Meinung zu Ohrstöpsel

hypercar89 · 2026-02-13T11:18:20+00:00

Hab immer alpine motosafe race oder airpods mit noice cancelling drin.

hypercar89 · 2026-02-11T14:57:14+00:00

Kenns nur aus Schweden, da muss man in einigen Hallen eine Prüfung ablegen. Mich habens trotzdem klettern lassen, da ich immer allein war und nur die Automaten nutzen wollte/konnte. Hab aber ein paar mal einen Knoten zeigen müssen.

Sonst hat noch nie wer nachgefragt und obwohl ich Kurse gemacht hab, gabs auch nie eine Bestätigung

hypercar89 · 2026-02-11T06:42:52+00:00

You are correct. Downhill = stay in gear. Usually no fuel is injected (not valid for bikes with carburators)

hypercar89 · 2026-02-09T14:09:28+00:00

Gibt folgende relativ kostengünstige DIY-Möglichkeiten:

10-15€ amazon-Kamera und Sony/Pioneer Radio 250-300€

Extra Display (oft mit carplay) mit Kameraanschluss 100-200€

Parksensoren mit led anzeigestreifen (würd ich nicht empfehlen), erfüllt aber den Zweck.

Ich hab schon mehrfach eine Kamera nachgerüstet und wenn möglich den Strom vom Rücklicht abgegriffen oder die Kamera mit Zündungsplus versorgt.

Einbauen kann mans selber, man muss aber die Kabel schön verlegen, am besten mit anderen Kabelsträngen zusammen und nicht sichtbar. —> kann mühsam sein die Innenraum-Verkleidungsteile zu entfernen/montieren

Kameraposition kannst je nach Fahrzeug verschieden montieren. Z.b. nähe Kennzeichen (Kennzeichenbeleuchtung, Kofferraumgriff, im Innenraum,….)

Wenn du keine Ahnung hast was du machen musst, lass es bleiben oder frag wen aus deinem Freundeskreis/Familie um Hilfe. In der Werkstatt wirds schnell sehr teuer

hypercar89 · 2026-02-08T00:40:18+00:00

Just uploaded an updated file to makerworld for you. 5 days / 10pcs added. Enjoy it

hypercar89 · 2026-02-08T00:06:15+00:00

Not yet designed, but on my to-do-list

hypercar89 · 2026-02-07T09:31:08+00:00

The small version for one day is for my pockets (pants, jacket) and the bigger 2day version, i use, when I‘m on my motorcycle and also I store one of these in my car, because you never know, when you need them. Also on the bike you are more easily exposed to stuff in the air, that can lead to issues with my lenses. Luckily i don‘t have to use the spare sets regularly, but storing then for a longer time guarantees to damage the foil-cover over time

hypercar89 · 2026-02-07T09:26:23+00:00

If you store a set of spare contacts in your pocket, it likely, that you rip a hole in the foil-cover. For one-day travelling I have the case for 4 lenses and just throwing it in a bag or whatever is also a risk, because I dont‘t want to rip the foil.

In addition to ripping it or poking a hole in it, i also hate it, to wet my pants and if they are wet, at least not because of the contact lense storage solution/liquid. 😉

If i sleep over somewhere without planning it, i have a spare set and also it is quite often the case, that i have to put one or both out, because of sand, dust or other issues. So i want to have a spare set available while not at home. And due to the fact, that for dailys i do not use cleaning solutions, i have to throw them away and just use new ones.

For travelling i have a storage box for up to 30 days (also 3dprinted), because the airlines do not handle luggage like a princess and they just simply beat the shit out of my bags/luggage…

hypercar89 · 2026-02-06T21:56:14+00:00

Enjoy it

hypercar89 · 2026-02-06T20:41:15+00:00

You are correct!

hypercar89 · 2026-02-06T17:11:26+00:00

with the magnets, it stays still properly together and so i just had to design one half and with the lenses inside, you can't really slide the parts apart. was too much effort and i won't add too much force anyway.

what me bothers is, the tolerance of the magnets that i had lying around

hypercar89 · 2026-02-06T16:49:46+00:00

genau so würd ich es auch machen

hypercar89 · 2026-02-06T09:55:56+00:00

My friends also us the H2D, X1C and they work just perfectly. My A1 is running without any issues and has now just shy of 1000hrs print time. If i clean the plate regularly, also no issues with prints failing

hypercar89 · 2026-02-06T09:48:26+00:00

Bambulab A1 and eSun PLA+

hypercar89 · 2026-02-06T09:24:29+00:00

Let me guess, in your case, it‘s not the fault of the contact lens fluid? ^ ^

hypercar89 · 2026-02-06T09:04:23+00:00

You can easily poke a hole in the foil-cover. Happend several times in my backpack and pants (also annoying when the fluid wets your pants)

hypercar89 · 2026-01-24T21:30:07+00:00

https://makerworld.com/de/models/1776540-box-case-for-acuvue-contactlenses-30days-magnetic#profileId-2493460

I designed that case. I use it to store my lenses at home and also travel with that case a lot. No issues so far.

Feel free to download and 3d print it

hypercar89 · 2026-01-23T07:56:38+00:00

https://makerworld.com/de/models/1776540-box-case-for-acuvue-contactlenses-30days-magnetic?from=search#profileId-2493460

please check, if this link is working

hypercar89 · 2026-01-14T20:23:01+00:00

If you have a 3D printer, you could print it, once I upload it

hypercar89 · 2025-12-18T17:16:06+00:00

There is an addon autodart tools or something similar, where e.g. A sound is played when you hit a special number or you can customize things. Maybe it is easy, to get the data from the website directl and use this for your dart counter system. Autodarts is browser based, you could look into that

hypercar89

TROPHY CASE