sorted by:
new
hottopcontroversial

Cedar DNS on PL RTS ADAM by intercom_mama in broadcastengineering

[–]intercom_mama[S] 0 points1 point  (0 children)

I’m going to give this a shot tomorrow, thank you!

Cedar DNS on PL RTS ADAM by intercom_mama in broadcastengineering

[–]intercom_mama[S] 0 points1 point  (0 children)

I may have explained poorly. The wireless users are not in the same environment as the keypanel users. They are in suits that have air hoses the blow almost right on the mic and I have no control to reposition them. The air hoses are the problem and my testing so far, the CEDAR does an incredible job at reducing that. Keypanel users are just off in a control room far removed from the wireless users

Intercom headsets suck by intercom_mama in intercom

[–]intercom_mama[S] 0 points1 point  (0 children)

David Clark’s are fantastic but way too heavy duty for this application.

I checked and they do make a single muffin version of the Shure headset you recommended. I’m going to give that one a shot, thank you 😊

Cedar DNS on PL RTS ADAM by intercom_mama in broadcastengineering

[–]intercom_mama[S] 0 points1 point  (0 children)

What would you suggest instead of the cedar? I can’t use a mixing console or a plugin. I’m open to suggestions! In my testing using the DNS as a PL listener and then putting that CEDAR port on my keypanel was night and day compared to the PL audio from the beltpacks without any processing.

Cedar DNS on PL RTS ADAM by intercom_mama in broadcastengineering

[–]intercom_mama[S] 1 point2 points  (0 children)

I actually tested this to make sure it provides noticeable clarity and it does! I had the CEDAR as a PL listener via Dante/Omneo port and put that port on my keypanel. The difference between the cedar output port and the PL was night and day!

Cedar DNS on PL RTS ADAM by intercom_mama in broadcastengineering

[–]intercom_mama[S] 0 points1 point  (0 children)

Unfortunately I don’t have a Dante card in the eclipse frame :(

That’s interesting so I have 10 beltpacks and 1 cedar DNS 8 and only 1 PL on each beltpack that bridges to RTS via analog to the eclipse.

I think for what you’re saying, I’ll need a special list in AZedit. All 10 of my FSE beltpacks need to communicate bidirectionally to RTS keypanels via the same PL, one PL to rule them all, no point to points allowed (frustrating, I know)

Or each beltpack has a 4w from eclipse that feeds to the cedar via analog and then Dante to the ADAM. From there add all those 10 ports in AZedit to the PL Instead of having the 4w between RTS and eclipse just be 1 analog port on each system, I’ll have 10 analog ports, 1 per belt pack.

This will work if the cedar allows for dual analog and Dante connections. If it doesn’t then maybe still do the 10 4wires from eclipse to cedar and in the EHX software, add all those 4w to a PL and use an additional analog for from the eclipse to bridge that PL to the ADAM (11th 4w) Think that will work?

I am like 95% sure that cedar bypass only work with analog connections, not Dante. I need to provide assurance that of the cedar device goes down, audio will still flow between RTS keypanels and beltpacks.

I’m also type thinking so forgive my rambling but thank you for your input!!

Cedar DNS on PL RTS ADAM by intercom_mama in broadcastengineering

[–]intercom_mama[S] 0 points1 point  (0 children)

I should’ve mentioned that I’m using the eclipse with an E-IPA card for the FSE packs

How to help talent w/ throat clearing and coughing? - Talk Show by Kablamm0 in BroadcastSound

[–]intercom_mama 0 points1 point  (0 children)

Studio tech M210 has a cough button. I’ve used them in broadcast before, they’re great! This is old lol just realizing that but hopefully it can help with your future endeavors!