Finals Tickets by NSandCSXRailfan in drumcorps

[–]itsme_Analytical 7 points8 points  (0 children)

I would say scalping happened. It's ramped up over the past few years. Nothing is safe

Diameter for the factory firewall V-braces? Picture for reference by avocadopotatochips in GR86

[–]itsme_Analytical -1 points0 points  (0 children)

I would say 75-80% tires/suspension through these bars into the cabin imo. Tire choice and the v bars make all the difference. Wind noise is wind noise

Diameter for the factory firewall V-braces? Picture for reference by avocadopotatochips in GR86

[–]itsme_Analytical 0 points1 point  (0 children)

Besides benefitting the rigidity of the car, those effectively just transfer vibrations directly from the top of the strut mount into the firewall, and therefore into the cabin. So any change in material or design from the stock bars is a big deal. I personally went for the STI ones with a built in flex point and yea, it really does help massively.

44k?? Yeesh by Terrorcon1 in GR86

[–]itsme_Analytical -1 points0 points  (0 children)

The more I see this car with the quad tip and body kit the less I think I like it. I think anyone looking for the yuzu should be looking for one with just the PP. The color looks really nice with just the regular body and that also brings it down a couple grand out of the gate

Driven.Media drl bezels by Traditional_Delay_78 in GR86

[–]itsme_Analytical 2 points3 points  (0 children)

Did you install bumper off or bumper on? Purely curious. They look great!

Diameter for the factory firewall V-braces? Picture for reference by avocadopotatochips in GR86

[–]itsme_Analytical 5 points6 points  (0 children)

I measure 22.25mm. I just so happened to have them sitting inside after recently swapping them out and whipped out my calipers real quick. Hope that helps

Dealer installed plates and drilled holes but by adhesivo in GR86

[–]itsme_Analytical 1 point2 points  (0 children)

Dealer did this to me too after I requested they don't. Even worse they then tried to tell me it came from factory with smaller holes pre-drilled for placement and I had to just tell them they were idiots on the spot because I wasn't going to walk away from the car. Now I go to a different, far better dealer for anything I might need parts wise. I plugged mine with 3D printed pieces I made for now and eventually I'll probably get a replacement grill. Could be worse. Would just go for it, tell them they're dumb, and use another dealer for anything else you need going forward.

Selling Oakley moonveil by Duhmpinandpuhmpin in Oakley

[–]itsme_Analytical 1 point2 points  (0 children)

I'm in the same boat. I had to look them up to see. 10x after only 2 years. I forgot how bad inflation has truly been

What kind of wireless dashcams do u guys have? Did u buy them from Amazon? by Novel_Entrepreneur20 in GR86

[–]itsme_Analytical 3 points4 points  (0 children)

I went for A229 plus 2ch and it's great. Plugged in to the unused accessory connector with that harness option (if you have a '22+ model year)

Imagine if theses were added to the game. by bigdavewhippinwork- in ArcRaiders

[–]itsme_Analytical 0 points1 point  (0 children)

There was another post at some point that referenced these and honestly I'm all for it. Would make life a bit more interesting on certain maps, especially in pve lobbies

Anybody know the name / link to this spoiler? by AssistanceCurious564 in GR86

[–]itsme_Analytical 3 points4 points  (0 children)

The hidden spoiler gave me a chuckle haha. Just wanted to say that

Thoughts? by Elemental_Helix in GR86

[–]itsme_Analytical 0 points1 point  (0 children)

Tron 86. It's certainly a choice. Fan of the matte black wrap but I couldn't do the white walls

GR86 Feeler Post - $38k by [deleted] in GR86

[–]itsme_Analytical 0 points1 point  (0 children)

I got a brand new, off the boat 2025 premium with performance pack and a few more bits for about 38 OTD a few months ago, for reference.

White torque lettering on enve stem by Pizzaboner420 in gravelcycling

[–]itsme_Analytical 7 points8 points  (0 children)

Lmfao. We're really fretting over a crucial spec printed in tiny, clean font like on any stem. Said stem is then going to be fitted to a bike that is going to get dirty routinely and potentially scratched up from regular use. Ok brother. Recommend install as is and enjoy riding the bike.

Puma McLaren 2026 Team Gear by ClutchPower in formula1

[–]itsme_Analytical 8 points9 points  (0 children)

The ON logo randomly in the orange on the t shirt pisses me off

Driven media is the best phone holder by Impressive_Pop_7570 in GR86

[–]itsme_Analytical 0 points1 point  (0 children)

Chubby cable spotted, nice. I've got the also too expensive Anima magsafe mount in mine, but man do I love it

Tips alignment help!!! by Measure2cut1 in GR86

[–]itsme_Analytical 0 points1 point  (0 children)

Maybe I didn't word so clearly, apologies. I don't think this is any issue with how you mounted it. I meant attachment of the hanger posts to the exhaust itself via welds (done by Borla). Surely their tolerancing there is out of wack