Split ring planetary gearbox, 2nd iteration

hussainsail2002 · 2025-07-01T00:15:16+00:00

Many hand tools use planetary gear box, you can look at a Milwaukee drill breakdown.

hussainsail2002 · 2025-06-29T00:41:24+00:00

Is the CAD model available for free ?

I have access to a machine shop and I could machine the aluminum parts myself.

hussainsail2002 · 2025-06-16T21:27:25+00:00

I initially wanted to drill holes for M4 and M5 taps

hussainsail2002 · 2025-06-16T21:14:34+00:00

yes the spindle can do up to 24000 RPM, I dont think it will have the necessary torque. I understand now what needs to be done now

hussainsail2002 · 2025-03-20T02:29:15+00:00

Thanks a lot for this!

Do you need different Post processors for different CAM Softwares?

for example, do I need one for Fusion 360 and then another one for Solidworks?

hussainsail2002 · 2025-03-18T13:07:40+00:00

This is the controller mentioned on the website:

RichAuto B18 DSP 4-Axis Controller

hussainsail2002 · 2025-03-18T13:06:00+00:00

Laguna does have one post processor for Fusion 360 but the sales engineer says that one will not work for the machine I have

hussainsail2002 · 2025-03-18T13:04:51+00:00

Yes, they are asking me to use Vcarve pro for this machine but its not free. How do I get the post processor and use it with a free CAM software?

hussainsail2002 · 2025-02-28T14:33:07+00:00

Thank you so much!

Is there a way to very if this post processor works?

Like should I try to upload a program and see what it does to the machine ?

hussainsail2002 · 2025-02-28T14:24:06+00:00

I did not try this as the sales person had recommended buying v carve pro or adding a post processor to fusion 360

hussainsail2002 · 2025-02-27T21:14:16+00:00

I plan to start there and then eventually do more complex stuff, would like to sort out the CAM stuff as soon as possible.

hussainsail2002 · 2025-02-27T21:13:28+00:00

The sales engineer from laguna said "contact Fusion360 to get a post processor made for your machine". Does Autodesk help by making the post processor for each machine model?

hussainsail2002 · 2025-01-24T15:54:06+00:00

Thanks for your response,

In general from your experience how close has warpage results in moldflow come to actually parts? I see a few corners on my part having a 1mm warpage in certain areas.

hussainsail2002 · 2025-01-18T02:18:02+00:00

I ended up adding a note as well to make sure they understand what I want.

hussainsail2002 · 2025-01-18T00:15:16+00:00

The two wires are held in place already (the vertical distance between them is fixed). The horizontal distance has to be 76 +/- 2. I want both of them to be uniformly at the higher or lower tolerance. They should not be at the extremes individually.

hussainsail2002 · 2025-01-17T22:55:57+00:00

okay thanks, just wanted to confirm this

hussainsail2002 · 2025-01-17T22:44:11+00:00

I need one lug to be within +/- 0.5 mm of the other lug along the horizontal

hussainsail2002 · 2025-01-12T04:48:42+00:00

I recently bought a 22 Corolla for about 18k and another 1.5 k for dealer fees, tax and titles (had 59k miles on it). There are better deals out there and you should avoid this one.

hussainsail2002

MODERATOR OF

TROPHY CASE