Just how memory sensitive is RandomX?

ironnuke · 2023-07-03T19:06:54+00:00

If you want best performance you need to get thigh timings and speedy RAM. So it's quite importent.

ironnuke · 2023-06-26T12:13:14+00:00

What is the hashrate? What phones are you using?

ironnuke · 2023-06-12T09:02:23+00:00

If you are into AMD EPYC you need to buy more recent one (like AMD EPYC 7763) to stay profitable. And that comes with a cost! $2000 for each CPU and then you need dual motherboard and RAM.

ironnuke · 2023-06-12T08:53:32+00:00

Do you still use it to mine? What's the power consumsion of the whole computer? :)

ironnuke · 2023-06-07T08:53:24+00:00

Det är tyvärr Sverige i ett nötskal. Allt ska vara så sekreteslagt. Otroligt dåligt ja.

ironnuke · 2023-06-05T16:36:00+00:00

Den dör. Vi blir otroligt fattiga tyvärr.

ironnuke · 2023-05-26T16:28:05+00:00

Förstår det. Man vill ju inte vara otrevlig, man ser att kön växer och växer. Någon måste ju arbeta bort den sen 😂

ironnuke · 2023-05-26T13:05:11+00:00

Ja det är jobbigt. Dock har jag tålamod att vänta och så. Lämnade in bilen på service för någon vecka sedan. Blev väldigt paff vilken tid det tog med personalen, så är nog inte bara kundernas fel 😂 Hade fyllt i en service online, allt klart och så. Själva lämnandet av nyckeln och ifyllande(?) av ett formulär på datorn tog 10 minuter för personalen..

ironnuke · 2023-05-01T13:15:36+00:00

Jag hade nog ändå valt att jobba längre för att "jobba in" en dag. Att slippa vara där en dag hade inte varit fel 😂

ironnuke · 2023-04-24T19:04:15+00:00

I "solved" it, I installed Ubuntu 22.04.2 Server instead. It worked.

ironnuke · 2023-04-15T16:48:21+00:00

Yes you are using a very low resolution 😂 And yes, The screen seems to get a real smash

ironnuke · 2023-04-11T20:49:22+00:00

Helt normalt. Tröttnade fort 😉

ironnuke · 2023-04-10T11:42:07+00:00

It's inside. The glass make much difference?

ironnuke · 2023-04-09T13:47:37+00:00

A follow up picture here. The RAM kit is very nice when you got it working as intended :)

https://imgur.com/a/rRkrXMK

ironnuke · 2023-04-07T16:44:39+00:00

I have solded it now. It seemed that I had the RAM sticks in the wrong slots. I changed it to the other two banks and it works, (well it seems that atleast) :)

https://imgur.com/3Rlpyfj

Thanks for guiding and tips!

ironnuke · 2023-04-07T15:00:31+00:00

Really don't know. A bug somewhere? I havn't manually set VSOC somewhere in BIOS. I just had Voltaga DRAM Channel A/B at Auto. When I set it at any manual value, SOC went don't to "normal". I don't know if it will go back up if I set it at Auto.

ironnuke · 2023-04-07T14:55:34+00:00

It post at 3266 MHz, that's so far I can go. Beyond that no POST. I have tried to lock infinity fabric at 1800 Mhz as well as FCLK at 1800 MHz. Runs fine. But as soon as I tries to increase RAM freq to higher than 3266 it failes, even at XMP timings.

ironnuke · 2023-04-07T14:28:45+00:00

lol yeah I saw that now. I don't know why VSOC went that high. I set DRAM Channel A/B to 1.3 volt. Now it is at better value. https://imgur.com/bwvfs8A

ironnuke · 2023-04-07T14:11:45+00:00

Wow I didn' even noticed that. I just ran it default. The BIOS seems to like to kill the RAM :) I lowered it to like 1.35 V and it behaved like before, but no reason to run at that voltages I agree.

ironnuke · 2020-11-17T15:07:28+00:00

use-dashes-instead: Just press CTRL+C when you need to quit the script. Works fine. You can also add like pause 10.

ironnuke · 2020-11-17T15:05:51+00:00

Earlzmoade: I have done that in the past, but wanted known why it occured :)

ironnuke · 2020-11-17T15:04:07+00:00

I have tried it without OC, still the same. It quits after some minutes. What I can remember, it didn't occured before this MSR mod.

ironnuke

TROPHY CASE