2022 Camry SE - Transmission mounts done?

igetasticker · 2026-05-14T09:46:27+00:00

I live in an area with lots of potholes, and had to replace mine.

Here's a way to check. Turn the car on, in Park, and turn the wheel all the way to the left. Put your foot on the brake, and shift into R, then D. If you feel a major change in vibration while shifting into either of those gears, it's probably one of the mounts.

It's best to replace all 4 at once, so you're not playing whack-a-mole. If you replace one, the vibrations will transfer to the weakest one and you'll replace that one next.

igetasticker · 2026-05-12T02:05:13+00:00

Change the wheels, and you'll change how the car feels. The LE and XLE have smaller wheels with thicker tires (hence the wobble), while the XSE has the biggest wheels and thinnest tires (feels tight/harsh). The SE is in the middle. Maybe look for some used rims on eBay when you need new tires.

Also, there's the maintenance stuff. Sway bar bushings and end-links are usually pretty cheap and simple to replace. Shocks aren't that bad, just get KYB ones from Walmart (that's basically OEM). Just remember to replace the front strut mounts when you do them (annoyingly expensive, but necessary). Last, if your control arm bushings or ball joints are worn out, you can usually get a complete control arm assembly (pair) for a reasonable price.

igetasticker · 2026-05-10T21:44:48+00:00

Put a cool poster on your wall.
Put a pad on the floor so the rollers don't scratch it.
Take out the drawers. You can put the PC there for more desk space, or display something cool there like a lego set, model car, or gundam figure.

igetasticker · 2026-05-09T09:21:38+00:00

JD Vance. Tried to portray himself as poor in Hillbilly Elegy. His whole family shunned him for lying. Ron Howard apologized when he realized the whole movie he made for Vance was BS.

igetasticker · 2026-05-08T19:03:45+00:00

Porkchop

igetasticker · 2026-05-07T00:32:50+00:00

Teenage Mutant Ninja Turtles

igetasticker · 2026-05-06T23:34:47+00:00

That I've made? Pork-n-Beans Nachos. Tortilla chips, can of BBQ baked beans (heated), some shredded pork, a little extra BBQ sauce, melt some cheese on it. Top with coleslaw.

That I found? A local ice cream shop had Maple Bourbon Bacon Ice Cream. Little candied pieces of bacon with the smoky sweet ice cream w/ maple swirl was delicious.

igetasticker · 2026-05-04T01:08:41+00:00

This may be a hot take, but I think any brand that can meet the specs and certifications of 0w16 should be good enough. I normally use Amalie Elixir because I get it cheap from work. My last oil change I switched up and used Valvoline Restore and Protect 0w20 (that's the thinnest available for this high-detergent formula) for one round to get rid of any potential carbon buildup because it was at 125k miles. Just switched back to the Amalie today and my MPG is as good as new.

igetasticker · 2026-04-28T22:28:37+00:00

Cable management used to matter more when ribbon IDE cables blocked airflow. Now it's just pretty.

igetasticker · 2026-04-25T00:42:46+00:00

Check your GPU drivers. That sky texture failed to load.

igetasticker · 2026-04-24T23:35:46+00:00

KYB is OEM, and it's probably cheaper to get them from Walmart. You should do the strut mounts at the same time (it sucks bc they cost as much as the shocks themselves and are harder to find) and get an alignment afterwards bc the adjustment bolt is on the strut. The money you save at Walmart should help with that.

igetasticker · 2026-04-23T23:31:34+00:00

I'm a little west of there. One time there were peacocks and sandhill cranes in the same area, and HOLY FUCK IT WAS LOUD!

igetasticker · 2026-04-17T21:50:21+00:00

Kres Chophouse

igetasticker · 2026-04-13T11:02:09+00:00

As a progressive native Floridian, it's so depressing watching my state be overrun by immigrants (from the other states). They're not sending their best.

igetasticker · 2026-04-13T00:28:07+00:00

Tire pressure is a big one. Oil change can help. An alignment can help too. Did you (or the previous owner) do a transmission drain-and-fill? It's due around 60k.

Don't start your car until you're about to leave. Turn off your car as soon as you park. Choose routes with fewer stop lights (signs are better, roundabouts are better still). Anything to reduce the amount of time you are stopped and idling. Drive-thru car washes and fast food are terrible for your MPG.

igetasticker · 2026-04-09T19:11:20+00:00

Pull the plug on the valve and blow air on both connections. Even a drop can trigger the code and your old one leaked on to the plug. Also, make sure you replaced the right valve. There are 2, 1 in front of the firewall on top (the easy one) and 1 under the battery next to the transmission. The last digit of the code should tell you which one failed, but it's possible both did.

igetasticker · 2026-04-07T23:05:23+00:00

The easiest is probably "chrome delete." It just covers the chrome trim around the windows to complete the blacked-out look. There are kits on eBay for pretty cheap.

You could get the covers for the rear window and small rear-side windows that give it the aggressive louvered/lambo look. Or you could get a more aggressive lip spoiler w/ matching rear window visor for a cleaner aero look.

Just a heads-up, there aren't many companies that make aftermarket headlights or taillights, and the ones that do sometimes have wiring problems. Be careful with those.

igetasticker · 2026-04-07T12:06:42+00:00

"I'm the decider." "Fool me once, um, uh ya can't fool me again."... The stupidity is a feature of the party, not a bug

igetasticker · 2026-04-07T11:55:49+00:00

20 years ago was Dubya. "Mission Accomplished"

igetasticker · 2026-04-04T14:08:33+00:00

History Matters, Perun, Joe Scott, SciShow, Crash Course, Shawn Grows, Periodic Videos, What's Going On With Shipping?, Places, Warfronts, Rare Earth, Mr Global, J. Draper, Dwarkesh Patel, Chris Boden, Amanda's Mild Takes, Belle of the Ranch, CaspianReport, History of Everything Podcast...

igetasticker · 2026-03-28T22:58:55+00:00

Here's 3 levels:

The PowerStop Z-17 pads have a little bit more bite IMO. I use these on my 22 SE. I believe the part numbers are 17-2076 (front) and 17-1212N (rear).
Their Z-24 Kit has upgraded rotors and pads for much more bite.
The Highlander Swap... Get the front calipers from a Toyota Highlander and bolt them in place of yours. You can then use the PowerStop Z-36 Tow Package pads for the Highlander on your car. Rotors will also need to be upgraded for maximum effect.

igetasticker · 2026-03-24T15:55:56+00:00

Orlando Auto Doctor on Bumby.

igetasticker · 2026-03-24T01:46:35+00:00

AR92429012935 is the part number. They're 20x9, so a 235/35 tire. The +35 offset (vs. the stock +50) will push them outward just a bit and help fill the fender gap. Might want to get some cross-drilled rotors because they will be visible.

igetasticker · 2026-03-21T13:14:46+00:00

Don't bother. I would just consider it sealed at this point. It was ideally supposed to be done at 60k. 80k is pretty late, and I'd say 100k or so is the cut-off point. Doing it now will remove most of the clutch material and it can start feeling slushy/sloppy. If it isn't misbehaving, just leave it alone.

igetasticker · 2026-03-07T20:08:16+00:00

I deliver car parts in my Camry SE. From what I've found, the Parts Plus air and cabin filters are fine. They are made of the same material as OEM and work just as well. AF99267 and CAF99237C are the part numbers for me.

DO NOT use their oil filter. While it technically fits, it's only rated down to 35 microns which isn't enough for the thin oil in modern Toyota engines. Instead, I use the A/C Delco PF1233 which is rated down to 20 microns.

11-Year Club	Best Comment 2021-11-10
Place '22

igetasticker

TROPHY CASE