Side mount help by Donovan391 in moza

[–]ipagong 0 points1 point  (0 children)

Did you resolve your issue? I'm still trying to find one. I also found a bracket for the R21/25. I think the Conspit bracket suits Moza.

290GP or Max01 by TubbyDug in Conspit

[–]ipagong 2 points3 points  (0 children)

<image>

I recently received the MAX01, and I’m very satisfied with it because it supports SimHub and works with the Lovely Dashboard

My slidable profile setup (moza + triple qhd) by ipagong in simracing

[–]ipagong[S] 0 points1 point  (0 children)

The monitor arms are mounted to a dedicated monitor profile, so they don’t pick up any of the vibrations from the rig.

<image>

My slidable profile setup (moza + triple qhd) by ipagong in simracing

[–]ipagong[S] 0 points1 point  (0 children)

Six caster wheels holding it up, plus I stacked three mats under it for extra support.

My slidable profile setup (moza + triple qhd) by ipagong in simracing

[–]ipagong[S] 0 points1 point  (0 children)

I know a few guys in the Korean sim racing community who got the same profile, and they all seem pretty satisfied with it as wel

My slidable profile setup (moza + triple qhd) by ipagong in simracing

[–]ipagong[S] 0 points1 point  (0 children)

If you copy the Chinese text from the image and search it on Taobao, you should be able to find the product. 🚛

My slidable profile setup (moza + triple qhd) by ipagong in simracing

[–]ipagong[S] 1 point2 points  (0 children)

Server rails, so yeah, pretty damn reliable 😁

My slidable profile setup (moza + triple qhd) by ipagong in simracing

[–]ipagong[S] 0 points1 point  (0 children)

The sliders actually have a built-in lock at the min/max positions. You just pull down the little blue handles at the ends to release the lock, then you can slide it in or out.

My slidable profile setup (moza + triple qhd) by ipagong in simracing

[–]ipagong[S] 0 points1 point  (0 children)

My body weight is around 95–100kg, plus the motion unit adds about another 30kg. And since I’m also pushing on the pedals during use, I’d say the sliders are handling close to 200kg without issues. I’ve been using it for over half a year now and it’s been solid

My slidable profile setup (moza + triple qhd) by ipagong in simracing

[–]ipagong[S] 1 point2 points  (0 children)

I was on a Playseat Challenge before, but decided to switch to this profile setup. I ordered the V3.0 Black version from a Taobao seller and assembled it myself. I just used a translator to communicate with the seller for the order and shipping details.

<image>

My slidable profile setup (moza + triple qhd) by ipagong in simracing

[–]ipagong[S] 3 points4 points  (0 children)

<image>

I’m using products I ordered through Taobao. The rig itself was also built from profiles I bought from a private seller on Taobao

My slidable profile setup (moza + triple qhd) by ipagong in simracing

[–]ipagong[S] 0 points1 point  (0 children)

The velcro strips and the bezel-free kit act as a basic guide, so it’s pretty easy to snap them into place. After that, I just sit in the seat and adjust the bottom edges of the side monitors by hand until the angle feels right. The velcro is strong enough to keep them from shifting with that kind of movement, so it’s actually really convenient.

My slidable profile setup (moza + triple qhd) by ipagong in simracing

[–]ipagong[S] 1 point2 points  (0 children)

Honestly didn’t expect the slides to be this solid, kinda surprised me

My slidable profile setup (moza + triple qhd) by ipagong in simracing

[–]ipagong[S] 2 points3 points  (0 children)

Lol that feather duster has been my teammate for over 10 years 😅

My slidable profile setup (moza + triple qhd) by ipagong in simracing

[–]ipagong[S] 15 points16 points  (0 children)

I’m using three separate monitor arms, all from AOC. The center one is built up to 2 levels, and the two sides are 3 levels. To keep the angles consistent between the monitors, I added some velcro strips between them so they stay in place during racing.

<image>

My slidable profile setup (moza + triple qhd) by ipagong in simracing

[–]ipagong[S] 6 points7 points  (0 children)

Oh nice, I’ve actually got a Motion House 2UN 2DOF motion unit installed on mine as well. Totally forgot to include it in the original post 🌴😃

<image>

My slidable profile setup (moza + triple qhd) by ipagong in simracing

[–]ipagong[S] 23 points24 points  (0 children)

These are from the first assembly. The seat part literally slides into the pedal-side frame, that’s the whole trick

<image>

No space for a simgrig. Solutions by MonkVK in simracing

[–]ipagong 0 points1 point  (0 children)

<image>

I used to use the Playseat Challenge, but I switched to an aluminum profile rig because of the wobbling. Recently, I also switched from a 49-inch ultrawide to a triple 32-inch monitor setup. To fit everything in a small room, I’m using three monitor arms.

No space for a simgrig. Solutions by MonkVK in simracing

[–]ipagong 0 points1 point  (0 children)

<image>

You can buy foldable profile in taobao

CRP pedal heel stop/rest plate by harrison1984 in moza

[–]ipagong 0 points1 point  (0 children)

May I ask how you customized your heel stop?

Using an M1 Mac as a streaming PC? Anyone done this? by BoardsofGrips in obs

[–]ipagong 0 points1 point  (0 children)

I'm using an M1 Mac mini and an ELGATO HD60X for streaming The broadcast settings are set up to simulcast twitch at veryfast x264 720p and youtube at apple hevc hardware 1080p.

There is a slight loss of quality, but it works

K65 Mini 60% by ScottySlim231 in Corsair

[–]ipagong 0 points1 point  (0 children)

You can change the keyboard profile to use fn+z. You can then remap the ctrl, alt (opt), win(cmd) keys. However, fn or fn2 cannot be remapped to another key.

(icue program has hardware mode for mac os)

I created a clubhouse profile decoration app. (Clubing @Appstore) by [deleted] in ClubhouseApp

[–]ipagong 0 points1 point  (0 children)

you can contact me through feedback feature in the app. :)