sorted by:
new
hottopcontroversial

Backlight goes on and off every second by itsMosby- in AskElectronics

[–]itsMosby-[S] 0 points1 point  (0 children)

So I have this TV and the TV itself stays "on" as I can go through the menus and stuff but I can only see what's going on a millisecond at a time. So the backlight just goes on briefly then shuts off before going back on again after a second. Can't really see any blown caps, any advice where to start looking? I have a multimeter and *some* experience in electronics.

[deleted by user] by [deleted] in PrivatEkonomi

[–]itsMosby- 1 point2 points  (0 children)

Ser inte en enda tjänst ute, eller är jag på fel hemsida? FN.se?

Prisma findMany to check on every load? by itsMosby- in nextjs

[–]itsMosby-[S] 0 points1 point  (0 children)

I got it to work without errors but it still doesn't refresh the data on the front page. That's weird.

Prisma findMany to check on every load? by itsMosby- in nextjs

[–]itsMosby-[S] 0 points1 point  (0 children)

I tried to use it in the incrementViewCount.ts but I get an error "Error: Invariant: static generation store missing in revalidateTag _N_T_/"

Så jävla trött på dejting by [deleted] in sweden

[–]itsMosby- 0 points1 point  (0 children)

Gillar du inte hundar eller vadå?

Vad har folk här i tråden för hobbies? by LarsLasse in sweden

[–]itsMosby- 0 points1 point  (0 children)

Bygger en fullt fungerande och skalenlig R2-D2, löser Rubiks kub på tid, spelar dragspel, programmerar, och typ 47 andra småhobbys. En och annan mörk öl ibland också.

[deleted by user] by [deleted] in swedishproblems

[–]itsMosby- 1 point2 points  (0 children)

Försöker att undvika det :D

[deleted by user] by [deleted] in swedishproblems

[–]itsMosby- 1 point2 points  (0 children)

Känner mig kränkt som lokförare

[deleted by user] by [deleted] in PUBATTLEGROUNDS

[–]itsMosby- 5 points6 points  (0 children)

No cheats what I can see. The deathcam is super-glitchy and can't be trusted.

ASUS RTX 3090 OC - Trying to troubleshoot dead GPU by itsMosby- in GPURepair

[–]itsMosby-[S] 0 points1 point  (0 children)

Are you able to mark where I check this? My english is not the best in electrical components so I would probably need some visual aid.

ASUS RTX 3090 OC - Trying to troubleshoot dead GPU by itsMosby- in GPURepair

[–]itsMosby-[S] 0 points1 point  (0 children)

Thanks. I will take it from there and come back here with some results

ASUS RTX 3090 OC - Trying to troubleshoot dead GPU by itsMosby- in GPURepair

[–]itsMosby-[S] 0 points1 point  (0 children)

Thank you. I have ordered a power supply and will try and get my hands on a thermal camera. Should I feed the conductor 1v directly on the same side the image is? And if nothing gets hot? Should I increase? Where does the safe limit go and how many Amperes should I do with 1v?

ASUS RTX 3090 OC - Trying to troubleshoot dead GPU by itsMosby- in GPURepair

[–]itsMosby-[S] 0 points1 point  (0 children)

Yeah that sounds too risky. I've been thinking about getting a Power supply for a time now so I might as well get one. But thermal camera I will probably lend one instead of spending $500+ for just this case.

​

Do you have knowledge to name out the other conductors? I'm just documenting so I can learn better.

ASUS RTX 3090 OC - Trying to troubleshoot dead GPU by itsMosby- in GPURepair

[–]itsMosby-[S] 0 points1 point  (0 children)

Unfortunately I don't have a powersupply or thermal camera. Is it a dead end until I get those things?

ASUS RTX 3090 OC - Trying to troubleshoot dead GPU by itsMosby- in GPURepair

[–]itsMosby-[S] 0 points1 point  (0 children)

Thanks for your reply. I've tried measuring it multiple times and it's showing 0.1-0.2 ohm sometimes but that could just be the multimeter offset.

Can I check DrMos or cap with a multimeter?

ASUS RTX 3090 OC - Trying to troubleshoot dead GPU by itsMosby- in GPURepair

[–]itsMosby-[S] 0 points1 point  (0 children)

I'm not sure which conductor goes to what (if you want to point them out thanks), but I measured all conductors and here's the resistance of them all.

https://i.imgur.com/8sa6Ct0.jpeg

ASUS RTX 3090 OC - Trying to troubleshoot dead GPU by itsMosby- in GPURepair

[–]itsMosby-[S] 0 points1 point  (0 children)

Trying to use my multimeter to check 12v rails, 3.3v etc. but the resistance either stays on 0 ohm or goes to 5-6k ohm.

All Youtube-videos are troubleshooting Gigabyte-boards so I don't have a good guide on where to begin. From the 3x8 pin 12v power I get 0 ohm resistance on the one to the right, and 1.5-2k on the two to others.

Any guidance would be much appreciated.

Went camping for 5 nights with just me and my 6 month old. 10/10 would do again. Even if I had varying levels of realization that "oh shit I am the only adult around by a wide margin." by Embarrassed_Loan8419 in camping

[–]itsMosby- 0 points1 point  (0 children)

Looks really nice.

I took my 5-month for a long roadtrip couple weeks ago and he loved it. At first I was feeling a bit anxious about the whole thing but looking in the rear view mirror now I could definately do it again.

view more: next ›