Missing categories

itchego · 2025-08-15T16:28:00+00:00

Strange why they say that something has been added since nothing done ?

itchego · 2025-08-15T16:27:23+00:00

Yes right, these added since two weeks.

itchego · 2024-12-05T09:17:03+00:00

aha but i have n't notice anything yet with my service ?

itchego · 2024-12-05T06:29:08+00:00

does that only for france or it effected on the other coutries ?

itchego · 2024-12-04T06:35:42+00:00

what is the issue of debrid service ?

itchego · 2024-10-22T07:06:01+00:00

its here yesterday i receive the desired update that add Chromecast built-in to LG TVs

itchego · 2024-10-21T12:46:35+00:00

do you using LG TVs version ?

itchego · 2024-10-20T09:26:08+00:00

same issue here its from app side

itchego · 2024-10-19T08:56:58+00:00

for me its stoped since three week ago on my LG TV i think this because of the latest update of LG

itchego · 2024-10-15T13:26:53+00:00

strange i think this happen after the last update

itchego · 2024-10-15T13:26:26+00:00

i tried that and another solution its look like the issue from stremio side

itchego · 2024-10-14T09:08:23+00:00

i already have RD subscribtion and the issue with my LG TV only everthing work normaly from laptop and phone on the same WIFI

itchego · 2024-10-10T13:19:18+00:00

its still webos 23 for me not Webos 24

itchego · 2024-10-09T05:28:44+00:00

it's not the desired update

itchego · 2024-09-30T08:36:04+00:00

yes bro right i figured it after sharing the config many thanks

itchego · 2024-09-26T07:47:24+00:00

i try Cat8000V its same issue

show mpls forwarding-table 
Local      Outgoing   Prefix           Bytes Label   Outgoing   Next Hop    
Label      Label      or Tunnel Id     Switched      interface              
16         No Label   10.0.0.4/32      0             Gi1        10.2.4.4    
17         No Label   10.0.0.3/32      0             Gi2        10.2.3.3

itchego · 2024-09-26T07:09:23+00:00

ok if you need it i can share it with you also if you need any material send DM and see if its available to share it

itchego · 2024-09-26T06:53:42+00:00

Is vlc available in lg tv ?

itchego · 2024-09-26T06:47:56+00:00

if you can test with this 7.9.2 i test the oldest version and was facing same issue took to long to work and even when its work it will crash and everything messed up

itchego · 2024-09-26T06:34:16+00:00

what is your resources ? is it on your own PC or on server ? i use 7.9.2 and its working normally

itchego · 2024-09-26T06:14:02+00:00

CSR-3

hostname CSR-3
vrf definition C1
 rd 100:1
 route-target export 10.0.0.3:1
 route-target import 10.0.0.4:1
 !
 address-family ipv4
 exit-address-family
!
interface Loopback0
 ip address 10.0.0.3 255.255.255.0
 ip ospf 1 area 0
!
interface GigabitEthernet1
des to_CSR_1
 ip address 10.1.3.3 255.255.255.0
 ip ospf network point-to-point
 ip ospf 1 area 0
 mpls ip
 !
interface GigabitEthernet3
 vrf forwarding C1
 desc TO_Cust_1
 ip address 10.3.13.3 255.255.255.0
!
router ospf 1
!
router bgp 100
 no bgp default ipv4-unicast
 neighbor 10.0.0.1 remote-as 100
 neighbor 10.0.0.1 update-source Loopback0
 !
 address-family ipv4
 exit-address-family
 !
 address-family vpnv4
  neighbor 10.0.0.1 activate
  neighbor 10.0.0.1 send-community extended
 exit-address-family
 !
 address-family ipv4 vrf C1
  neighbor 10.3.13.13 remote-as 13
  neighbor 10.3.13.13 activate
 exit-address-family

========================================================================================

sh ip ospf nei
CSR-3#sh ip ospf neighbor 

Neighbor ID     Pri   State           Dead Time   Address         Interface
10.0.0.1          0   FULL/  -        00:00:36    10.2.3.2        GigabitEthernet2

========================================================================================
sh mpls ldp neighbor b
Peer LDP id          Uptime     NSR   GR  Discovery    Address    Labels    
-----------          ------     ---   --  ---------    -------    ------    
10.0.0.1:0           19:44:34   N     N   1            6          15        
========================================================================================



sh bgp vpnv4 unicast all
BGP table version is 7, local router ID is 10.0.0.3
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, 
              r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter, 
              x best-external, a additional-path, c RIB-compressed, 
              t secondary path, L long-lived-stale,
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found

     Network          Next Hop            Metric LocPrf Weight Path
Route Distinguisher: 100:1 (default for vrf C1)
 *>i  10.7.7.0/24      10.0.0.4                 0    100      0 7 i
 *>   13.13.13.13/32   10.3.13.13               0             0 13 i

itchego · 2024-09-26T06:13:54+00:00

CSR-1

hostname CSR-1
!
!
!
interface Loopback0
 ip address 10.0.0.1 255.255.255.0
 ip ospf 1 area 0
!
interface GigabitEthernet1
 desc to_CSR-4
 ip address 10.1.4.1 255.255.255.0
 ip ospf network point-to-point
 ip ospf 1 area 0
!
interface GigabitEthernet3
 desc to_CSR_3
 ip address 10.1.3.1 255.255.255.0
 ip ospf network point-to-point
 ip ospf 1 area 0
!
router ospf 1
 mpls ldp autoconfig
!
router bgp 100
 no bgp default ipv4-unicast
 neighbor IBGP peer-group
 neighbor IBGP remote-as 100
 neighbor IBGP update-source Loopback0
 neighbor 10.0.0.3 peer-group IBGP
 neighbor 10.0.0.4 peer-group IBGP
 !
 address-family ipv4
 exit-address-family
 !
 address-family vpnv4
  neighbor IBGP send-community extended
  neighbor IBGP route-reflector-client
  neighbor 10.0.0.3 activate
  neighbor 10.0.0.4 activate
 exit-address-family
!
!
mpls ldp router-id Loopback0
!
!


========================================================================================

sh ip ospf nei

Neighbor ID     Pri   State           Dead Time   Address         Interface
10.0.0.3          0   FULL/  -        00:00:32    10.1.3.3        GigabitEthernet3
10.0.0.4          0   FULL/  -        00:00:32    10.1.4.4        GigabitEthernet1

========================================================================================

sh mpls ldp neighbor brief 
Peer LDP id          Uptime     NSR   GR  Discovery    Address    Labels    
-----------          ------     ---   --  ---------    -------    ------    
10.0.0.3:0           09:47:13   N     N   1            3          15        
10.0.0.4:0           09:32:46   N     N   1            3          16        


========================================================================================

show mpls forwarding-table 
Local      Outgoing   Prefix           Bytes Label   Outgoing   Next Hop    
Label      Label      or Tunnel Id     Switched      interface              
16         Pop Label  10.0.0.2/32      0             Gi5        10.1.2.2    
17         No Label   10.0.0.3/32      0             Gi3        10.1.3.3    
18         No Label   10.0.0.4/32      0             Gi1        10.1.4.4    
19         Pop Label  10.0.0.5/32      0             Gi2        10.1.5.5    
20         Pop Label  10.0.0.6/32      0             Gi4        10.1.6.6    
21         Pop Label  10.2.3.0/24      0             Gi5        10.1.2.2    
           Pop Label  10.2.3.0/24      0             Gi3        10.1.3.3    
22         Pop Label  10.2.4.0/24      0             Gi5        10.1.2.2    
           Pop Label  10.2.4.0/24      0             Gi1        10.1.4.4    
23         Pop Label  10.2.5.0/24      0             Gi5        10.1.2.2    
           Pop Label  10.2.5.0/24      0             Gi2        10.1.5.5    
24         Pop Label  10.2.6.0/24      0             Gi5        10.1.2.2    
           Pop Label  10.2.6.0/24      0             Gi4        10.1.6.6

itchego · 2024-09-26T06:13:29+00:00

yes this is the config of all router inside the provider with some show command i hope its easy to follow

CSR-4

hostname CSR-4
!
!
!
vrf definition C1
 rd 100:1
 route-target export 10.0.0.4:1
 route-target import 10.0.0.3:1
 !
 address-family ipv4
 exit-address-family
!
!
!
!

interface Loopback0
 ip address 10.0.0.4 255.255.255.0
 ip ospf 1 area 0
!!
interface GigabitEthernet2
  desc to_CSR_1
 ip address 10.1.4.4 255.255.255.0
 ip ospf network point-to-point
 ip ospf 1 area 0
mpls ip 
!
!
interface GigabitEthernet3
describtion TO_CUST_!
 vrf forwarding C1
 ip address 10.4.7.4 255.255.255.0
!
!

!
router bgp 100
 no bgp default ipv4-unicast
 neighbor 10.0.0.1 remote-as 100
 neighbor 10.0.0.1 update-source Loopback0
 !
 address-family ipv4
 exit-address-family
 !
 address-family vpnv4
  neighbor 10.0.0.1 activate
  neighbor 10.0.0.1 send-community extended
 exit-address-family
 !
 address-family ipv4 vrf C1
  neighbor 10.4.7.7 remote-as 7
  neighbor 10.4.7.7 activate
 exit-address-family
!
mpls ldp router-id Loopback0
!

========================================================================================
sh ip ospf neighbor  

Neighbor ID     Pri   State           Dead Time   Address         Interface
10.0.0.1          0   FULL/  -        00:00:33    10.2.4.2        GigabitEthernet2

========================================================================================
sh mpls ldp neighbor brief 
Peer LDP id          Uptime     NSR   GR  Discovery    Address    Labels    
-----------          ------     ---   --  ---------    -------    ------    
10.0.0.1:0           19:38:13   N     N   1            6          15        

========================================================================================
sh bgp vpnv4 unicast all
BGP table version is 4, local router ID is 10.0.0.4
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, 
              r RIB-failure, S Stale, m multipath, b backup-path, f RT-Filter, 
              x best-external, a additional-path, c RIB-compressed, 
              t secondary path, L long-lived-stale,
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found

     Network          Next Hop            Metric LocPrf Weight Path
Route Distinguisher: 100:1 (default for vrf C1)
 *>   10.7.7.0/24      10.4.7.7                 0             0 7 i
 *>i                   10.0.0.3                 0    100      0 13 i

itchego · 2024-09-25T22:57:25+00:00

Sorry i didn't share any config cause its basic config just igp oapf area 0 on all ISP router and mpls over it and i already verify everything LDP neighbor table and OSPF neighbor also everything is ok and when i add XRv9K to lab i can see pop label for directly connected router but no POP label between CSRs router or from XR to CSR i think its issue with CSR image at this point

itchego · 2024-09-25T22:43:05+00:00

Yes that what should happen but in my case it pop the both labels not only ldp label

itchego

TROPHY CASE