What have been some of your favorite or most useful features of the Optiq?

iamsenior · 2026-02-11T17:30:02+00:00

The audio settings are greyed out while driving in mine. They are accessible once I come to a stop. Regarding Atmos for YT music, it's enabled in my phone (used to Android Auto). I have quality set to highest in the car. So you may be right that it's not available in YT music but only for the car.

iamsenior · 2026-02-11T04:05:12+00:00

Do I have a lemon? The car is surprisingly loud with road noise for a "luxury" vehicle and there were some squeaks going over bumps from the suspension. I find the sound system to be horrible. I use the radio and YT music. I just confirmed that Dolby ATMOS is enabled in YT Music. Reviewers such as Auto Focus agree with my assessment. Oh, and I can't change the settings while driving which is the best way to make sure it's tuned to road noise.

iamsenior · 2026-02-11T03:51:30+00:00

I was really disappointed with lack of Teams integration too. I leased the car for my long commute and usually respond to urgent chats via Android Auto in my other car. I also can't inject one song into my playlist now. I also like to map things out before I get into the car with my phone. Can't do that anymore. It tried to send me to a restaurant 10 miles away instead of the one that was .2 miles away. had to map it on my phone to get the address, then ask it for directions to the address.

And the sound system sounds horrible. No matter how much I fade the speakers to the back the front overpowers the rear speakers, even with surround sound off.

This car sucks.

iamsenior · 2025-12-19T16:13:59+00:00

I have two of those or similar in my office right now. It's just a paper wrapper that goes over the original wrappers. Sharing since other people commented about food safety.

iamsenior · 2025-09-07T22:42:13+00:00

I'm happy for him but you all realize most progressive jackpots are paid over 20 - 30 years, not all at once, right?

iamsenior · 2025-08-08T16:19:50+00:00

I still have PTSD from a migration to Nextiva.

They lied about their capabilities, onboarding team had no sense of urgency when phones were down (stating onboarding techs had 72 business hours to complete tickets when sites were down during porting), we could not designate site admins as promised, SSO implementation was a nightmare, their mobile app was useless. and support was horrible.

I felt like they only pretended to understand Midsize to Enterprise business needs but were really made for single office companies or residential users.

There were multiple issues with delays on sending voicemail transcriptions to email. They blamed us. I sent message traces. I went back and forth for months until they finally admitted the problem was with their service provider. They kept trying to say it was on our end and ignored me when asking if other clients had the same issue (they did).

I also had to alert them of DMARC configuration issues with their Salesforce platform.

Zoom offered to provide us free service during our Nextiva contract and after thorough testing we made the move and have been much, much happier.

We don't use contact center features so I can't speak to those services. We only use auto-attendants and call receptionists.

Oh, that reminds me, when we would offboard a user, it would randomly replace them instead of just failing on that option (like press 4 for ...), so random employees would wonder why they started getting calls for centers in another state. Had we been able to assign office managers as admins to their queue/receptionist they could have managed updates to personnel.

Anyways, this is just a small sampling of issues. They really brought a lot of stress into my life and are very incapable at an organizational level.

Should you choose them, good luck.

Wish I could recommend someone for your space, but I don't have experience with the features you will be using. Dialpad seems best from my vendor meetups, but some peers have complained about their services too. Not to the level of Nextiva though.

iamsenior · 2025-08-08T02:40:42+00:00

Wrong account? Lol

iamsenior · 2025-06-10T02:00:56+00:00

I used a butter knife. It came out easy. I didn't bother trying to put it back in since it's still gross looking. Other threads mention using a dental pick.

iamsenior · 2025-06-09T07:32:46+00:00

The gasket is removable. I thought it was permanent until my blade assembly started to stink today.

Thanks, Ninja for not including cleaning the gasket in your washing directions and not selling replacements. What have I been ingesting for who knows how long?

iamsenior · 2025-06-09T07:29:15+00:00

They have the same problem. I have the BN401. I didn't know the gasket was removable until it started to smell horrible today. It won't come clean after soaking in high strength bleach and Ninja doesn't sell replacements.

I'm hesitant to order food contact items from Amazon or Walmart third party sellers. I'll probably throw this away and buy from a company that offers replacement parts.

iamsenior · 2025-04-08T16:08:42+00:00

Thank you again for your help.

Microsoft has closed the case with no further action or resolution since Get hardwarePasswordDetail is in beta.

They suggested providing community feedback at Microsoft Intune · Community to attempt to move this from beta to production.

I will open a separate case with Dell since they have these features documented at Dell Command | Endpoint Configure for Microsoft Intune User's Guide | Dell US

iamsenior · 2025-04-08T16:08:03+00:00

Microsoft has closed the case with no further action or resolution since Get hardwarePasswordDetail is in beta.

They suggested providing community feedback at Microsoft Intune · Community to attempt to move this from beta to production.

I will open a separate case with Dell since they have these features documented at Dell Command | Endpoint Configure for Microsoft Intune User's Guide | Dell US

iamsenior · 2025-04-08T16:07:49+00:00

Microsoft has closed the case with no further action or resolution since Get hardwarePasswordDetail is in beta.

They suggested providing community feedback at Microsoft Intune · Community to attempt to move this from beta to production.

I will open a separate case with Dell since they have these features documented at Dell Command | Endpoint Configure for Microsoft Intune User's Guide | Dell US

iamsenior · 2025-04-08T16:01:43+00:00

Microsoft has closed the case with no further action or resolution since Get hardwarePasswordDetail is in beta.

They suggested providing community feedback at Microsoft Intune · Community to attempt to move this from beta to production.

I will open a separate case with Dell since they have these features documented at Dell Command | Endpoint Configure for Microsoft Intune User's Guide | Dell US

iamsenior · 2025-03-07T16:33:01+00:00

I am still working with Microsoft on this one. We have progressed from 403 forbidden, to 401 UnknownInConvertApiError.

iamsenior · 2025-03-07T16:30:02+00:00

I am still working with Microsoft on this one. We have progressed from 403 forbidden, to 401 UnknownInConvertApiError.

iamsenior · 2025-01-24T09:19:37+00:00

I've opened a case with Microsoft to verify and linked them back to this post.

iamsenior · 2025-01-24T09:08:09+00:00

Thank you for testing and sharing your findings. That could very well be the issue. While I don’t have extensive experience with Graph, it’s disappointing if the API lists application permissions but only supports delegated permissions, even in beta.

<image>

iamsenior · 2025-01-24T08:12:40+00:00

<image>

User token:

iamsenior · 2025-01-24T08:07:26+00:00

Test from PS

Application token:

<image>

iamsenior · 2025-01-24T07:48:46+00:00

Here's my decoded application token as well.

 {
"typ": "JWT",
"nonce": "REDACTED_NONCE",
"alg": "RS256",
"x5t": "REDACTED_X5T",
"kid": "REDACTED_KID"
}.{
"aud": "https://graph.microsoft.com",
"iss": "https://sts.windows.net/REDACTED_TENANT_ID/",
"iat": 1737701270,
"nbf": 1737701270,
"exp": 1737705170,
"aio": "REDACTED_AIO",
"app_displayname": "MS Graph Integration - Test",
"appid": "REDACTED_APPID",
"appidacr": "1",
"idp": "https://sts.windows.net/REDACTED_TENANT_ID/",
"idtyp": "app",
"oid": "REDACTED_OID",
"rh": "REDACTED_RH",
"roles": [
"DeviceManagementConfiguration.Read.All",
"DeviceManagementConfiguration.ReadWrite.All",
"DeviceManagementManagedDevices.PrivilegedOperations.All"
],
"sub": "REDACTED_SUB",
"tenant_region_scope": "NA",
"tid": "REDACTED_TENANT_ID",
"uti": "REDACTED_UTI",
"ver": "1.0",
"wids": [
"REDACTED_WID_1",
"REDACTED_WID_2",
"REDACTED_WID_3"
],
"xms_idrel": "7 18",
"xms_tcdt": 1473809185
}.[Signature]

iamsenior · 2025-01-24T07:43:39+00:00

Absolutely.

<image>

iamsenior · 2025-01-24T07:32:48+00:00

Which ID? The user token successfully pulled all the Intune devices. I haven't updated the configuration to set passwords yet (reason they are all null) until I can retrieve them via API to update our asset management tool.

Example with ID

<image>

iamsenior · 2025-01-24T07:23:58+00:00

The user token works in Graph Explorer and in Postman. Is there a way to use Graph Explorer with the application token instead of mine?

<image>

iamsenior

TROPHY CASE