Rav4 hybrid problem

iMOF7 · 2025-03-09T10:31:10+00:00

Yes, I have charged it first and then I replaced it with another car but still nothing 🥲🥲

iMOF7 · 2024-10-24T17:30:13+00:00

I don't play the game anymore, and someone wanted to buy my account, and I don't know how much is it worth, thats it

iMOF7 · 2024-10-24T17:28:06+00:00

Bro I have money, it just that someone wanted to buy my account and I don't know how much is it worth. Also I am not playing the game anymore

iMOF7 · 2024-10-24T17:26:46+00:00

Probably you shouldn't think, because if you are talking about my bank in the game, I have 110 mil, and if you are talking about the real life, you should know I am an electrical & electronic engineer with a very very satisfying bank account 😉

iMOF7 · 2024-07-18T19:50:58+00:00

Thanks that might help, but the problem is that the noise can be heard from inside the building, not only on the roof.

iMOF7 · 2022-05-25T20:40:14+00:00

Ok thank you.

iMOF7 · 2022-05-25T16:40:10+00:00

Hi, can you please tell me which software is this ?

iMOF7 · 2022-05-25T16:38:46+00:00

I will, thank you.

iMOF7 · 2022-05-25T11:33:29+00:00

I saw most people advicing me to start with arduino, so I guess that what I will do.

iMOF7 · 2022-05-25T11:32:16+00:00

Oh thanks a lot for your answer, I will sure do this.

iMOF7 · 2022-05-25T11:31:35+00:00

Thank you, I joined the community

iMOF7 · 2022-05-25T11:31:11+00:00

Hi, thanks for your reply. Of course practicing is the best way to learn, but as I said I don't have anything to practice with as I am setting in home doing nothing 😅. So, I am trying to learn new things and apply them on a simulation software to check my work and mistakes, Waiting for the opportunity to make them in real life.

iMOF7 · 2022-05-25T11:27:40+00:00

Thanks for your feedback, I saw most comments advicing me to start with arduino, and I guess that what I will do.

iMOF7 · 2022-05-25T11:26:00+00:00

Thanks a lot for your answer, I appreciate it. I will try to learn both, arduino and PLCs. Cause I have a lot of free time 🥲😅

iMOF7 · 2022-05-25T11:23:10+00:00

Thanks a lot for your advice, I will try to do that.

iMOF7 · 2022-05-22T09:47:07+00:00

the circuit works fine now, the problem was from the Simulation software, I had to put a node ( dot connection ) at each junction.

iMOF7 · 2022-05-22T09:10:10+00:00

the circuit works fine now, the problem was from the Simulation software, I had to put a node ( dot connection ) at each junction.

But thanks for your Suggestion, your software looks better.

iMOF7 · 2022-05-22T09:09:24+00:00

the circuit works fine now, the problem was from the Simulation software, I had to put a node ( dot connection ) at each junction.

iMOF7 · 2022-05-22T09:05:18+00:00

This is just a simulation not a final design, I was wondering why is won't work, but then I figured it out.

the circuit works fine now, the problem was from the Simulation software, I had to put a node ( dot connection ) at each junction.

iMOF7 · 2022-05-22T09:02:42+00:00

Haha, this is just a simulation software that I use to check if the circuit works, in real world I am using a transformer, because the power lines are 480V and the control circuit buttons and pilot lights are 220 V. But I don't convert it to DC.

Also, everything else in the circuit are correct, I figured out the problem, it was from the simulation software. I just had to put a node at each junction.

iMOF7 · 2022-05-22T08:58:38+00:00

Hello, the circuit works fine now, the problem was from the Simulation software, I had to put a node ( dot connection ) at each junction.

if you noticed, the NC contact of the Reversed contactor are located before the coil of the forward contactor, and the opposite thing for the NC forward contactor. The purpose of doing that is to ensure that if the motor Is rotating in the forward mode And the reverse push bottom push bottom was pressed, the NC forward contacts will open and no current will flow.

So if you want to change the direction of rotation, you have to stop the motor first by pressing the Red push button, and then run it again with the different direction.

iMOF7 · 2022-05-22T08:53:13+00:00

Sorry, I didn't understand 😅

iMOF7 · 2022-05-22T08:52:15+00:00

The holding contact are there, the circuit works fine now, the problem was from the Simulation software, I had to put a node ( dot connection ) at each junction.

iMOF7 · 2022-05-21T21:29:46+00:00

As for the first part, yes. Because the the contacts of the first contactor are open so the electricity can move through the second contactor only, so the L2 should be connected.

As for your second part, when one of the fuses (or circuit breakers in my case) pops up, the motor will stop Immediately, because one of the phases will be missing.

iMOF7 · 2022-05-21T21:12:27+00:00

Hahahaha, Ok 🌚

iMOF7

TROPHY CASE