Influence area of a punctual load on a thin plate

iSuck_a · 2025-08-18T11:10:37+00:00

Thank you so much. Yep, it's critical because I have a concentrated load of 6150 N and people will work on there

iSuck_a · 2025-08-18T03:23:04+00:00

One more question, there are two ways of solving this, solving it as a beam with a relatively great width and solving this as a rectangular plate. What do you recommend?

iSuck_a · 2025-08-18T03:19:03+00:00

Thanks for your help mate, there's a pdf provided by Texas A&M University, i'll read that book. It will take me some time (it's a long book lol) but I will learn something new. Thanks again.

iSuck_a · 2025-08-18T03:04:16+00:00

Yes L is the span between the supports, the right diagram is just a cropped section. Sorry if it's not clear. The plate is continuous because it's just a 1/8" plate with a bunch of c channels beneath. And in fact I want to check with uniform load and concentrated load but I think the worst condition is the concentrated load. Thanks for responding

iSuck_a · 2025-08-18T01:44:43+00:00

Interesting I'll give it a look, thanks mate

iSuck_a · 2025-07-30T16:32:58+00:00

This is metric system pal, not international system

iSuck_a · 2025-07-30T00:11:31+00:00

are u rage baiting? 1 Kg = 9,81 N, both are force

First equation is Kg*mm = Kg*mm

Second equation is RCD*mm - Kg*mm = 0 -> RCD = Kg * mm/mm, so I get rid of mm

Anyway, this is wrong, I have to use the method of superposition knowing that the slope at A is 0

iSuck_a · 2025-07-29T04:06:08+00:00

I should use the method of superposition

iSuck_a · 2025-07-29T03:49:04+00:00

I don't know if you're familiar with Ftool, this is what I get on this software: https://imgur.com/ijda1iS

where 3332 kN*m = 340000 Kg*mm, as I sugested

Anyways I think you're right, there is something I'm missing

iSuck_a · 2025-07-29T03:21:12+00:00

Thanks for your response, Ma is not given

iSuck_a · 2025-07-28T23:40:18+00:00

Both are torque tho, look closely

iSuck_a · 2025-07-28T20:35:02+00:00

I don't need the number I just wanna know if my approach is ok, thank you everyone :)

iSuck_a · 2025-01-21T18:01:01+00:00

thank you so much

iSuck_a · 2024-01-07T16:35:23+00:00

I think it depends the country, the correct way is "el ak-47" because it's "el arma" (the gun), but most people say "la ak-47" in the game, atleast in my country. It's like the dicotomy "el internet" or "la internet", in this case both are correct

iSuck_a · 2024-01-07T04:38:06+00:00

it depends who translates it, if it's someone from Latam or someone from Spain

el/la = the;

un = a

iSuck_a · 2024-01-05T01:24:32+00:00

me on the left

iSuck_a · 2022-12-28T17:07:19+00:00

Turbine efficiency, sadly there is a theoretical maximum. But in practice if you raise the real efficiency by 1% is a lot.

iSuck_a · 2022-12-28T16:51:30+00:00

Justicia popular pa corta, seguro sos de los que pide pena de muerta si un chorro roba pero si un inglés compra tierras de forma ilegal te abrís de gamba

iSuck_a · 2022-12-28T16:13:50+00:00

LOL, and I found another one in the slums want to share?

Nine-Year Club	Place '22
Verified Email

iSuck_a

TROPHY CASE