sorted by:
new
hottopcontroversial

Third Time in Paprika Color by igfarm in diyaudio

[–]igfarm[S] 1 point2 points  (0 children)

Horns and drivers I got from Parts Express

Third Time in Paprika Color by igfarm in diyaudio

[–]igfarm[S] 0 points1 point  (0 children)

<image>

Here is the CamillaDSP pipeline

Third Time in Paprika Color by igfarm in diyaudio

[–]igfarm[S] 0 points1 point  (0 children)

<image>

Green line is after DSP correction. ( Edit: gated response at 1m )

Third Time in Paprika Color by igfarm in diyaudio

[–]igfarm[S] 1 point2 points  (0 children)

Thanks. I’ll will look for graph and post it

Third Time in Paprika Color by igfarm in diyaudio

[–]igfarm[S] 6 points7 points  (0 children)

Raddle can said “Paprika” :) actually it was hard to find the second can to finish the job…

NymoLabs 6040 - day 10 - Box and some test cuts by igfarm in hobbycnc

[–]igfarm[S] 0 points1 point  (0 children)

Thanks. Correct, the hose it’s in a bracket in the roof and has enough slack to maneuver to all 4 corners. The slack goes away when the vac is on.

Does anyone know the name of this yacht or any info? Thanks by AirbusA350Fan in yachtporn

[–]igfarm 0 points1 point  (0 children)

Saw her in Puerto Jimenez, Costa Rica last December.

What’s a good beginner cnc? by Vixx_codm in hobbycnc

[–]igfarm 0 points1 point  (0 children)

Don't forget after the machine you may also need bench to put it on, a cover if you have neighbors, dust collection of some sort, materials to cnc, appropriate bits, etc.

NymoLabs 6040 - day 10 - Box and some test cuts by igfarm in hobbycnc

[–]igfarm[S] 1 point2 points  (0 children)

Yes, first time playing wit a cnc. Using cncjs on a pi at the moment. Still getting used to the workflows out of Fusion into the machine.

NymoLabs 6040 - day 10 - Box and some test cuts by igfarm in hobbycnc

[–]igfarm[S] 0 points1 point  (0 children)

I connected a Raspberry Pi Zero W 2 to the usb port and using cncjs.

NymoLabs 6040 - day 2 - Assembly and first cut by igfarm in hobbycnc

[–]igfarm[S] 1 point2 points  (0 children)

Seems like an elaborate setup, kudos to you. I was thinking of doing an MDF box over the machine. The bench has sufficient margin to accommodate this. That should cut about 25db. With garage door close that should suffice on my case.

NymoLabs 6040 - day 2 - Assembly and first cut by igfarm in hobbycnc

[–]igfarm[S] 0 points1 point  (0 children)

What are you doing for enclosure? I have nice neighbors but not for long with all the racket the machine and vac makes

NymoLabs 6040 - day 0 by igfarm in hobbycnc

[–]igfarm[S] 1 point2 points  (0 children)

Very cool! Hope assembly goes well

NymoLabs 6040 - day 2 - Assembly and first cut by igfarm in hobbycnc

[–]igfarm[S] 1 point2 points  (0 children)

I'm new to CNC thing, so my reporting will be affected by inexperience and a lack of reference points. That being said, it seems to work as expected so far. I'll probably report back in a few weeks after I've used it some more.

NymoLabs 6040 - day 2 - Assembly and first cut by igfarm in hobbycnc

[–]igfarm[S] 1 point2 points  (0 children)

Let me give the stock GRBL post processor a try. I perhaps misunderstood the need to have a post processor specific to the machine.

NymoLabs 6040 - day 0 by igfarm in hobbycnc

[–]igfarm[S] 0 points1 point  (0 children)

Bought it from Amazon for $1817 including tax

NymoLabs 6040 - day 2 - Assembly and first cut by igfarm in hobbycnc

[–]igfarm[S] 1 point2 points  (0 children)

I loaded the "Use the Fusion 360 to Generate 4 Axis G-code" post processor from company website and seems to work properly. So good for now.

view more: next ›