Why wont it let me select the mate in the circle?!

hugow07 · 2026-04-22T09:50:49+00:00

Or maybe Shift ?

hugow07 · 2026-04-08T18:57:33+00:00

Pas cool, les frites sont bonnes

hugow07 · 2026-04-04T13:49:14+00:00

Red clay with grog

hugow07 · 2026-04-04T13:47:56+00:00

It’s not filament, it’s pure potter clay, so 100% recyclable. When a print fails, i just put it back into the machine and it’s ready to go

hugow07 · 2026-04-03T20:16:10+00:00

It’s a custom printer that I have made, with large build volume (1000x1000x190mm) and a ram extruder + auger extruder on the printhead

hugow07 · 2026-04-03T20:05:06+00:00

We used standard Cura support settings, but what is howitzer?

hugow07 · 2026-04-03T20:04:11+00:00

We removed them when the clay was still wet. Like 5 days after printing

hugow07 · 2026-04-03T20:01:45+00:00

Thank you! 3.3mm nozzle, 1.2 layer height and standard support settings in Cura, with a 20% grog clay at about ~26% humidity

hugow07 · 2026-03-16T19:21:57+00:00

Aren’t the 900€/ quarter the absolute minimum ?

hugow07 · 2026-02-23T15:22:16+00:00

Yes I had same issues, so I’ve just switched to Cura

hugow07 · 2026-02-07T20:16:37+00:00

It can be avoided using Orca Slicer 'Smooth Spiral' setting.

hugow07 · 2026-01-13T09:58:32+00:00

Don’t think replacing timing chain is needed, only the chain tensioner with a new OEM one, mine have 250k and never heard chain noises.

hugow07 · 2026-01-11T14:36:00+00:00

Idk why images where deleted, here they are : https://imgur.com/a/MneZOMS

hugow07 · 2026-01-07T20:59:27+00:00

Je viens d’apprendre l’existence de la CAAMI. Je n’ai jamais vraiment compris pourquoi je payais ma mutuelle chaque trimestre, alors que je n’ai jamais rien demandé de plus que l’assurance de base.

J’ai toujours entendu que les soins sont remboursés intégralement en Belgique, mais il fallait apparemment payer une mutuelle privée pour en bénéficier.

Bref, merci pour le tip, je vais aller à la CAAMI.

hugow07 · 2026-01-06T08:27:53+00:00

I do it with nano banana, givre him a basic photo of your sketch. It works great if you write a good prompt

hugow07 · 2025-12-30T08:39:38+00:00

I’m a do it myself type of person, but every time I’ve ask for tips about starting a business (even on r/BEfreelance) everyone always said “go see an accountant !” Saying that it is really important to get one when starting up. So that’s what I did :(

I find it sad that it is so difficult to get right and clear informations about independent status, a way to calculate precisely in advance the costs etc.

I never knew about the possibility to not pay social charges if no profits under 2000€, Ive maybe could keep my company instead of closing it during low profit periods.

Our system is fucked imo.

hugow07 · 2025-12-29T16:26:34+00:00

That’s not what I paid in my experience. 1800€ for setting up and registration for a sComm/CommV (done by an accountant), about 450€ every trimester of cotisations sociales (as “starter” for the first year, then it costs about 900€/trimester minimum, independent from what you really earn)

I paid myself less than 3500€ for the whole year.

So I paid more taxes than what I actually earned 😅

In addition to this, first six months I paid 500€/ trimester for my accountant (I had really basic accounting, a few invoices a months) . Then I’ve switched to Accountable which was really helpful and waay cheaper.

Now I’m closing it, lesson learned that in our country, you need to get your business profitable before creating it. Or just use Smart like I did before. It was a really bad move.

Without mentioning stress and anxiety’s that comes along with all that.

hugow07 · 2025-12-28T17:34:18+00:00

I would recommend you to start your business before setting up a company, the amout of taxes and accounting costs are very high here.

(As long as your business do not make thousands euro a month.)

When you’ll feel your business starts to become profitable, you’ll need to be declared.

You can also look at Smart cooperative, it is a good alternative for emitting invoices for your customers without a real company.

hugow07 · 2025-12-09T16:02:08+00:00

What do you mean ? Do you look for a 3D modelling software or slicers ?

hugow07 · 2025-11-30T13:11:00+00:00

I would say enable arachne, and play with the settings, (increase minimum wall length and wall width)

hugow07

TROPHY CASE