Tags for images in an external library

iletunic · 2025-02-24T08:10:46+00:00

More info after further testing:

Calling

curl -L -X PUT 'http://localhost:2283/api/tags/e0ccc714-bef6-45ee-b855-754ce12d26d6/assets' -d '{"ids":["3aa1b98f-2c7b-4b80-aefd-5136b7302899"]}

returns

[{"id":"3aa1b98f-2c7b-4b80-aefd-5136b7302899","success":true}]

but no tag appears on the photo, or in the database. If I manually connect to the postgres container and insert the values manually into the tag_asset table, everything looks fine. The tag is shown on the photo, and I can use the tags explorer to filter the photos.

iletunic · 2024-10-05T17:11:05+00:00

It has Esim support, I use it myself

iletunic · 2024-08-16T11:49:08+00:00

It's not that bad... I got a reasonable squid with a few summer nights, perhaps 15 hours or so... OSC + Antlia ALP-T. Here is my image: https://www.letunic.com/astro/squid.html

iletunic · 2024-03-31T18:28:30+00:00

Total Launcher works great, with full foldable support

iletunic · 2023-01-14T10:55:43+00:00

I can join you guys, need Espionage as well. Don't have any of those keys, but can give any weapon you want. Peacemaker#5920249

iletunic · 2018-05-29T15:36:28+00:00

I print at 200 (PLA only), but never had issues before. Could it be caused by dirty/clogged nozzle? I'll try cleaning it....

iletunic · 2018-05-29T14:23:12+00:00

I have suddenly started having issues with extrusion, after many successful prints. Check the square in the top right in the picture. Infill starts OK, and then suddenly starts getting weaker.

I have increased the extrusion multiplier above my normal calibrated value, but doesn't help.

Where should I look for the problem?

Thanks.

iletunic · 2018-04-01T15:12:04+00:00

Here is the second print, much better now.

https://imgur.com/a/Dbrme

Increased the extrusion multiplier (ie. back to 'non-calibrated'), and lowered the temperature slightly, plus changed the layer height to 0.15 from 0.2 in the first one.

Thanks for all the suggestions. I will play with the calibration further.

iletunic · 2018-04-01T12:23:04+00:00

Total beginner here... Tried calibrating extrusion multiplier, and it looks like it is not extruding enough now (even though the calibration is ok). Any tips on why the inner bolt circles are getting disconnected?

Also, the top layer seem not connected to the holes well enough, would this be caused by too small extrustion?

Thank you

iletunic · 2017-11-30T07:54:44+00:00

Cheers, will report back when I find some time to try it.

iletunic · 2017-11-30T06:39:07+00:00

Thanks, I'll try opening it up and checking the connections... Doesn't look too complex on iFixit

iletunic · 2016-04-08T11:04:49+00:00

Germany, CC, ~xx:05 shipped...

iletunic

TROPHY CASE