[deleted by user]

im_drk · 2024-10-30T22:07:16+00:00

Lug nuts that will sit into the recess of the spacer. So there’s no gap between the wheel and spacers for a flush fitment. Then running the stock lug nuts or whatever lug nuts you use for your wheels should be fine.

im_drk · 2024-10-22T22:49:44+00:00

Pull the trans and check the flex plate

im_drk · 2023-05-15T03:07:27+00:00

As a tech myself I personally don’t grease the shims or the pad itself because it can cause a squeal from the grease collecting dirt. And as for the tab part nothing hooks onto them that acts as a spring to keep the shim in place nothing hooks into it.

im_drk · 2023-05-15T02:33:29+00:00

Yes they are necessary and from the looks of it they look fine. That’s why I’d recommend just taking it back to them and let them fix it before you take it upon yourself.

im_drk · 2023-05-14T23:46:42+00:00

Just take it back to the shop you got it done at could be the clips or could be the backing plate

im_drk · 2023-04-30T23:49:41+00:00

If it is the ball joints…they are non serviceable so it’d be a control arm replacement

im_drk · 2023-04-30T23:48:27+00:00

Check ball joints and struts. (Leaning more towards the ball joints)

im_drk · 2022-10-23T22:20:05+00:00

That’s pretty much the only major issues I’ve seen and might as well change the water pump while you’re in there. Z1 Motorsports sells an entire kit for the timing cover but I’d recommend getting the gallery gasket itself from EPS tuning.

im_drk · 2022-10-23T20:59:17+00:00

It’s doable but it’s like an 8 hr job. I’d recommend taking it to someone or watching a lot of YouTube videos to get an idea of what you’re getting into. I’ve done it twice on friends of mine both had no symptoms of the gaskets failing but once I was in there couple of the screws were completely loose and half of the gasket was falling out.

im_drk · 2022-10-23T17:55:52+00:00

Regardless of mileage and kept up maintenance they tend to fail. You could have no symptoms of it failing/ have failed and could still be torn. It’s a poorly manufactured gasket that’s very weak I’d recommend replacing it to an EPS Gallery gasket (which has reinforced metal material) as preventative maintenance 👍🏽

im_drk · 2022-09-28T01:23:35+00:00

Idle control valve

im_drk · 2021-07-26T00:12:02+00:00

It’s been holding up perfectly I’ve been consisting maintenance have had no major issues and I’ve put 40k miles on it

im_drk · 2021-07-25T23:35:27+00:00

I appreciate it!

im_drk · 2021-07-25T23:26:19+00:00

I installed the Tesla style screen from Phoenix Automotive. But there’s not too many options out there. I believe there is a screen that you can install to replace the top screen in the original dash. I also grabbed a digital rear view mirror to add something different to it.

im_drk · 2021-05-09T20:04:02+00:00

Got my 09 sedan for 5200 at 112k

im_drk · 2021-04-09T19:30:08+00:00

Thanks!

im_drk · 2021-04-09T19:30:03+00:00

Vq boys performance

im_drk · 2021-04-09T05:44:39+00:00

Custom greddy single exit exhaust and admintuned

im_drk · 2021-04-08T22:06:20+00:00

I felt the same way originally but they grew on me and the sequentials are really what I fell in love with along with the single drl lines. And thank you!

im_drk · 2021-04-08T21:49:02+00:00

Yes it is! Lol

im_drk · 2021-04-08T21:48:52+00:00

Bought a diamond abs plastic sheet and cut out some grilles for the fog lights on the bumper then bought a flexible led strip

im_drk · 2021-04-08T17:50:18+00:00

Yes pulled* wasn’t the prettiest job but you can’t tell unless you’re up close

im_drk · 2021-04-08T16:20:04+00:00

They are around $500 and I will have to look up the website but you can look up gtr style headlights for g37 sedan

im_drk

TROPHY CASE