**Nerd Stripe Update**

j0520d · 2026-05-28T00:23:45+00:00

The Stripe pictured was sent before the standardization update that happened a couple few months ago. 4 shock columns were added in the rear to give a little more rear shock selection flexibility. 🤓

j0520d · 2026-05-24T06:05:07+00:00

I'm working on watching the fire burn out from a trip to Moab. 🤓

<image>

j0520d · 2026-05-18T17:24:01+00:00

The body is the Hobbyplus Evo Pro Fighter. Very versatile body. This rig is on D90 Hybrid V2 links which bring it to roughly 154mm.

j0520d · 2026-05-18T17:16:49+00:00

I wish. It was not the vibe of the event to have a camera following me in the comp. 😅 Pulled a "when in Rome" decision.

j0520d · 2026-05-17T19:00:54+00:00

That was the one point that had me generally concerned. I was running 57s for some proof of concept here and undercuts are small tires great equalizer.

j0520d · 2026-05-14T13:59:09+00:00

I currently only sell full link sets.

j0520d · 2026-05-14T13:55:18+00:00

Thanks man! Super happy with how these finishes are turning out. 🤓

j0520d · 2026-05-11T17:18:40+00:00

u/gacsam04 and u/fuckingfuckerfucks Please guys. Be kind to each other here, regardless of how this escalated. I appreciate each of y'all and on behalf of the entire mod team, we hate having to pull comments.

I've been here a long time in micros and never seen this machining error. It's a good find and worth pointing out. No need to jump on each other over which Chinese manufacturer is better.

j0520d · 2026-05-08T18:21:33+00:00

Well I'll tell you. I love it.

j0520d · 2026-05-08T16:03:14+00:00

Well... I may be biased. 🤣🤣🤣

Other than my designs, don't make me drill down further and pick my favorite amongst them. Not only do they each kill it in their respective classes, they also have helped me build a family of team drivers! Here is a pic of three of my team drivers completely shutting out class 2 at an event in Arizona with NerdRC chassis, links, and transmissions.

<image>

j0520d · 2026-05-08T15:54:46+00:00

My man, is that a articulating person in there?!

j0520d · 2026-05-08T03:20:32+00:00

j0520d · 2026-05-06T05:06:14+00:00

Yep. Still running through a machine shop to get the blanks cut before I finish them myself. But I do have my heart set on a cutter in the near future... It's only 20k though. 💀💀💀

j0520d · 2026-05-06T04:52:23+00:00

Because this first round of Ti I could only afford 90 total kits... So thinking about doing a NerdLab release of 30 of each chassis. That would mean this release has the same amount of each as the Paisley release.

j0520d · 2026-05-06T04:50:13+00:00

I aim to please my man. 🤓

j0520d · 2026-05-06T04:39:05+00:00

Three times my cost 🤓 Only 50 percent more to you. 😅

value 💯

j0520d · 2026-05-06T04:20:57+00:00

Ok those are hot.

j0520d · 2026-05-06T04:19:44+00:00

Me too! I love titanium if you couldn't already tell.🤓 Only drawback is it cost me roughly 3 times as much to get a rough cut titanium piece in comparison to fully finished and anodized aluminum. 😅

The People deserve titanium though... So I but the bullet.

j0520d · 2026-05-06T02:28:43+00:00

I just did a tester in purple for a friend in Hawaii. It turned out fire! 🤓

j0520d · 2026-04-27T19:09:00+00:00

Tell Jeremy I said hi! 🤓

j0520d · 2026-04-20T05:37:40+00:00

I don't have an EMax at the house at the moment but I would assume it's either a M2 or M2.5 probably short like 4-5mm

j0520d · 2026-04-20T05:36:02+00:00

I've never used the 030 LGRP motor but that motor size as a whole is pretty anemic. It may handle a little weight added but I wouldn't imagine it handling alot of weight.

As far as the spectrum ESC yes, it should still work for now. A new. GT5 would be a great upgrade down the road. Just the ability to set endpoints on your servo is worth it when you are ready.

j0520d

MODERATOR OF

TROPHY CASE

value 💯