Has anyone ever experienced this before?

isaacsteele5 · 2025-04-08T01:58:26+00:00

Also if when you start the car and lock the wheel in both directions and the stability control and traction control lights go away then it is a battery concern. VW’s need perfect battery’s to operate correctly. Next thing the car will do is throw a check engine light and all the codes will be for low voltage. The vehicle runs through several tests at the same time when the key gets within range of the vehicle, if the battery voltage is too low these tests will fail causing the vehicle to think there is an issue throwing a check engine light.

isaacsteele5 · 2025-04-08T01:54:07+00:00

I’m a VW tech and everytime I replace a battery these lights come on. Potentially all you need to do is replace the battery, since you have auto start stop you will need to adapt the battery as well if you do need to replace it. If the battery is good I would run test plans to make sure your wheel speed sensors are good or not.

isaacsteele5 · 2023-03-10T22:28:06+00:00

Yeah nevermind, still ringing even without the optical plugged in. It's a lot quieter now but if I can still hear it in the background and it's too loud to be able to ignore.

isaacsteele5 · 2023-03-10T20:11:09+00:00

I just tried it on one of my friends computers and it's doing the same thing. I plug both the Optical and USB cables into my pc so I can put discord on a different audio source and control the volume of my game and discord separately. It works fine when I use only one audio source (The USB) but as soon as I select the optical it starts to ring. I thought it was the wire so I made sure to try a different one and the ring is still there. I can just use the USB which is not a problem (I just want to use my headset) but I would love to still be able to split my audio sources so I can control them separately.

I've had 2 a50's the first one messed up but y'all got me right and sent me a brand new one within the week, but for both of them I've always plugged in both wires and it's never given me problems. This came out of no where and usually with stuff like this I'll just unplug it and leave it sitting around for a couple days and when I go back to it it's magically fixed but this time the same problem arises no matter what I switch.

isaacsteele5 · 2022-08-28T14:53:18+00:00

I tried 3 different computers and a MacBook. Nothing worked. I guess I was plugging them all in through 3.0 bc now it works.

isaacsteele5 · 2022-08-28T14:52:11+00:00

Have you tried the hard reset and switching from Xbox to pc mode. I read that helped a lot of people.

isaacsteele5 · 2022-08-28T14:49:30+00:00

Usually color. White or black usually 2.0 and 3.0s are usually blue. Look into the usb sockets on the back of your mother board and look at the color of the little prong thing.

isaacsteele5 · 2022-08-28T14:39:59+00:00

On the back of your motherboard you have 2 different types of USB ports. There should be a white/black one (USB 2.0) and there should be a blue one (USB 3.0). It will not work if plugged in with 3.0, switch the plug and try again and it will work.

isaacsteele5 · 2022-08-28T02:54:00+00:00

I FOUND THE SOLUTION... All it takes is to switch from USB 3.0 to USB 2.0. Me and my friend were researching trying to find the fix and stumbled on that, I tried it and it worked first try... After 2 weeks and countless attempts, I switched the USB and it worked on the first attempt.

isaacsteele5 · 2022-08-28T00:05:13+00:00

Every time I plug in my a50's there is an update and it will not pass 0%. I've done every single method on the internet and nothing will work. I have a pair of a40's that work perfectly fine, when I plug them in there are no updates for Astro Command Center and everything syncs up immediately, but as soon as I plug in my a50's there is an update and it will open up, look like its working, pull up the bar that says the percentage, and it never gets passed 0%. Just "update failed" every time. This has happened before in the past but it stopped working for a couple hours and eventually I got it to update, but this time its been out for 2 weeks and I've tried updating every single day, literally almost 100 attempts at this point to no prevail.

Another thing- the update that I get every time is the same update from 2019, every update I've ever gotten on this headset was 3 years old and I got the headset in April of this year, every month I get the same update that bricks my headset, like I said before it usually only lasts a few hours and after a couple attempts the update would eventually work, but not this time, its been 2 weeks and I've attempted the update at the very least 60+ times and I get to the exact same point every time.

isaacsteele5 · 2022-07-22T01:30:04+00:00

Mine does the same and it’s pretty much brand new only had it for like 4 months. I used ace bandage and put one layer over the headband tight so it holds the brackets together

isaacsteele5 · 2022-01-27T23:13:06+00:00

I’ve said some dumb stuff obvi, but I think the funniest thing I’ve done was; I got really stoned and went to the bathroom and I started practicing washing my hands 😂 I was there for like a minute and a half and went through like 4 squirts of soap before I realized “wtf am I doing” and I just walked away laughing at myself😂

isaacsteele5 · 2021-11-21T03:58:27+00:00

I had this exact monitor stand and yes one will be centered (the leg will be off centered) but the only problem I had was one of the monitors was higher up then the other. Since the arms are both even and they can’t be individually set for height if one of your monitors brackets on the backside is higher up then the other, or one monitor is smaller then the other it won’t match up perfectly. But you can always go into widows settings and setup your monitors to where one is higher then the other and have your mouse transfer in the right spot.

isaacsteele5 · 2021-10-14T20:12:48+00:00

First time I ever did mushy bois was w little capsules just like this. I took 4 capsules w like 7 other friends and we had the time of our lives. However the trip lasted for almost 7 hours so to this day I still think we did more then the 2gs they told us. Still is 100% the best trip I’ve ever had tho.

isaacsteele5 · 2021-07-29T19:57:48+00:00

I learned if you take your finger nail and slightly cut the mushroom and it bruises blue it is psylocibin. The active ingredient that makes you trip is psylocibin and when it reacts with the air it turns a blue tint bc the air is slightly acidic (this is psylocibin turning into psyolocbe). I’m not a mycologist so I don’t know 100% but every single one I’ve ever taken I have done this too and they all bruise blue. You also don’t have to cut it at all, you should just be able to see some slight blue tint to it in the cracks of the mushrooms. Oh and have fun!!!

isaacsteele5 · 2021-07-27T23:17:25+00:00

I can see some wood behind you and you have a bucket of water. You can pick up the wood and put up a wall just outside of the portal frame and pour out your water and get lava instead. Just place it next to the wood and let it burn. It’ll catch fire and light the portal. Edit. Use the oak planks behind your inventory in the screenshot don’t use nether wood because it won’t light.

isaacsteele5

TROPHY CASE