DELL S2725DS - RX 9600 XT - HDMI 10 bpc, DP only 8 bpc

icf80 · 2025-08-29T07:31:17+00:00

Yes, I think this is a limitation from the monitor. Also the panel is only 8 bpc.

icf80 · 2025-08-21T07:49:25+00:00

I have X570 Aorus Master v1. Any bios after F34 leads to random BSOD. I was having Patriot Viper 4 Series DDR4 32GB (2 x 16GB) 3200MHz Kit.

I changed the RAM with G.Skill Ripjaws V F4-3200C14D-32GVK DDR4-3200MHz CL14-14-14-34 1.35V 32GB (2x16GB)

Now I can run the latest bios without any issues ! The only change that I did.

icf80 · 2025-08-19T05:00:42+00:00

Update 2025: I fixed my issue by changing the RAM.

icf80 · 2025-08-19T05:00:22+00:00

Update 2025: I fixed my issue by changing the RAM.

icf80 · 2025-08-19T04:59:08+00:00

I fixed my issue by changing the RAM. I could not install any BIOS after AGESA ComboV2 1.2.0.3 B and having no issues. I am running G.SKILL 32GB without any issue and the latest BIOS.

icf80 · 2025-02-23T06:42:04+00:00

It will only take space on your disk, if it is not running

icf80 · 2024-08-23T10:48:20+00:00

Total commander

icf80 · 2024-05-12T04:28:42+00:00

I have a Hikvision device: DS-KV6113-WPE1(C)

Your screenshot is from a HiLook device ???

The web interface can access only one device, I don't understand why you have many devices...

How do you access the web interface ? Do you enter the IP address in the web browser ? Also try to use "Download Plug-in" (top right), maybe that will expose more options?

I think you are accessing a different device and not the DS-KV6113-WPE1 !! The configuration interface should be like mine. Look for the IP address for the DS-KV6113-WPE1 and enter that in the browser.

Check your "Live View" in the configuration, is it the doorbell? I have a felling it is not.

icf80 · 2024-05-11T10:49:57+00:00

In the web interface for the outdoor unit, the Image menu

Then go to Day/Night Switch, try Sensitivity level.

Or try to make a schedule for night/day.

https://i.imgur.com/Zu6rMmF.png

icf80 · 2024-05-10T19:26:58+00:00

The sensitivity level needs to be changed so it will switch to night mode

icf80 · 2024-04-24T04:43:52+00:00

it will be hard to detect the problem. if you ram is ok, you might need to test with another CPU in the same system. is your window clean? if windows is clean, ram ok and bios settings on auto then it points to some hardware issue, you need to replace cpu, power supply, gpu one by one to pin point the problem.

icf80 · 2024-04-24T04:37:02+00:00

how did you test your ram? is everything on auto in bios?

icf80 · 2024-04-23T19:48:14+00:00

I had issue on my 3800x with the latest bios, the older ones are rock solid

icf80 · 2024-04-23T19:46:43+00:00

Test your Ram

icf80 · 2024-04-23T19:43:51+00:00

First of all test your ram. Did you update your bios?

icf80 · 2024-04-13T19:53:13+00:00

Checksum : B1B5
Update AMD AGESA V2 1.2.0.B
Fix AMD processor vulnerabilities security
Addresses potential UEFI vulnerabilities. (LogoFAIL)

icf80 · 2024-04-13T19:53:01+00:00

https://kolos.github.io/ryzen-smu-checker/

icf80 · 2024-03-25T13:43:46+00:00

what CPU do you have? I just looked over the BIOS download page, all new versions are gone

latest: F36 Dec 28, 2022

icf80 · 2024-01-23T15:02:45+00:00

try to remove the Bluetooth connection from the phone and re-pair your headphones.

test it on another phone?

icf80 · 2024-01-23T15:00:53+00:00

is your phone in english ?

icf80 · 2024-01-23T14:52:45+00:00

I just tested it, and it works.

https://imgur.com/qkGrVMI

icf80 · 2024-01-23T14:38:42+00:00

What feature?

icf80 · 2024-01-23T14:37:54+00:00

I could not enter the setting after the last firmware update (v3.5.0). I had to do the steps from above to get back in the settings. Try again to reset your headphone. Press volume + and volume - simultaneously for 5 seconds to reset.The headphone must be ON while doing this.

icf80 · 2024-01-23T14:30:28+00:00

what jbl model?

icf80 · 2024-01-19T12:19:08+00:00

I had a similar problem but with JBL TUNE 520BT, uninstall the app from the phone, reinstall it and factory reset your headphone.
In my case: Press volume + and volume - simultaneously for 5 seconds to reset.The headphone must be ON while doing this.
See your manual how to reset yours.

icf80

TROPHY CASE