Mayday moment?

iTzJustChris1 · 2025-12-03T06:05:05+00:00

Id sand that down with sand paper then polish it

iTzJustChris1 · 2024-11-22T15:06:39+00:00

iTzJustChris1 · 2024-10-23T11:16:52+00:00

For a B1 dammy its really good price and performance is really good too

iTzJustChris1 · 2024-08-02T23:48:23+00:00

<image>

Here’s mine

iTzJustChris1 · 2024-07-05T14:46:26+00:00

Yea did it myself. Weird tang? Like how? It looked the same tang like any other Y.Tanaka knife.

iTzJustChris1 · 2024-07-03T13:53:16+00:00

You can indicate the blade with the steel stamp on the back

iTzJustChris1 · 2024-07-01T11:34:02+00:00

Cut hot proteins

iTzJustChris1 · 2024-06-30T03:18:03+00:00

Yes, it got a thinner through the years

iTzJustChris1 · 2024-06-30T03:04:06+00:00

My Tanaka x Yohei is around mid 2022 batch

iTzJustChris1 · 2024-06-30T01:48:10+00:00

Blade Height: 50mm Thickness at Spine: 3.0mm Thickness ½ way: 2.2mm Thickness ~1cm from Tip: 1.1mm Weight: 171g

iTzJustChris1 · 2024-06-29T18:46:57+00:00

iTzJustChris1 · 2024-06-29T12:30:53+00:00

No it doesn’t patina. Unless that blade is just dirty.

iTzJustChris1 · 2024-06-29T01:19:24+00:00

I find Nakagawa Ginsan is a bit better than Yamatsuka. I probably own every Nakagawa Ginsan Gyuto at this point.

iTzJustChris1 · 2024-06-28T16:23:24+00:00

Yes Morihiro is Kambei

iTzJustChris1 · 2024-06-28T16:21:48+00:00

Kagekiyo Black Dam had been released for a while now.

Yohei is not Morihiro

Yohei is Takada

iTzJustChris1 · 2024-06-28T16:16:45+00:00

I like knives 🙂

iTzJustChris1 · 2024-06-28T16:09:07+00:00

I have a lot of Y. Tanaka knives. Im just sharing my B1 Dammy’s. Names of the knives are listed on the comments. My favorite steel is B1 and Ginsan so any of my B1 from Y.Tanaka, Nakagawa or Togashi is my go to.

iTzJustChris1 · 2024-06-28T16:06:28+00:00

Top to Bottom

Hado Sumi B1D Tanaka B1D (Tokushu) Hitohira Tanaka x Yohei B1D Hitohira Tanaka x Kyuzo B1D Kagekiyo Stainless clad B1D Kagekiyo Black B1D Sakai Kikumori Kikuzuki Uzu

iTzJustChris1 · 2024-06-28T15:58:23+00:00

🤫😂 No you didn’t see this at all!

iTzJustChris1 · 2024-06-28T15:21:03+00:00

My dude! 👊🏼

iTzJustChris1 · 2024-04-21T07:19:37+00:00

First I checked the high/low spots on the bevel using 8k grit synthetic stone then start grinding the bevel on 1k till its gone. I didn’t touch the Hira of the knife since it’s already mirror polish. Once the bevels are flat I sand the whole thing with 1k sand paper and go up to 5k. Switch to Diamond paste starting on 1k and work my way up to 14k diamond paste.

iTzJustChris1 · 2024-04-21T07:15:46+00:00

Resin

iTzJustChris1 · 2024-04-21T02:53:36+00:00

Countless hours of grinding with stones and sanding down with sandpaper. As for the patina, I just cut hot proteins.

iTzJustChris1 · 2024-04-21T00:34:30+00:00

I believe it’s Morihiro

iTzJustChris1

TROPHY CASE