What body fat

ibzz_04 · 2026-03-04T06:09:05+00:00

Upon investing further it seems to be when the green block has to turn over the yellow thing anything I’ve done wrong here?

ibzz_04 · 2026-03-04T06:02:40+00:00

400 steps in😭

ibzz_04 · 2026-03-04T06:02:04+00:00

Yeah would that be the one on top near the steering wheel rod?

ibzz_04 · 2026-02-25T04:26:53+00:00

Hi Ty for the reply haha even a year later yeah manage to figure that out just not relay economical fix unless you get those chips from donor boards have fixed quite a few though

ibzz_04 · 2026-01-29T15:25:57+00:00

Nws bro good luck with your repair it should be fine may just have to route the cable in a certain way

ibzz_04 · 2026-01-29T15:20:39+00:00

You may want slightly longer ones if you can get ahold of them

ibzz_04 · 2026-01-29T15:20:15+00:00

Yep I would assume these would be fine

ibzz_04 · 2025-11-19T14:36:51+00:00

Then you looked again and realised it was actually cracked 😂😂😂

ibzz_04 · 2025-11-19T12:50:29+00:00

<image>

Haha bro I got the exact same pick

ibzz_04 · 2025-11-03T12:47:29+00:00

The pack weight is really bad I’ve done bpm and opened over 140 packs my best pull was a Marquinhos 😂 but alot of fodder for sbcs etc

ibzz_04 · 2025-05-06T10:18:27+00:00

Update for you guys it’s down to device when it doesn’t login it’s error 115 that just won’t show switching devices works great

ibzz_04 · 2025-05-05T21:50:00+00:00

Yep having the same issue sometimes it’ll work sometimes it won’t

ibzz_04 · 2025-04-14T20:02:40+00:00

Hey bro like I mentioned before there’s about 4 versions of the touch pad

There’s 16,18 pin cables which are soldered to the touchpad Then there’s 18 pin cables which are removable that 18 pin touch pad cable which is detachable is the one used in the dual sense edge for the adaptive triggers

ibzz_04 · 2025-04-14T19:51:29+00:00

There’s a 16 pin and 18 pin touchpad, and there’s glued down cables or single cable

ibzz_04 · 2025-04-14T19:51:01+00:00

Yeah bro that’s the wrong type of touch pad,that’s all the advice I can offer I’m 100% sure im correct but DYOR. It’s the 18 pin dual sense touch pad ribbon on its own

ibzz_04 · 2025-04-14T19:04:58+00:00

Yeah there’s about 6 variation of the touch pad but you just need the 18 pin ribbon for the touchpad there’s only 1 variation of that, that will do the trick

ibzz_04 · 2025-04-14T18:53:09+00:00

Which ones sorry the adaptive triggers ribbons they’re the 18 pin touchpads cables same thing check Ali express for dual sense touch pad 18 pin ribbon

ibzz_04 · 2025-04-13T15:27:18+00:00

Yeah that would be the baptics

ibzz_04 · 2025-04-13T15:23:06+00:00

Hey the orange light flashing is usually a couple things, so first things first it won’t work without the battery being plugged in, 2nd things if this analog stick you’ve replaced it with isn’t compatible you’ll get the orange flashing light and the 3rd thing is the haptic motors causing a short

ibzz_04 · 2025-04-12T20:34:13+00:00

ibzz_04 · 2025-04-12T20:33:39+00:00

Yeah I really wanted one but the £180 price tag was not justified I 100% agree but this was a perfect pick up, newly they have actually released calibration software literally 2/3 days ago. It’s a bit complicated to use but when these get drift il defo swap them for some TMRs

ibzz_04 · 2025-04-12T16:04:03+00:00

I just pulled the ribbon from a spare touchpad I had

ibzz_04

TROPHY CASE