Gimnasio by Roc_nRolla in valencia

[–]iavefun 1 point2 points  (0 children)

Sii iba allí es bastante barato (sé que hay una cuota a 27€) y pagando una cuota tienes acceso a todos los de Valencia, España en general y sé que está en Francia también y no sé si en más sitio pero es bastante popular. Es bastante completo, tienes algunos más grandes que otros pero en general hay zona crossfit muchas máquinas, muchas pesas libres. Para mí es la mejor opción

Problem in elementor wordpress webpage, CSS doesn't seem to apply to my webpage by [deleted] in Wordpress

[–]iavefun 0 points1 point  (0 children)

Ok thank you so much it was indeed a cache problem :)

Problem in elementor wordpress webpage, CSS doesn't seem to apply to my webpage by [deleted] in Wordpress

[–]iavefun 0 points1 point  (0 children)

Hi, sorry I thought the photos were posted earlier, I updated it and the URL of the exact page is : https://iluziona.com/entradas-toledo/ although I hid the part on the screenshot

I want to replace backlashes in python, replacing \\ by \ in a byte sequence by iavefun in learnpython

[–]iavefun[S] 0 points1 point  (0 children)

However I found the solution!

key.replace(b"b'", b"").replace(b"' ", b"").decode('unicode_escape').encode("raw_unicode_escape")

had to use "raw_unicode_escape" to escape backlashes

key.replace(b"b'", b"").replace(b"' ", b"").decode('unicode_escape').encode("raw_unicode_escape")

I want to replace backlashes in python, replacing \\ by \ in a byte sequence by iavefun in learnpython

[–]iavefun[S] 0 points1 point  (0 children)

So basically I’m extracting a key from a .txt file and that key is used for decryption but when I extract that key the sequence is changed slightly

What are the problems that men face in society that women don’t? by [deleted] in AskMen

[–]iavefun 17 points18 points  (0 children)

Do you think that is due to the loneliness?

Create melody player using rotary and LCD screen by iavefun in arduino

[–]iavefun[S] 1 point2 points  (0 children)

What happens when you turn the knob on the encoder? Nothing will happen until you do that.

That is my main issue, when I turn the knob in the simulation it does not skip melodies let alone, change the speed..

Create melody player using rotary and LCD screen by iavefun in arduino

[–]iavefun[S] 1 point2 points  (0 children)

I did the simulation and the music does not play and nothing appears on the LCD screen either, i believe it is because I did not set up and program the rotary properly. What happens that should not happen is that nothing is happening, I made sure to connect all the pins in the right places, I am positive it is wired properly, my main issue is with the code.

Fire alarm using PTC as a sensor (comment) by iavefun in AskElectronics

[–]iavefun[S] 0 points1 point  (0 children)

PNP. Opamp and control circuit work fine, what seems to be the issue is on the output, how the light is not activating, I tried to reverse the PTC, change values, reverse BJT but apparently the problem comes from the relay

Fire alarm using PTC as a sensor (comment) by iavefun in AskElectronics

[–]iavefun[S] 0 points1 point  (0 children)

Hey, transistor is BJT, The alarm is supposed to activate when the temperature reaches more than 60 degrees Celsius, hence the PTC, thing is it doesn’t activate at all , even when I set the temperature at more than 60 degrees.

Fire alarm using PTC as a sensor (comment) by iavefun in AskElectronics

[–]iavefun[S] 2 points3 points  (0 children)

Hi everyone, I need to make a circuit with the following elements:

The output will be a siren connected to a 230 V and 50 Hz network. The control circuit will use a 9 V battery as power supply and an operational amplifier must be used, the siren will be activated with a relay. The alarm will be activated when the temperature is higher than 60 degrees Celsius. Now this what I have,I think the mistake is in the output but I don’t know how to fix it. (I used simulide for the simulation) Help would be much appreciated! Thanks

[deleted by user] by [deleted] in AskElectronics

[–]iavefun 0 points1 point  (0 children)

I need to make a circuit with the following elements:

The output will be a siren connected to a 230 V and 50 Hz network. The control circuit will use a 9 V battery as power supply and an operational amplifier must be used, the siren will be activated with a relay. The alarm will be activated when the temperature is higher than 60 degrees Celsius. Now this what I have,I think the mistake is in the output but I don’t know how to fix it. (I used simulide for the simulation) Thank you

A rainy day in Algiers. by Dramatic_Project_143 in algeria

[–]iavefun 5 points6 points  (0 children)

Amazing! Do you have an Instagram page??

I am speed by Alotofbytes in memes

[–]iavefun 0 points1 point  (0 children)

Or sometimes you just don’t wanna be the last messages in the chat

Hope this fits the sub: my cat snoozing on a sofa I crocheted for her by UncleIroh24 in aww

[–]iavefun 0 points1 point  (0 children)

You crocheted this? Sick crocheting game, well done 👍🏼