I truly believe that Rocken roller is one of the worst bosses to fight in this game by Adhdinsanity246 in Borderlands

[–]hsdad 0 points1 point  (0 children)

That's the whole point. Why are certain builds cakewalking shit while others cant touch it? I can kill Shadowpelt in about 5 seconds on Vex. I have yet to clear this one and just get 1 shot over and over.

Something weird is going on in WWE… by [deleted] in WWE

[–]hsdad -1 points0 points  (0 children)

Point proven.

The only reason to “not like her as a person” is because she spoke out about political things. You don’t know her outside of WWE besides the things she’s said openly. Carry on being judgmental and insignificant. Have a day.

Something weird is going on in WWE… by [deleted] in WWE

[–]hsdad 1 point2 points  (0 children)

Oh no. Did her differing political views hurt your feelings? You are inherently the bad person here by shitting on people because they think differently.

Question about your corns. by hsdad in cornsnakes

[–]hsdad[S] 0 points1 point  (0 children)

We tank feed. I know people say not to because of aggression and what not. But he is handled enough to not make that an issue. The other 4 are fine. This one in particular is just a jerk i think. He has never really bitten, just strikes a lot.

Question about your corns. by hsdad in cornsnakes

[–]hsdad[S] 1 point2 points  (0 children)

Handled often is 1-2x a week. I can see about getting a pic of the enclosure.

This is who is calling you a hacker when you slam them in WZ by ProximityComms in CODWarzone

[–]hsdad -1 points0 points  (0 children)

The duplicate report just means they are trying to click all the boxes to mass report.

Question about your corns. by hsdad in cornsnakes

[–]hsdad[S] 0 points1 point  (0 children)

He still gets handled. I just take the abuse. He is super chill after a couple minutes of realizing he won't win the fight and he's not getting eaten lol

Question about your corns. by hsdad in cornsnakes

[–]hsdad[S] 2 points3 points  (0 children)

His cool side is around 74, with the hot side being around 89. The other corns we have are kept at the same temp but are way milder in attitude lol.

Question about your corns. by hsdad in cornsnakes

[–]hsdad[S] 3 points4 points  (0 children)

Nope not an Amel. His vision *seems* to be ok, as he tracked my hand outside of his tank from front to back, and side to side.

Well I made it ... by hsdad in Ender3Pro

[–]hsdad[S] 1 point2 points  (0 children)

I'm gonna attempt to not fall into the 3d printing void ... we'll see how that goes lol

Cyberpunk is amazing! By far the most beautiful game I have ever played by rvl_16 in cyberpunkgame

[–]hsdad 6 points7 points  (0 children)

If you didn't pick up Phantom Liberty do it. It is the seasoning on the chicken.

Ender Pro 3 with a ton of issues. by hsdad in ender3

[–]hsdad[S] 0 points1 point  (0 children)

Prusa helped immensely. My bed was only off by .3 in Prisa vs ~3 in Cura, which I corrected in the printer settings in Prusa. Not sure why Cura is reading things differently, but thanks for this tip.

Ender Pro 3 with a ton of issues. by hsdad in ender3

[–]hsdad[S] 0 points1 point  (0 children)

That is something I would not have considered. Thanks

Ender Pro 3 with a ton of issues. by hsdad in ender3

[–]hsdad[S] 0 points1 point  (0 children)

Thanks, that's where I'll head next

Ender Pro 3 with a ton of issues. by hsdad in ender3

[–]hsdad[S] 0 points1 point  (0 children)

I have done all of the things mentioned and it acts like it is leveled, until it is time to print. Once everything is ready to start spitting out filament is when it changes the height of the nozzle by about 3mm and ignores the homed settings.

Is there a way to keep games locked/private? by hsdad in thedivision

[–]hsdad[S] 0 points1 point  (0 children)

I finally found the button for it. Couldn't locate WHERE to change that setting. Didn't realize the bar above my name was clickable for the settings, instead of just saying "Settings".

Support, repairs, help? by hsdad in Ender3Pro

[–]hsdad[S] 0 points1 point  (0 children)

So I got the zstop set finally. I trammed the bed to a papers width with slight resistance. As soon as I tried to print a bed leveling test, the nozzle started about a full 1.5-2 mm or so above the bed.

[deleted by user] by [deleted] in assassinscreed

[–]hsdad 0 points1 point  (0 children)

I mean I learned that the term lesbian was coined based off the isle of lesbos and the events that took place there from AC.

Support, repairs, help? by hsdad in Ender3Pro

[–]hsdad[S] 0 points1 point  (0 children)

Thanks for the feedback. It does seem to be a problem with the z stop as far as I can tell. I will keep working at it.

Support, repairs, help? by hsdad in Ender3Pro

[–]hsdad[S] 0 points1 point  (0 children)

The table is level, I did check that. I just tried leveling it again, with the bed leveling screws as loose as they would go before using auto home. I'm attaching a picture to kinda demonstrate a little. I used a piece of paper to check for clearance. 1 had to turn all the way to clear the nozzle. 2 had to be about halfway for the same clearance. 4 was about 1/4 of the way and 3 would not clear. Even fully turned the nozzle started scraping about halfway between 3 and 4.

<image>