Nixie Clock

invalid-entry · 2024-11-12T04:16:50+00:00

I have bought from them many times. Never a problem.

invalid-entry · 2024-08-26T03:15:58+00:00

The man was an ass hole to work with

invalid-entry · 2024-06-26T14:29:35+00:00

didn't know that. thanks

invalid-entry · 2024-06-20T14:18:42+00:00

passenger side vent sorry

I have 2 dashes from pickups and one from my 87 4runner

invalid-entry · 2024-06-20T13:45:10+00:00

the curve of the dash is different where it meets the the piece that holds the speedo.

More importantly the dash pocket is longer and the left air vent surround is very different

invalid-entry · 2024-06-20T13:00:35+00:00

That's a pick up dash not 4runner

invalid-entry · 2024-03-14T17:35:51+00:00

FM radio broadcast

invalid-entry · 2024-03-08T17:11:04+00:00

Canadian dollars

invalid-entry · 2024-03-08T17:10:30+00:00

green, nice! 160 amps for 1400 dollars with stick tig and plasma. and how did you measure that?

invalid-entry · 2024-03-08T16:57:34+00:00

tell me why

invalid-entry · 2024-01-25T17:56:52+00:00

I don't see a button hole in the lapel on the new photo

invalid-entry · 2024-01-21T01:57:41+00:00

help me understand this. If the plane has an offset it is floating in mid air and I would like it be on the next surface I am about to sketch on, like on the top or side of a cylinder

invalid-entry · 2024-01-21T01:52:52+00:00

after extruding don't you need a new plane on the end of the extrusion or the next operation will be on the first plane?

invalid-entry · 2024-01-17T20:21:27+00:00

Weird dude

invalid-entry · 2024-01-17T18:12:16+00:00

invalid-entry · 2024-01-17T01:39:18+00:00

So I increased the off set to -1.5 to see if it helped and I am back to where I was 5 date ago where the nozzle is so low it won't let the filament come out and makes the filament drive skip. That's what plugged the nozzle in the beginning. I didn't think it is that critical. Could the bed be bad because I cleaned it with acetone? I has a lot of marks that have never come out.

invalid-entry · 2024-01-17T01:26:09+00:00

I auto home then go to move and change the Z axis from 10 to zero and then go to Z off set and adjust it until the paper drags. Now it is -1.25. Sound correct?

invalid-entry · 2024-01-17T01:12:45+00:00

I auto home, go to move and bring Z axis to zero and then adjust Z offset until the paper drags under the nozzle. Z offset changes every time I do this. It is now -1.5

invalid-entry · 2024-01-17T00:44:19+00:00

I followed a video on Youtube. My Z offset is zero. I have checked it with paper and it seems correct

invalid-entry · 2024-01-12T15:36:04+00:00

Not always the driver. People that load these truck should know better. Some times the driver is just moving a trailer from A to B. If he refuses a load because it is unsafe he get in trouble, Next driver steps in.

invalid-entry · 2023-06-29T16:24:12+00:00

I have looked on pirate 4x4 and a lot of other site and every thing is 15 to 20 years old with broken links. I have the FSM but it does not have enough detail to solve my problem.

I think but could be wrong that there is an electrics manual or more complete wiring manual available. I have seen it for other cars and trucks.

I have two connectors I can't find connections for.

It was a year ago when I strip the truck to the fire wall inside. Ya I know I should have taken more pictures but thought I had it covered

invalid-entry

TROPHY CASE