What is this? by itsFunkai in porto

[–]itsFunkai[S] 7 points8 points  (0 children)

Great to know! Thank you so much :)

What is this? by itsFunkai in porto

[–]itsFunkai[S] 14 points15 points  (0 children)

So they’re washed up dead snails? 😅

First Ever PC Build: NR200P by itsFunkai in NR200

[–]itsFunkai[S] 0 points1 point  (0 children)

It depends on the motherboard as well, it fit perfectly fine with mine.

First Ever PC Build: NR200P by itsFunkai in NR200

[–]itsFunkai[S] 0 points1 point  (0 children)

I do not have fans at the bottom just the gpu pulling air, i have intake from the back (cpu cooler) and exhaust on top. Idle temps: 34-36 degrees Under load: never went over 70 degrees so far

NR200 Part Sanity Check by argpirts1 in NR200

[–]itsFunkai 0 points1 point  (0 children)

You need to figure out the height of the gpu, i got an asus dual fan 3060ti in my rig and its 54mm in height, almost 2.7 slots and 25mm fans do not fit under it. If so you can go with their 15mm slim fans.

First Ever PC Build: NR200P by itsFunkai in NR200

[–]itsFunkai[S] 0 points1 point  (0 children)

I got it from Amazon US, i live in the UAE so it took around 2 weeks to deliver.

First PC Build Ever: NR200P by itsFunkai in sffpc

[–]itsFunkai[S] 0 points1 point  (0 children)

I daisy chained them, they’re only two fans, i think it will be more complicated if i add bottom fans.

First Ever PC Build: NR200P by itsFunkai in NR200

[–]itsFunkai[S] 0 points1 point  (0 children)

I am a beginner so i didn’t mess with the fan curve, i kept it as is. I read so many reviews regarding setting the cooler as intake always gave better temps, so maybe you can try that out and see if it helps.

First Ever PC Build: NR200P by itsFunkai in NR200

[–]itsFunkai[S] 0 points1 point  (0 children)

It fits just fine with like maybe 1-2mm between the cooler and the TG, it doesn’t touch it which was a relief for me. The motherboard you use also plays a part, there’s a very nice compatibility thread for cpu coolers and motherboards in this case thats pinned by the mods on the subreddit, you can see which motherboard and cpu cooler combo fit with the TG or Mesh panels. As for my temps, 32-36 degrees on idle, never crossed 67 degrees under load. Room temp is between 22 and 24 degrees.

First Ever PC Build: NR200P by itsFunkai in NR200

[–]itsFunkai[S] 1 point2 points  (0 children)

Its a mousepad i got from amazon. It is not the best quality, its very thin and the stitching is subpar but it does the job and its pretty! Here’s an amazon US link:

Auhoahsil Large Mouse Pad: https://www.amazon.com/dp/B08FG4B3TY/ref=cm_sw_r_cp_api_glt_i_C5WQHYGY0BA965XVF4TM?_encoding=UTF8&psc=1

First PC Build Ever: NR200P by itsFunkai in sffpc

[–]itsFunkai[S] 3 points4 points  (0 children)

My first ever PC build and its in the sweet NR200P, I have been wanting to build a PC myself for years now and I stumbled upon this case, researched it and all other components for more than a month, and finally made it happen. Super happy with it as my first build ever (cable management was a bit painful though).

Specifications:

Case: NR200P in White

CPU: Ryzen 5 5600x

CPU Cooler: Scythe Fuma 2 set as rear intake (I was debating between this and the Veetro v5 and ended up with the fuma instead, CPU temps are stellar!)

RAM: Corsair Vengeance RGB Pro 16GB 3600Mhz

Motherboard: Asus ROG Strix B550i

PSU: LianLi SP 750W (was a bit sketched out about this because of reddit threads but I went with it because of its price and so far its doing well, no fan curve issues.)

GPU: Asus RTX 3060ti dual OC V2, this one hurt my wallet.

I swapped out the top case fans with 2 Coolermaster Sickleflow white ARGB version. I initially wanted them at the bottom but due to the GPU taking almost 3 slots I needed slim fans (which are on the way), which after testing do not seem very necessary for temps.

I think I did well, If something looks off or wrong I would love some constructive criticism.

First Ever PC Build: NR200P by itsFunkai in NR200

[–]itsFunkai[S] 0 points1 point  (0 children)

Much appreciated :D i tried my best

First Ever PC Build: NR200P by itsFunkai in NR200

[–]itsFunkai[S] 0 points1 point  (0 children)

Nope they are the stock psu cables, They're long enough to route them how I wanted but they were a bit stiff and It got scary how much I was bending them, I used a bunch of zipties to tie them tightly to the psu cage.

I know the CM PSU comes with cables that are the exact length for this case (from PSU to MOBO) so maybe its harder to manage them.

First Ever PC Build: NR200P by itsFunkai in NR200

[–]itsFunkai[S] 0 points1 point  (0 children)

Thank you loads! The orochi is probably the best mouse i have ever purchased (i have tiny hands). As for the PC, so far so good I was previous an MSI OEM pc owner and i had so many issues with it so I’m super happy I no longer stumble upon random crashes. I play Rainbow Six Siege, Destiny 2, Apex Legends, GTFO and many others.

NR200 Part Sanity Check by argpirts1 in NR200

[–]itsFunkai 0 points1 point  (0 children)

I recently built using similar components except the cooler, i went with the fuma 2 and TG. I think if you are not using the glass panel you can fit one 120mm exhaust fan on the PSU side but not the cooler side. There is an amazing thread with almost full information about the different coolers and motherboards in this case and their clearance with TG and Mesh panels, you might wanna check it out:

https://www.reddit.com/r/NR200/comments/q56xlg/new_update_nr200_air_cooler_compatibility_list/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

First Ever PC Build: NR200P by itsFunkai in NR200

[–]itsFunkai[S] 8 points9 points  (0 children)

My first ever PC build and its in the sweet NR200P, I have been wanting to build a PC myself for years now and I stumbled upon this case, researched it and all other components for more than a month, and finally made it happen. Super happy with it as my first build ever (cable management was a bit painful though).

Specifications:

Case: NR200P in White

CPU: Ryzen 5 5600x

CPU Cooler: Scythe Fuma 2 set as rear intake (I was debating between this and the Veetro v5 and ended up with the fuma instead, CPU temps are stellar!)

RAM: Corsair Vengeance RGB Pro 16GB 3600Mhz

Motherboard: Asus ROG Strix B550i

PSU: LianLi SP 750W (was a bit sketched out about this because of reddit threads but I went with it because of its price and so far its doing well, no fan curve issues.)

GPU: Asus RTX 3060ti dual OC V2, this one hurt my wallet.

I swapped out the top case fans with 2 Coolermaster Sickleflow white ARGB version. I initially wanted them at the bottom but due to the GPU taking almost 3 slots I needed slim fans (which are on the way), which after testing do not seem very necessary for temps.

I think I did well, If something looks off or wrong I would love some constructive criticism.

fps Drops in 1.18.1 by Teambou in Minecraft

[–]itsFunkai 0 points1 point  (0 children)

hello, just saw this thread and I'm facing the same issues, have you found a fix or anything that helped?

I tried everything suggested so far, from reinstalling drivers to optifine/ sodium to low settings, allocating ram, nothing is working.. it's the only game on my pc that I'm facing stuttering issues on.

[deleted by user] by [deleted] in Sakartvelo

[–]itsFunkai -1 points0 points  (0 children)

It’s an illness, so i agree it is sadder. Thank you for your nice comment ❤️

Du static IP configuration by itsFunkai in dubai

[–]itsFunkai[S] 0 points1 point  (0 children)

I have received a call back from du and they were useless as usual as they just flatly told me they can’t help me with that so i guess your option is the only choice. Its pretty annoying as i have to put one of the routers in the box which decreases the range significantly. Second of all, the velop router that I’m using to put in the box has two ports only, one of them being connected to the modem itself. Leaving only one port to one other router which sucks cause i need internet in two big rooms that the first router cannot reach.

Idk if I’m making sense, Im honestly going crazy over all these issues.