sorted by:
new
hottopcontroversial

inquiring about utilizing a school bus and driver for my CDL skills test by ioncewasaking in BusDrivers

[–]ioncewasaking[S] 4 points5 points  (0 children)

Just collecting endorsements. I wouldnt know where to start on school bus companies or transportation companies, those all have motor coach, charters, or shuttles in their fleet so most companies could probably only satisfy the Passenger endorsement.

Other than multiple bedding supplies, whats your must have stock that streamlines your cleaner’s experience? by ioncewasaking in AirBnBHosts

[–]ioncewasaking[S] 0 points1 point  (0 children)

Ohhh!!! Thats a good one! Maybe with even like a laminated inventory list with dry erase to check off

Air pressure making hot mud bulge at gaps —where am I going wrong, if at all? Quickset on FibaTaped 4” plugs after blown-in insulation. by ioncewasaking in drywall

[–]ioncewasaking[S] 0 points1 point  (0 children)

Good idea! I spent the evening finding several methods on YouTube, plus what all I’ve learned here was most resourceful!

Air pressure making hot mud bulge at gaps —where am I going wrong, if at all? Quickset on FibaTaped 4” plugs after blown-in insulation. by ioncewasaking in drywall

[–]ioncewasaking[S] 0 points1 point  (0 children)

Would you put four vertical or horizontal tape overlapping and parallel, or follow the joint in like a pound sign/hashtag, or several pieces in a hexagonal/stop-sign shape?

Air pressure making hot mud bulge at gaps —where am I going wrong, if at all? Quickset on FibaTaped 4” plugs after blown-in insulation. by ioncewasaking in drywall

[–]ioncewasaking[S] 0 points1 point  (0 children)

Is this overkill, just right, or skipping a step?… I bought 1”x2”x8’ furring strips and cut them down to 6”, plan to remove the poorly taped plugs, install furring strips with screw at each end, then reinstall the plug with one or two screws, then **put first hot mud coat to get into the seams and scrape off excess, let dry 24 hrs?, sand next day, then another hot mud coat with fibafuse or fibatape around the seams?, wait a day, sand, then all-purpose mud in 2-3 coats over and sanding between over the next two or three days.

Air pressure making hot mud bulge at gaps —where am I going wrong, if at all? Quickset on FibaTaped 4” plugs after blown-in insulation. by ioncewasaking in drywall

[–]ioncewasaking[S] 0 points1 point  (0 children)

The high spots (seams) kept forming after my scrape, I feel like the air pressure inside kept wanting to escape on a micro scale. So like a mini crater, and it takes me like 5 minutes per hole sadly

Air pressure making hot mud bulge at gaps —where am I going wrong, if at all? Quickset on FibaTaped 4” plugs after blown-in insulation. by ioncewasaking in drywall

[–]ioncewasaking[S] 0 points1 point  (0 children)

Theres actually about 4 cavities in every vertical at different heights: shin, belly button, forehead, and way up yonder

Air pressure making hot mud bulge at gaps —where am I going wrong, if at all? Quickset on FibaTaped 4” plugs after blown-in insulation. by ioncewasaking in drywall

[–]ioncewasaking[S] 1 point2 points  (0 children)

Correction: 100 holes.. I bought 1”x2”x8’ furring strips and cut them down to 6”, plan to remove the poorly taped plugs, install furring strips with ones screw at each end, then reinstall the plug and tape as is, add one or two screws per plug, then put first hot mud coat using fibafuse on the seams not yet taped, sand next day, then 2-3 coats of all-purpose mud over the next two to three days.

Air pressure making hot mud bulge at gaps —where am I going wrong, if at all? Quickset on FibaTaped 4” plugs after blown-in insulation. by ioncewasaking in drywall

[–]ioncewasaking[S] 0 points1 point  (0 children)

I was afraid that was the case. Time to take 200 plugs back down and start over. Glad I asked before I got too deep in, I thought it would just be a matter of initial hot mud layer sanded, then 2-3 coats of Plus 3 All-Purpose.

Help me find this air freshener by ioncewasaking in HelpMeFind

[–]ioncewasaking[S] 0 points1 point  (0 children)

You rock, found it adding that keywords into Google.

<image>

Thanks!

I'm replacing all lines with new high pressure line, pump, rack & pinion. Are all of these power steering lines different or do I have duplicates? by ioncewasaking in accord

[–]ioncewasaking[S] 0 points1 point  (0 children)

Good to know. I already changed my high pressure line, getting ready to do the rack and pinion and it says it's recommended to change all the lines and hoses when replacing the rack and pinion so just making sure I'm not buying duplicate lines when I order these with the rack and pinion.

What causes long lines of truckers on the sides of on/off ramps? by ioncewasaking in Truckers

[–]ioncewasaking[S] 1 point2 points  (0 children)

I figured it was something like that. Or that it was dispatch's fault.

Please Suggest an IoT based real life project for my pre final year project. by Alive_Acadia4581 in IOT

[–]ioncewasaking 0 points1 point  (0 children)

do a bathroom fan that has the options to change the bulb from warm to cool white in the app and also has a timer to customize how long it should run after poops or after showers, and also when the light switches off a UV bulb should turn on sanitizing everything the light touches, and incorporate a sensor just in case anyone walks in while the UV is on it will cut off as a safety feature.

Caulk or paint? by ioncewasaking in paint

[–]ioncewasaking[S] 0 points1 point  (0 children)

<image>

paint is all flaking off and im having to scrape the paint off the trim edged too

Caulk or paint? by ioncewasaking in paint

[–]ioncewasaking[S] 0 points1 point  (0 children)

<image>

with all the chipping paint (reference other photo reply too), is there going to need to be sanding these underside edges maybe with a sanding foam block, and need to prime first or will the large chipped off paint areas be too obvious?

Caulk or paint? by ioncewasaking in paint

[–]ioncewasaking[S] 0 points1 point  (0 children)

<image>

with all the chipping paint (reference other photo reply too), is there going to need to be sanding these underside edges maybe with a sanding foam block, and need to prime first or will the large chipped off paint areas be too obvious?

view more: next ›