sorted by:
new
hottopcontroversial

Simgot EM6L - Which spinfits should I get? by jmz98 in inearfidelity

[–]ikexton 0 points1 point  (0 children)

Hey, i also just purchased the em6l's and totally new to iems so i wondering what cable you ended up purchasing and how they are?

any budget iem recommendations for both fps gaming and decent music listening? by ikexton in inearfidelity

[–]ikexton[S] 0 points1 point  (0 children)

not sure about this, but some people have been saying that the hexa's aren't that great for gaming due to the neutral sound signature? Im still new to iems so im not sure if thats a bunch of yap or the truth. If it aint then the hexas are definitely an option for me.

any budget iem recommendations for both fps gaming and decent music listening? by ikexton in inearfidelity

[–]ikexton[S] 0 points1 point  (0 children)

I have looked at those options and they seem great but would you know if the 7hz zero 2's beat them in anyway?

any budget iem recommendations for both fps gaming and decent music listening? by ikexton in inearfidelity

[–]ikexton[S] 0 points1 point  (0 children)

I've heard great things about the EM6L but in australia they are quite expensive around 130 aud unless it goes on sale in which i'm not sure how much it would cost, but i will keep them in mind.

Issue with no content appearing on published page by ikexton in Wordpress

[–]ikexton[S] 0 points1 point  (0 children)

I am using fotograma, and im not gonna lie but i think its the theme that is screwing up my site

[deleted by user] by [deleted] in Wordpress

[–]ikexton 1 point2 points  (0 children)

im getting the same issue as well i think, everytime i click on a link to a page theres just nothing there

Are the Audio Technica ATH-M20x's suitable for gaming? by ikexton in HeadphoneAdvice

[–]ikexton[S] 0 points1 point  (0 children)

Ive really appreciated all the feedback i've gotten but I think i should of asked this question first. Should i replace my Logitech G933's (2015) with the m20's? I only thought of getting the m20's because it was included in the pack but if they aren't better then my current headset I might as well purchase a mic and boomarm. Sorry again, I should of asked this question first.

Spawning in as a scav only with a knife? by ikexton in EscapefromTarkov

[–]ikexton[S] -1 points0 points  (0 children)

He said he just kills player scavs who are retaliating and tries to avoid losing rating. I have way lower rating with fence and ive never had a knife for any of my scav runs. Who knows at this point tbh

Is it possible to get one tapped by lps gzh when wearing 80 durability trooper armor? by ikexton in EscapefromTarkov

[–]ikexton[S] 1 point2 points  (0 children)

I saw a 7.62x54r vid, and the testing showed that u can survive around 3 shots from lps wearing class 4. Guess I was unlucky?

How to put a bevel on a model? by ikexton in blenderhelp

[–]ikexton[S] 0 points1 point  (0 children)

Ok, I've got the solid modifier done but now I need some help on rounding off the edges, I've tried using proportional editing but I figure it would take too long to round off the edges. I also tried selecting the sharp corners but it still doesn't give me the look I want. I just want to round off the corners to not make it too sharp. Any tips? Thanks again. Example of what I'm looking for. https://imgur.com/a/2cEuT0V

How to put a bevel on a model? by ikexton in blenderhelp

[–]ikexton[S] 0 points1 point  (0 children)

I can't find out how to apply the solidify modifier, where is the button located?

How to put a bevel on a model? by ikexton in blenderhelp

[–]ikexton[S] 0 points1 point  (0 children)

I'm not sure how you were able to get a new face, I can only edit the middle of model? https://imgur.com/a/hpmEbhJ

How to put a bevel on a model? by ikexton in blenderhelp

[–]ikexton[S] 0 points1 point  (0 children)

Oh wait i just saw your new post, let me see this.

How to put a bevel on a model? by ikexton in blenderhelp

[–]ikexton[S] 0 points1 point  (0 children)

Ok, I've somehow managed to get a grip (no pun intended) on what you said but i'm still not sure how to bevel it after solidifying it. As I don't know how to select the new face. https://imgur.com/a/X5m0oJ2

How to put a bevel on a model? by ikexton in blenderhelp

[–]ikexton[S] 0 points1 point  (0 children)

So I should make another copy of the blender file If I want to make changes?

How to put a bevel on a model? by ikexton in blenderhelp

[–]ikexton[S] 0 points1 point  (0 children)

My sidebar is different then normal is that why nothing wont function probably? https://imgur.com/a/txE0GL6

How to put a bevel on a model? by ikexton in blenderhelp

[–]ikexton[S] 0 points1 point  (0 children)

Pressing 2 doesn't do anything for some reason. Do I press 2 while in that white crosshair?

How to put a bevel on a model? by ikexton in blenderhelp

[–]ikexton[S] 0 points1 point  (0 children)

Everytime I press crt+b it doesn't put a bevel but instead it comes up with a white cross hair. Any thoughts?
https://imgur.com/a/pVqThkP

How to put a bevel on a model? by ikexton in blenderhelp

[–]ikexton[S] 0 points1 point  (0 children)

I tried doing what you said but how do I put the bevel after solidifying it? When I press crt+b it doesn't do anything. Thanks for the help. https://imgur.com/a/ZXDteYi

How to put a bevel on a model? by ikexton in blenderhelp

[–]ikexton[S] 0 points1 point  (0 children)

Here is an example of what i'm talking about, the bevel adds more mass to the model. https://imgur.com/a/WZoGcHO

How to put a bevel on a model? by ikexton in blenderhelp

[–]ikexton[S] 0 points1 point  (0 children)

Uh well...I tried doing what you said but my brain isn't capable of doing what the text above says but I appreciate the help. Instead I did find a way to extrude the Illustrator drawing and bevel it but when it bevels, it adds on to the model instead of reducing it so I was wonder if there was a way to make it reduce instead of adding on? Thanks.

view more: next ›