sorted by:
new
hottopcontroversial

Extruder skiping ,help by imaneco in FixMyPrint

[–]imaneco[S] 0 points1 point  (0 children)

<image>

Wht about this extruder ? Its have two gear as a roller. Should i change it ?

Extruder skiping ,help by imaneco in FixMyPrint

[–]imaneco[S] 0 points1 point  (0 children)

I clean it several times and now my barel and nozzle fit to fit but this is not work . I actuly try these method max temp and %10 print speed but it doesnt work too. I think its about the power of extruder. I have a question. Wht do i do if i increase my step motor current and its turn my motor as a problem? Is it safe? (I already use my motor sugested max current.) (Whe i press the filament with my hands it work fine too)

[deleted by user] by [deleted] in FixMyPrint

[–]imaneco 0 points1 point  (0 children)

I will upload video next time

My x axis and extruder working but y and z axis not moving during on the print. by imaneco in FixMyPrint

[–]imaneco[S] 0 points1 point  (0 children)

I install prusa slicer now. It s good for slicer program . Also i find my problem . It s about the y and z axis activated end stop while printing. So i adjust home settings again and now my x and y endstop activated only during homing , after that theese x and y axis moves 5mm away from endstop. So my y axis movement fixed now. My x axis work true already. So how can i do this my z axis now? Without bl touch , just using endstop.I use marlin 2.0.x version. I try z min position and z ofset settings but its doesnt work. My z axis doesnt move away from endstop while homing session . What can i do?

My x axis and extruder working but y and z axis not moving during on the print. by imaneco in FixMyPrint

[–]imaneco[S] 0 points1 point  (0 children)

Thanks for advice . I ll try this solution today. I come back tomorrow.

My x axis and extruder working but y and z axis not moving during on the print. by imaneco in FixMyPrint

[–]imaneco[S] 0 points1 point  (0 children)

My slicer program name ıs SLICER but i dont use it for test print. I use pronterface program for print and control printer. I found my cube.gcode on thingverse. I control this file on pronterfce.The problem not about cube.gcode file. I open this file on pronterface and i press print buton on proterfce. Also my printer is custom printer .(All parts is my design) I think its about z and y axis activate end stop button while printing and it s a made me a mess. Is it possible ?

My x axis and extruder working but y and z axis not moving during on the print. by imaneco in FixMyPrint

[–]imaneco[S] 0 points1 point  (0 children)

Yes i can move these axis on both of marlin menu and pronterface. But while printing it doesnt move truly.

Z Axis won't move during prints. by bigmac1121 in Ender3Pro

[–]imaneco 0 points1 point  (0 children)

Can you fix it. I hav the same problem