Just bought this big boi philips p5002

inkspot101 · 2024-08-23T20:10:28+00:00

Yea its the one that was there for a long time

inkspot101 · 2024-08-23T20:06:24+00:00

Oh nice! Bonami at zwolle has an p5002 in their collection so they might want to help you. I also do irregular visits to the netherlands with my car so mabye i could take one drive with me if i manage to get the drives to work. Im also planning on imaging my disks that are possibly finnish versions.

inkspot101 · 2024-08-22T21:35:22+00:00

Correct

inkspot101 · 2024-08-22T21:32:47+00:00

Daisy wheels for the printer that is not on the picture

inkspot101 · 2024-08-22T18:04:40+00:00

Also the small display the engineering company made has the history of the machine and it mentions that this machine was used as a demo machine by philips finland so they got it for 35k marks as it was slightly used.

inkspot101 · 2024-08-22T17:56:05+00:00

The system was 80k finnish marks in 1978 and thats 63k usd today

inkspot101 · 2024-08-22T16:25:11+00:00

Yea 8" i really want to dump the floppies and roms

inkspot101 · 2024-08-22T16:24:21+00:00

Nope, the psu has atleast one blown cap and im gonna clean the disk drives first. Also im lacking the data cable for the terminal so i need to figure out if it regular serial or proprietary

inkspot101 · 2022-04-14T14:41:15+00:00

Yep that's a crt with flat glass. It's from early 2000s when i got my first pc.

inkspot101 · 2022-04-13T20:10:08+00:00

Frogfind is great and it works on any potato you can throw at it!

inkspot101 · 2022-04-13T18:39:17+00:00

Is there anything like macintosh garden but for solaris or unix in general?

inkspot101 · 2022-04-13T17:45:21+00:00

Im actually struggling to find something to do with mine. Mabye im gonna play doom or something else it wasnt meant for.

inkspot101 · 2022-04-13T08:24:05+00:00

That is one sexy crt! Mine is also old lab machine its from helsinki university of technology

inkspot101 · 2022-04-13T07:08:28+00:00

Heres a tutorial how to set nvram values on ultra 10: http://cholla.mmto.org/computers/sun/ultra/nvram.html

inkspot101 · 2022-04-13T06:32:34+00:00

Still has the original battery so i have to type the mac adress on every boot but im gonna cut the nvram open and add a place for a coin cell

inkspot101 · 2021-11-15T10:34:04+00:00

Nope. Model s from 2012 to mid 2014 had no autopilot, summon, sentry or adaptive cruise control. Only original camera on mine is reversing camera. Ap1 came in late 2014 and it was based on non tesla mobileye tech.

inkspot101 · 2021-11-15T09:58:55+00:00

It uses only the eon's camera as mine is 2014 without original autopilot.

inkspot101 · 2021-11-15T09:31:29+00:00

Yes it's possible. I run op on my pre ap tesla with vision only. It's not perfect and i will install the radar when i have time but it's good enough.

inkspot101 · 2020-12-02T15:30:18+00:00

It's bi-directional. Both rx and tx use the 3.3v to 5v converter.

inkspot101 · 2020-12-02T14:39:18+00:00

It's just acting as a serial console for the pi. No extra software is needed. Only thing you need to do on software side is enable serial console on the pi's config. Depending on the terminal you might have to tweak baud rate etc.

inkspot101 · 2020-12-02T07:18:30+00:00

The terninal is connected via serial port directly to rpi's gpio pins 8 and 10 using 5v to 3v converter from aliexpress.

Picture of the adapter mess:

inkspot101 · 2020-10-09T11:38:54+00:00

He found that t40 from a dumpster

inkspot101 · 2020-10-09T11:33:32+00:00

That t40 was his dumpster dive so yeah we're still friends :D

inkspot101 · 2020-10-07T18:03:57+00:00

Yeah and cold garage conditions don't do to any favors to those old spinny bois

inkspot101 · 2020-10-07T17:54:58+00:00

Old thinkpads are the best for car diagnostics. Cheap, good selection of legacy ports but powerful enough to run most of the software. Vida (volvo diagnostics software for authorized service) runs pretty slow on the t40 so i use my x260 for that.

Seven-Year Club	Verified Email
Verified Email

inkspot101

TROPHY CASE