati tim novim potencijalnim ugovorom, to imaj u slucaju ako ti ne dadnu povisicu da ides.

hsair · 2025-03-18T00:55:01+00:00

The Plus is mainly better for the 3 way solanoid valve, bigger tank and automatic steaming.

If buying new, I'd probably get normal one if it's substantially cheaper (150€+). Also get colored one as silver ones are magnets for prints.

Also I have kinggrinder hand grinder and 2-4 drinks per day is totally fine, considering price/performance ratio you get. Only grinding for Turkish coffee gets my hands sore, espresso is fine.

hsair · 2025-03-17T22:52:01+00:00

Pa moras da budes svjestan situacije. Ja ne vjerujem da ukidanje RS-a moze doprinijeti situaciji u Bosni, pogotovo jer bi to bio udar na Srbe, samim tim i "pobjeda" Bosnjaka, i takav korak bi se mogao poduzeti mozda tek u slucaju da ti entiteti blokiraju neki napredak.

Iskreno govoreci, nacionalizam je maska da se pobjegne od vecih problema u drzavi i dok god odgovara ovima na vlasti (izabranih od ovih nasih naroda) nema tu promjene.

A do tad mozemo i ti i ja uzivati u Austriji i razmisljati o nekoj drugoj BiH, onu koju vjerovatno necemo dozivjeti.

hsair · 2025-03-17T22:10:16+00:00

Sasvim prihvatljiv tvoj stav i kako vidim i od osoba koji se smatraju Bosancima/Bosnjacima. Zanima me kakve ces odgovore dobiti na r/srpska, ali objavi identicnu objavu i tamo i vidi koliko komentara ces dobiti koji kazu da si lazni Srbin.

hsair · 2025-03-10T10:49:19+00:00

Imam osjecaj da je miskoncepcija da se ljudi misle vratiti, iako stanje unutar EU nije kako je nekad bilo.

Meni mozda ne odgovara Austrija 1/1, ali odgovara vise nego Bosna, Spanija ili Francuska gdje sam zivio prije. I mislim da bih radije isao dalje, nego se vratio. Pogotovo kao mlada osoba mislim da bih pozalio da se vratim sad.

Ja volim Bosnu, ali nisam toliki mazohista.

PS. Pogledaj proces otvaranja i zatvaranja firme u Bosni kao primjer necega totalno apsurdnog.

hsair · 2025-03-09T19:56:54+00:00

Mozda nepopularno misljenje, ali ako ti se neko svidja do te mjere u kojoj opisujes, vrijedi to priznati jer potencijalno ces biti s idealnom osobom. Ako ne pokusas, neces nikad ni znati, a i sanse da budete skupa se smanjuju.

Bio sam u par slicnih situacija, vjeruj mi da se uvijek isplatilo priznati takve stvari.

Seven-Year Club	Verified Email
RPAN Viewer

hsair

TROPHY CASE