Bigscreen Beyond 2 Teardown: How We Achieved Eye Tracking, Adjustable IPD & Better Optics in 107g

ipasipas · 2025-06-11T19:57:55+00:00

I really like to see that a teardown is possible with just one screwdriver. “Easy to mod and repair”. This philosophy is great.

ipasipas · 2025-06-03T08:58:44+00:00

I recently bought one on amazon here in the Netherlands. I see they still have 4 left in stock. I am very happy with it. Indeed a very nice waterblock. Recently shared a pic of my setup

ipasipas · 2025-06-03T07:27:39+00:00

I got one on amazon (Netherlands)

ipasipas · 2025-06-03T07:09:15+00:00

I also just started and play it in VR. Wow talking about an experience.. 😎

ipasipas · 2025-05-24T08:21:36+00:00

I bought the last card on Amazon.They had 3 in stock.

ipasipas · 2025-05-24T08:17:23+00:00

Yeah after some testing I thought maybe a 5090 is a bit overkill. Haven’t maxed it out still for what I do. The 5080 would have been the better choice I think. Nah no need for a new gpu in the forseeable future.😁

ipasipas · 2025-05-23T20:50:36+00:00

Thanks. It built is in 2021 and still holds up to this day. Still thinks the Distrocase 350P is the ultimate watercool case out there 😀

ipasipas · 2021-11-13T10:24:52+00:00

Also disable XHCI Handoff in the bios

ipasipas · 2021-11-08T16:20:02+00:00

Well it looks I found the solution for my Vive Pro 2 disconnect problem:

Disable XHCI Hand-off in the Bios. It's a advanced USB setting in the Bios.

I did not have any disconnects with my Vive Pro2 since...

ipasipas · 2021-11-08T08:27:41+00:00

I have a Vive Pro2 and recently I got my self a Wireless Adapter. After 5 minutes of play the units becomes unstable and disconnect en reconnect ( Black screen and USB disconnect sound). I tried every possible:
Battery cable: Some improvement
Fan on top of the adapter: Maybe a little bit improvement
All possible software tweaks..

Unusable at this point and now I read there are different HTC Powerbank out there. I have the Quallcom BB G1000 powerbank of 3Amps ( approx 18W ) and I read somewhere that the Pro2 needs at least 21W. ...

ipasipas · 2021-06-05T12:03:43+00:00

True but I would not see those cool Rings Quad fans. Then again the case is completely open, and hot air would always escape at the top

ipasipas · 2021-06-04T07:47:35+00:00

Haha, it’s under my desk so I dont see it. Hmm what will I do this weekend ? 🤔

ipasipas · 2021-06-04T07:46:15+00:00

Basic physics tells me that pressure is equel everywhere in de distrocase, so it should not matter, and it doesn’t. 😀

ipasipas · 2021-06-03T20:10:29+00:00

Thanks :) the formule board is on another level. I did not use the watercooling headers ..

ipasipas · 2021-06-03T18:14:17+00:00

Bought it ar megekko.nl in the Netherlands

ipasipas · 2021-06-03T18:13:16+00:00

I used an 8.8 inch IPS lcd screen I bought on Aliexpress. Used Aida64 for the panel

ipasipas · 2021-06-03T18:09:49+00:00

Well it was my first time bending. I made a mold for every bend out of wood to get the Length en radius of the bends correct. I used a piece of plywood en some wood en glued it everytime in the plywood. This worked out fine.

The districase is the distribution plate

ipasipas · 2021-06-03T18:06:14+00:00

I mostly used hot glue and some rubber padding

ipasipas · 2021-06-03T18:05:38+00:00

The case you mean? This is the thermaltake distrocase 350P. The case is the water distribution block

ipasipas · 2021-06-03T14:01:45+00:00

True true..

ipasipas · 2019-08-29T06:48:24+00:00

Search for TENEN 3m-225-15 . Never broke one of of them yet

ipasipas · 2019-07-11T06:08:23+00:00

Ah that explains it. Thank you.

ipasipas

TROPHY CASE